Effect of High-Speed Shear Preparation Conditions on Asphalt Aging and Prevention of Asphalt Aging
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 11
Abstract
In this research, to study the effect of a high-speed shearing method on asphalt aging, based on SK-70# matrix asphalt, the influences of the shear time, shear rate, shear temperature, shear ring, and air on asphalt aging were investigated by using penetration, a 5°C force ductility value, and a softening point as indexes and a high-shear emulsifier as the shear preparation instrument. The results show that oxygen aging in air is the main factor causing asphalt aging during high-speed shearing in laboratory experiments. A device that prevents asphalt from aging during high-speed shearing was invented. The device and method can effectively eliminate the contact between asphalt and oxygen in the preparation of asphalt and remove the heat generated inside the asphalt. A nitrogen layer is formed on top of the asphalt sample, which can prevent oxidation and reduce the temperature of asphalt to solve the asphalt aging problem in high-speed shear preparation. Subsequently, styrene-butadiene-styrene triblock copolymer (SBS)-modified asphalt was used to carry out relevant tests to verify the equipment and method, which proved the reliability of its preventive effect. This study has important reference significance for reducing the influence of thermal oxidation aging and accurately evaluating the properties of modifiers in the preparation of modified asphalt by a high-speed shear machine, providing important technological measures for the preparation of modified asphalt in the future.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research was funded by the National Natural Science Foundation of China (No. 51778096) and the Natural Science Foundation Project of CQ CSTC (No. cstc2016jcyjA0119). The authors would like to gratefully acknowledge financial support from the National Natural Science Foundation of China and the Natural Science Foundation Project of CQ CSTC. Junxi He and Gang Huang contributed equally to this work, and Junxi He and Gang Huang are cofirst authors.
References
Bao, D., Y. Yu, and Q. Zhao. 2019. “Evaluation of the chemical composition and rheological properties of bio-asphalt from different biomass sources of paper.” Road Mater. Pavement Des. 1: 1–15. https://doi.org/10.1080/14680629.2019.1568287.
Dong, F., X. Yu, X. Liang, G. Ding, and J. Wei. 2017. “Influence of foaming water and aging process on the properties of foamed asphalt of paper.” Constr. Build. Mater. 153 (Oct): 866–874. https://doi.org/10.1016/j.conbuildmat.2017.07.161.
Dong, F., W. Zhao, Y. Zhang, J. Wei, W. Fan, Y. Yu, and Z. Wang. 2014. “Influence of SBS and asphalt on SBS dispersion and the performance of modified asphalt of paper.” Constr. Build. Mater. 62 (Jul): 1–7. https://doi.org/10.1016/j.conbuildmat.2014.03.018.
Fang, C., C. Wu, R. Yu, Z. Zhang, M. Zhang, and S. Zhou. 2013 “Aging properties and mechanism of the modified asphalt by packaging waste polyethylene and waste rubber powder of paper.” Polym. Adv. Technol. 24 (1): 51–55. https://doi.org/10.1002/pat.3048.
Hadiwardoyo, S. P., E. S. Sinaga, and H. Fikri. 2013. “The influence of Buton asphalt additive on skid resistance based on penetration index and temperature of paper.” Constr. Build. Mater. 42 (May): 5–10. https://doi.org/10.1016/j.conbuildmat.2012.12.018.
Huang, G., Z. Y. He, C. Hu, and T. Huang. 2010. “Performance evaluation of rock modified asphalt based on analysis of microstructure and rheological property.” J. Southeast Univ. 40 (2): 367–372. https://doi.org/10.3969/j.issn.1001-0505.2010.02.029.
Iwański, M., M. Cholewińska, and G. Mazurek. 2017. “Viscoelastic properties of polymer modified bitumen in warm mix asphalt technology in terms of ageing of paper.” Procedia Eng. 172: 401–408. https://doi.org/10.1016/j.proeng.2017.02.007.
Jahanbakhsh, H., M. M. Karimi, F. M. Nejad, and B. Jahangiri. 2016. “Viscoelastic-based approach to evaluate low temperature performance of asphalt binders of paper.” Constr. Build. Mater. 128 (Dec): 384–398. https://doi.org/10.1016/j.conbuildmat.2016.10.073.
