Physical Properties and Seepage Characteristics of Optimized Fiber-Reinforced Permeable Concrete
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 5
Abstract
Permeable concrete is required to have adequate strength, water permeability, and freeze-thaw resistance as pavement material. The purpose of this research is to improve the properties of fiber-reinforced permeable concrete (FRPC) based on orthogonal experimental design by adjusting water-cement ratio (), target porosity, volume content of polyacrylonitrile fiber (PANF), and polypropylene plastic fiber (PPF). Computer tomography (CT) is applied to generate the three-dimensional (3D) pore structure model of optimized FRPC for permeability prediction and seepage flow simulation by the computed fluid dynamics (CFD) method. The results show that the FRPC with of 0.37, target porosity of 20%, PANF volume content of 0.16%, and PPF volume content of 0.25% can obtain reasonable strength (compressive , flexural ), high water permeability (permeability ), and adequate frost resistance (freeze-thaw ). The permeability coefficient obtained by numerical simulation shows error less than 10% in comparison with experimental results. The relationship of seepage velocity and pressure gradient confirms to Darcy-Forchheimer’s law and the critical Reynolds number for optimized FRPC with aggregate sizes of is 21.92.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study is financially supported by Water Conservancy Scientific Research and Technology Extension Project of Shandong Province (SDSLTG201604).
References
Afroughsabet, V., L. Biolzi, and T. Ozbakkaloglu. 2017. “Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete.” Constr. Build. Mater. 181 (Dec): 273–284. https://doi.org/10.1016/j.compstruct.2017.08.086.
Akand, L., M. Yang, and Z. Gao. 2016. “Characterization of pervious concrete through image based micromechanical modeling.” Constr. Build. Mater. 114 (Jul): 547–555. https://doi.org/10.1016/j.conbuildmat.2016.04.005.
Bhutta, M. A. R., K. Tsuruta, and J. Mirza. 2012. “Evaluation of high-performance porous concrete properties.” Constr. Build. Mater. 31 (Jun): 67–73. https://doi.org/10.1016/j.conbuildmat.2011.12.024.
Chang, J. J., W. Yeih, T. J. Chung, and R. Huang. 2016. “Properties of pervious concrete made with electric arc furnace slag and alkali-active slag cement.” Constr. Build. Mater. 109 (Apr): 34–40. https://doi.org/10.1016/j.conbuildmat.2016.01.049.
Chung, S. Y., T. S. Han, S. Y. Kim, and T. H. Lee. 2014. “Investigation of the permeability of porous concrete reconstructed using probabilistic description methods.” Constr. Build. Mater. 66 (15): 760–770. https://doi.org/10.1016/j.conbuildmat.2014.06.013.
Deo, O., and N. Neithalath. 2010. “Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features.” Mater. Sci. Eng. 528 (1): 402–412. https://doi.org/10.1016/j.msea.2010.09.024.
Fu, T. C., R. Huang, W. C. Yeih, J. J. Chang, and P. C. Lee. 2015. “Study of the pervious concrete properties using the experimental design method.” Adv. Mater. Res. 1089 (Jan): 253–264. https://doi.org/10.4028/www.scientific.net/AMR.1089.253.
Gao, W. T., F. S. Liu, M. Wei, F. Zhu, and Q. Qi. 2016. “Study on new antifreeze vegetation concrete mix ratio and performance.” [In Chinese.] New Build. Mater. 43 (11): 33–89. https://doi.org/10.3969/j.issn.1001-702X.2016.11.009.
Guneyisi, E., M. Gesoglu, Q. Kareem, and S. Ipek. 2016. “Effect of different substitution of natural aggregate by recycled aggregate on performance characteristics.” Mater. Struct. 49 (1–2): 521–536. https://doi.org/10.1617/s11527-014-0517-y.
Hariyadi, H., and H. Tamai. 2015. “Enhancing the performance of porous concrete by utilizing the pumice aggregate.” Procedia Eng. 2015 (125): 732–738. https://doi.org/10.1016/j.proeng.2015.11.116.
Ibrahim, A., E. Mahmoud, M. Yamin, and V. C. Patibandla. 2013. “Experimental study on portland cement pervious concrete mechanical and hydrological properties.” Constr. Build. Mater. 50 (Jan): 524–529. https://doi.org/10.1016/j.conbuildmat.2013.09.022.
