Prediction of Compressive Strength of Concrete Using Double-Shear Testing Method
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 1
Abstract
This study presents a partially nondestructive testing (PDT) method, the innovative double-shear test method (DSTM), to improve the accuracy of concrete strength tests in situ and reduce structural damage. This method involves double-shear faces of the concrete core, on which the load is exerted by a specified DSTM apparatus to produce approximately pure shear stress and obtain the shear strength of the concrete core. The DSTM test indicated that some factors (core-drilling direction, specimen diameter, core length, aggregate type, and concrete moisture) do not influence concrete strength, and a strong relationship between DSTM strength and cube compressive strength ranging from 20 to 40 MPa is proposed for testing concrete samples. The reliability and repeatability of the DSTM are greater than those of other in situ test techniques, such as the Schmidt rebound hammer (SRH) and pull-off test method. Features of the visible failure mode of concrete samples certify the correctness of the test results. Test results demonstrated that the DSTM is applicable to in situ tests of concrete compressive strength with much higher accuracy than the core-drilling method, and causes less damage to structures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request, such as the experimental data of the DSTM tests and in situ verification of the DSTM.
Acknowledgments
This study is supported by the Opening Foundation of the Shandong Key Laboratory of Civil Engineering Disaster Prevention and Mitigation (Grant No. CDPM2019KF10); the National Natural Science Foundation of China (Grant No. 51908341); the Opening Foundation of the Key Laboratory of Concrete and Prestressed Concrete Structure, Ministry of Education, Southeast University (Grant No. CPCSME2019-06); and the Research Project of Changzhou Institute of Technology (Grant Nos. E3-6701-18-064 and YN18044).
References
Amir, A. M., and B. Nemkumar. 2002. “Shear strength of steel fiber-reinforced concrete.” ACI Mater. J. 99 (48): 473–479.
ASTM. 2008. Standard test method for rebound number of hardened concrete. ASTM C805/C805M-08. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard specification for concrete aggregates. ASTM C33/C33M-18. West Conshohocken, PA: ASTM.
Bartlett, F. M., and J. G. MacGregor. 1994. “Effect of moisture condition on concrete core strengths.” ACI Mater. J. 91 (3): 227–236.
BSI (British Standards Institution). 1992. Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests. BS 1881-207. London: BSI.
BSI (British Standards Institution). 2009. Testing hardened concrete: Compressive strength of test specimens. BS EN 12390-3. London: BSI.
Dahl-Jorgensen, E., and R. Johansen. 1984. General and specialized use of the break-off concrete strength testing method. Detroit, MI: American Concrete Institute.
Diakhaté, M., A. Millien, and C. Petit. 2011. “Experimental investigation of tack coat fatigue performance: Towards an improved lifetime assessment of pavement structure interfaces.” Constr. Build. Mater. 25 (2): 1123–1133. https://doi.org/10.1016/j.conbuildmat.2010.06.064.
Iosipescu, N. 1969. “A new method for determining the pure shearing strength of concrete.” Concrete 3 (2): 63.
JSCE (Japan Society of Civil Engineers). 1990. Method of test for shear strength of steel fiber reinforced concrete (SFRC). JSCE-SF6. Tokyo: JSCE.
Long, A. E., and A. M. Murray. 1984. The pull-off partially destructive test for concrete. Detroit, MI: American Concrete Institute.
Malek, N. J. A., R. Hassan, and E. M. Ali. 2016. “Double shear test behaviour of balau species for different end distance.” Jurnal Teknologi 78 (5–4): 89–93.
Malhotra, V. M., and N. J. Carino. 1991. Handbook on nondestructive testing of concrete, 343. Boca Raton, FL: CRC Press.
Mattock, A. H. 1972. “Shear transfer in reinforced concrete—Recent research.” PCI J. 17 (2): 55–75. https://doi.org/10.15554/pcij.03011972.55.75.
Neville, A. M. 2001. “Core tests: Easy to perform, not easy to interpret.” Concr. Int. 23 (11): 59–68.
Richardson, D. N. 1989. “Point load test for estimation of concrete compressive strength.” ACI Struct. J. 86 (4): 409–416.
Seljuk, L., H. S. Goekce, and K. Kayabali. 2012. “A nondestructive testing technique: Nail penetration test.” ACI Struct. J. 109 (2): 245–252.
Stone, W. C., N. J. Carino, and C. P. Reeve. 1986. “Statistical-methods for in-place strength predictions by the pull-out test.” ACI Mater. J. 83 (5): 745–756.
Thomas, R., S. Bhavna, H. Kent, and R. Michael. 2016. “Dowelled structural connections in laminated bamboo and timber.” Composites, Part B 90 (Apr): 232–240.
Tuncan, M., O. Arioz, and K. Ramyar. 2008. “Assessing concrete strength by means of small diameter cores.” Constr. Build. Mater. 22 (5): 981–988. https://doi.org/10.1016/j.conbuildmat.2006.11.020.
Van Vliet, M. R. A., and J. G. M. Van Mier. 1999. “Effect of strain gradients on the size effect of concrete in uniaxial tension.” Int. J. Fract. 95 (1–4): 195–219. https://doi.org/10.1023/A:1018652302261.
Wolinski, S., D. A. Hordijk, and H. W. Reinhardt. 1987. “Influence of aggregate size on fracture mechanics parameters of concrete.” Int. J. Cem. Compos. Lightweight Concrete 9 (2): 95–103. https://doi.org/10.1016/0262-5075(87)90025-X.
Zhang, Q., and Z. H. Guo. 1992. “Study on shear strength and shear deformation of concrete.” [In Chinese.] J. Build. Struct. 13 (5): 17–24. https://doi.org/10.14006/j.jzjgxb.1992.05.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Feb 7, 2020
Accepted: Jun 19, 2020
Published online: Oct 26, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 26, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.