Lei, Y., H. Wang, X. Chen, X. Yang, Z. You, S. Dong, and J. Gao. 2018. “Shear property, high-temperature rheological performance and low-temperature flexibility of asphalt mastics modified with bio-oil of paper.” Constr. Build. Mater. 174 (Jun): 30–37. https://doi.org/10.1016/j.conbuildmat.2018.04.094.
Li, P., Z. Ding, L. X. Ma, and Z. G. Feng. 2016. “Analysis of viscous flow properties of asphalt in aging process of paper.” Constr. Build. Mater. 124 (Oct): 631–638. https://doi.org/10.1016/j.conbuildmat.2016.06.136.
Liu, F., Z. Zhou, and Y. Wang. 2019. “Predict the rheological properties of aged asphalt binders using a universal kinetic model of paper.” Constr. Build. Mater. 195 (Jan): 283–291. https://doi.org/10.1016/j.conbuildmat.2018.11.025.
Ministry of Communications of the People’s Republic of China. 2011. Standard test methods of asphalt and asphalt mixtures for highway engineering. JTG E20-2011. Beijing: Ministry of Communications of the People’s Republic of China.
Sengul, C. E., S. Oruc, E. Iskender, and A. Aksoy. 2013. “Evaluation of SBS modified stone mastic asphalt pavement performance of paper.” Constr. Build. Mater. 41 (Apr): 777–783. https://doi.org/10.1016/j.conbuildmat.2012.12.065.
Shadmani, A., B. Tahmouresi, A. Saradar, and E. Mohseni. 2018. “Durability and microstructure properties of SBR-modified concrete containing recycled asphalt pavement of paper.” Constr. Build. Mater. 185 (Oct): 380–390. https://doi.org/10.1016/j.conbuildmat.2018.07.080.
Tabatabaee, H. A., C. Clopotel, A. Arshadi, and H. Bahia. 2013. “Critical problems with using the asphalt ductility test as a performance index for modified binders.” Transp. Res. Rec. 2370 (1): 84–91. https://doi.org/10.3141/2370-11.
Wang, R., H. Fan, W. Jiang, G. Ni, and S. Qu. 2019. “Amino-functionalized graphene quantum dots prepared using high-softening point asphalt and their application in detection of paper.” Appl. Surf. Sci. 467–468 (Feb): 446–455. https://doi.org/10.1016/j.apsusc.2018.10.104.
Wang, Y., L. Sun, and Y. Qin. 2015. “Aging mechanism of SBS modified asphalt based on chemical reaction kinetics of paper.” Constr. Build. Mater. 91 (Aug): 47–56. https://doi.org/10.1016/j.conbuildmat.2015.05.014.
Xiang, L., J. Cheng, and S. Kang. 2015. “Thermal oxidative aging mechanism of crumb rubber/SBS composite modified asphalt of paper.” Constr. Build. Mater. 75 (Jan): 169–175. https://doi.org/10.1016/j.conbuildmat.2014.08.035.
Xu, G., and H. Wang. 2017. “Molecular dynamics study of oxidative aging effect on asphalt binder properties of paper.” Fuel 188 (Jan): 1–10. https://doi.org/10.1016/j.fuel.2016.10.021.
Zhang, F., J. Yu, and S. Wu. 2010. “Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts of paper.” J. Hazard. Mater. 182 (1–3): 507–517. https://doi.org/10.1016/j.jhazmat.2010.06.061.
Zhang, J., J. Wang, Y. Wu, W. Sun, and Y. Wang. 2009. “Investigation on thermo-rheological properties and stability of SBR modified asphalts containing palygorskite clay of paper.” J. Appl. Polym. Sci. 113 (4): 2524–2535. https://doi.org/10.1002/app.30223.
Zhang, R., H. Wang, J. Gao, Z. You, and X. Yang. 2017. “High temperature performance of SBS modified bio-asphalt of paper.” Constr. Build. Mater. 144 (Jul): 99–105. https://doi.org/10.1016/j.conbuildmat.2017.03.103.
Zhu, C., H. Zhang, G. Xu, and C. Shi. 2017. “Aging rheological characteristics of SBR modified asphalt with multi-dimensional nanomaterials of paper.” Constr. Build. Mater. 151 (Oct): 388–393. https://doi.org/10.1016/j.conbuildmat.2017.06.121.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Sep 5, 2019
Accepted: May 12, 2020
Published online: Aug 24, 2020
Published in print: Nov 1, 2020
Discussion open until: Jan 24, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.