Kevern, J. T., V. R. Schaefer, K. Wang, and M. T. Suleiman. 2008. “Pervious concrete mixture proportions for improved free-thaw durability.” J. ASTM Int. 5 (2): 1–12. https://doi.org/10.1520/JAI101320.
Kia, A., H. S. Wong, and C. R. Cheeseman. 2017. “Clogging in permeable concrete: A review.” J. Environ. Manage. 193 (May): 221–233. https://doi.org/10.1016/j.jenvman.2017.02.018.
Kim, Y. J., A. Gaddafi, and I. Yoshitake. 2016. “Permeable concrete mixed with various admixtures.” Mater. Des. 100 (Jun): 110–119. https://doi.org/10.1016/j.matdes.2016.03.109.
Kuang, X., J. Sansalone, G. Ying, and V. Ranieri. 2011. “Pore-structure models of hydraulic conductivity for permeable pavement.” J. Hydrol. 399 (3–4): 148–157. https://doi.org/10.1016/j.jhydrol.2010.11.024.
Lang, L., H. Duan, and B. Chen. 2019. “Properties of pervious concrete made from steel slag and magnesium phosphate cement.” Constr. Build. Mater. 209 (Jun): 95–104. https://doi.org/10.1016/j.conbuildmat.2019.03.123.
Liu, F., Z. You, X. Yang, and H. Wang. 2018a. “Macro-micro degradation process of fly ash concrete under alternation of freeze-thaw cycles subjected to sulfate and carbonation.” Constr. Build. Mater. 181 (Aug): 369–380. https://doi.org/10.1016/j.conbuildmat.2018.06.037.
Liu, H., G. Luo, Y. Gong, and H. Wei. 2018b. “Mechanical properties, permeability, and freeze–thaw resistance of pervious concrete modified by waste crumb rubbers.” Appl. Sci. 8 (10): 1843. https://doi.org/10.3390/app8101843.
Liu, X., W. X. Lin, and J. X. Li. 2017. “Durability performance research on permeable concrete with rigid polypropylene fiber.” [In Chinese.] Concrete 2017 (1): 133–136. https://doi.org/10.3969/j.issn.1002-3550.2017.01.033.
Mahboub, K. C., J. Canler, R. Rathbone, T. Robl, and B. Davis. 2009. “Pervious concrete: Compaction and aggregate gradation.” ACI Mater. J. 106 (6): 523–528. https://doi.org/10.1002/tal.508.
Martin, W. D., N. B. Kaye, and B. J. Putman. 2014. “Impact of vertical porosity distribution on the permeability of pervious concrete.” Constr. Build. Mater. 59 (May): 78–84. https://doi.org/10.1016/j.conbuildmat.2014.02.034.
Modeste, K. G., L. C. Falls, and P. Y. Park. 2015. “Performance of permeable pavements under low volume traffic loads.” In Proc., 94th Annual Meeting of the Transportation Research Board. Washington, DC: Transportation Research Board.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2002. Standard for test method of mechanical properties on ordinary concrete. GB/T 50081-2002. Beijing: MOHURD.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2009a. Standard for test method of long-term performance and durability of ordinary concrete. GB/T 50082-2009. Beijing: MOHURD.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2009b. Technical specifications for pervious concrete pavement. CJJ/T 135-2009. Beijing: MOHURD.
Muthaiyan, U. M., and S. Thirumalai. 2017. “Influence of fly ash and fine aggregates on the characteristics of pervious concrete.” Int. J. Appl. Eng. Res. 12 (8): 1598–1609.
Neithalath, N., M. S. Sumanasooriya, and O. Deo. 2010. “Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction.” Mater. Charact. 61 (8): 802–813. https://doi.org/10.1016/j.matchar.2010.05.004.
Neptune, A. I., and B. J. Putman. 2010. “Effect of aggregate size and gradation on pervious concrete mixtures.” ACI Mater. J. 107 (6): 625–631. https://doi.org/10.1080/10789669.2010.10390937.
Nguyen, D. H., M. Boutouil, N. Sebaibi, F. Baraud, and L. Leleyter. 2017. “Durability of pervious concrete using crushed seashells.” Constr. Build. Mater. 135 (Mar): 137–150. https://doi.org/10.1016/j.conbuildmat.2016.12.219.
Rehder, B., K. Banh, and N. Neithalath. 2014. “Fracture behavior of pervious concretes: The effects of pore structure and fibers.” Eng. Fract. Mech. 118 (Mar): 1–16. https://doi.org/10.1016/j.engfracmech.2014.01.015.
Ridhaa, M. M. S., N. T. H. Al-Shafi’i, and M. M. Hasan. 2017. “Ultra-high performance steel fibers concrete corbels: Experimental investigation.” Case Stud. Const. Mater. 7 (Dec): 180–190. https://doi.org/10.1016/j.cscm.2017.07.004.
SAC (Standardization Administration of the People’s Republic of China). 2007. Common portland cement. GB 175-2007. Beijing: SAC.
Said, S. H., and H. A. Razak. 2015. “The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite.” Mater. Des. 86 (Dec): 447–457. https://doi.org/10.1016/j.matdes.2015.07.125.
Sarwono, D., R. Djumari, and A. Setyawan. 2017. “The application of porous concrete filled with soil and sands for low volume traffic road.” Procedia Eng. 171: 1429–1434. https://doi.org/10.1016/j.proeng.2017.01.462.
Sumanasooriya, M. S., D. P. Bentz, and N. Neithalath. 2010. “Planar image-based reconstruction of pervious concrete pore structure and permeability prediction.” ACI Mater. J. 107 (4): 413–421. https://doi.org/10.1002/tal.511.
Sumanasooriya, M. S., and N. Neithalath. 2009. “Stereology-and morphology-based pore structure descriptors of enhanced porosity (pervious) concretes.” ACI Mater. J. 106 (5): 429–438. https://doi.org/10.1016/j.cemconcomp.2009.06.007.
Sumanasooriya, M. S., and N. Neithalath. 2011. “Pore structure features of pervious concretes proportioned for desired porosities and their performance prediction.” Cem. Concr. Compos. 33 (8): 778–787. https://doi.org/10.1016/j.cemconcomp.2011.06.002.
Wu, H., Z. Liu, B. Sun, and J. Yin. 2016. “Experimental investigation on freeze–thaw durability of portland cement pervious concrete (PCPC).” Constr. Build. Mater. 117 (Aug): 63–71. https://doi.org/10.1016/j.conbuildmat.2016.04.130.
Xu, G. L., W. G. Shen, X. J. Huo, Z. F. Yang, J. Wang, W. S. Zhang, and X. L. Ji. 2018. “Investigation on the properties of porous concrete as road base material.” Constr. Build. Mater. 158 (Jan): 141–148. https://doi.org/10.1016/j.conbuildmat.2017.09.151.
Yang, J., and G. Jiang. 2003. “Experimental study on properties of pervious concrete pavement materials.” Cem. Concr. Res. 33 (3): 381–386. https://doi.org/10.1016/S0008-8846(02)00966-3.
Yang, Z. 2011. “Freezing-and thawing durability of pervious concrete under simulated field conditions.” ACI Mater. J. 108 (2): 187–195. https://doi.org/10.1016/j.tsf.2011.01.263.
Yao, A., H. Ding, X. Zhang, Z. Hu, R. Hao, and T. Yang. 2018. “Optimum design and performance of porous concrete for heavy-load traffic pavement in cold and heavy rainfall region of NE China.” Adv. Mater. Sci. Eng. 2018: 1–15. https://doi.org/10.1155/2018/7082897.
Yu, F., D. Q. Sun, M. J. Hu, and J. Wang. 2019. “Study on the pores characteristics and permeability simulation of pervious concrete based on 2D/3D CT images.” Constr. Build. Mater. 200 (Mar): 687–702. https://doi.org/10.1016/j.conbuildmat.2018.12.135.
Zhang, J., G. D. Ma, R. P. Ming, X. Z. Cui, L. Li, and H. N. Xu. 2018. “Numerical study on seepage flow in pervious concrete based on 3D CT imaging.” Constr. Build. Mater. 161 (Feb): 468–478. https://doi.org/10.1016/j.conbuildmat.2017.11.149.
Zheng, M., S. Chen, and B. Wang. 2006. “Mixture ratio design method of porous concrete based on orthogonality test.” J. Tongji Univ. 34 (10): 1319–1323. https://doi.org/10.1016/S1872-2040(06)60039-X.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 30, 2019
Accepted: Jul 29, 2020
Published online: Mar 5, 2021
Published in print: May 1, 2021
Discussion open until: Aug 5, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.