Dynamic Compressive Behavior of 10-Year-Old Concrete Cores after Exposure to High Temperatures
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 5
Abstract
In fires, concrete structures sometimes suffer blasting loads. This paper investigated the effect of high temperature on the dynamic mechanical properties of concrete. The specimens were cored from 10-year-old concrete beams and exposed to room temperature (20°C), 200°C, 400°C, and 600°C. The split Hopkinson pressure bar (SHPB) was used to study the dynamic mechanical behavior. The results showed that the dynamic compressive stress–strain curve of concrete after exposure to high temperature can be divided into three stages: elastic growth, slow decline, and rapid decline. Furthermore, at the same temperature, as the strain rate increased, the dynamic strength increased. When the strain rate was constant, high temperature resulted in low dynamic strength. A dynamic constitutive model is proposed. The calculation results were in good agreement with the experimental data. Therefore, this model can provide a theoretical basis for the simulation of the dynamic mechanical behavior of concrete after exposure to high temperature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research is based upon work supported by the National Natural Science Foundation of China (Grant Nos. 51779134 and 51579142) and the Young Elite Scientists Sponsorship Program by CAST (Grant No. 2017QNRC001).
References
Aslani, F., and B. Samali. 2014. “High strength polypropylene fibre reinforcement concrete at high temperature.” Fire Technol. 50 (5): 1229–1247. https://doi.org/10.1007/s10694-013-0332-y.
Bischoff, P. H., and S. H. Perry. 1991. “Compressive behaviour of concrete at high strain rates.” Mater. Struct. 24 (6): 425–450. https://doi.org/10.1007/BF02472016.
Cao, S., E. Yilmaz, W. Song, E. Yilmaz, and C. Xue. 2019. “Loading rate effect on uniaxial compressive strength behavior and acoustic emission properties of cemented tailings backfill.” Constr. Build. Mater. 213 (Jul): 313–324. https://doi.org/10.1016/j.conbuildmat.2019.04.082.
Chan, Y. N., G. F. Peng, and M. Anson. 1999. “Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures.” Cem. Concr. Compos. 21 (1): 23–27. https://doi.org/10.1016/S0958-9465(98)00034-1.
Chen, X., C. Chen, Z. Liu, J. Lu, and X. Fan. 2018. “Compressive behavior of concrete under high strain rates after freeze-thaw cycles.” Comput. Concr. 21 (2): 209–217. https://doi.org/10.12989/cac.2018.21.2.209.
Chen, X., S. Wu, and J. Zhou. 2014. “Experimental study on dynamic tensile strength of cement mortar using split Hopkinson pressure bar technique.” J. Mater. Civ. Eng. 26 (6): 04014005. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000926.
Ehm, C., and U. Schneider. 1985. “The high temperature behaviour of concrete under biaxial conditions.” Cem. Concr. Res. 15 (1): 27–34. https://doi.org/10.1016/0008-8846(85)90005-5.
Erzar, B., P. Forquin, C. Pontiroli, and E. Buzaud. 2010. “Influence of aggregate size and free water on the dynamic behaviour of concrete subjected to impact loading.” In Vol. 6 of Proc., 14th Int. Conf. on Experimental Mechanics (ICEM’14), 1221. Paris: EDP Science.
Feng, Z. Z., X. J. Wang, F. S. Wang, H. S. Gao, and Z. F. Yue. 2007. “Implementation and its application in finite element analysis of constitutive model for ZWT nonlinear viscoelastic material.” [In Chinese.] J. Mater. Sci. Eng. 25 (2): 269–272.
He, Z. J., and Y. P. Song. 2010. “Multiaxial tensile–compressive strengths and failure criterion of plain high-performance concrete before and after high temperatures.” Constr. Build. Mater. 24 (4): 498–504. https://doi.org/10.1016/j.conbuildmat.2009.10.012.
Huo, J. S., Y. M. He, L. P. Xiao, and B. S. Chen. 2013. “Experimental study on dynamic behaviours of concrete after exposure to high temperatures up to 700°C.” Mater. Struct. 46 (1–2): 255–265. https://doi.org/10.1617/s11527-012-9899-x.
Ibrahim, R. K., R. Hamid, and M. R. Taha. 2012. “Fire resistance of high-volume fly ash mortars with nanosilica addition.” Constr. Build. Mater. 36 (4): 779–786. https://doi.org/10.1016/j.conbuildmat.2012.05.028.
Johnson, G. R., and W. H. Cook. 1983. “A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures.” In Vol. 21 of Proc., 7th Int. Symp. on Ballistics, 541–547. The Hague, Netherlands: International Ballistics Committee.
Kai, M. F., Y. Xiao, X. L. Shuai, and G. Ye. 2017. “Compressive behavior of engineered cementitious composites under high strain-rate loading.” J. Mater. Civ. Eng. 29 (4): 04016254. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001781.
Kodur, V., and R. McGrath. 2003. “Fire endurance of high strength concrete columns.” Fire Technol. 39 (1): 73–87. https://doi.org/10.1023/A:1021731327822.
Komonen, J., and V. Penttala. 2003. “Effects of high temperature on the pore structure and strength of plain and polypropylene fiber reinforced cement pastes.” Fire Technol. 39 (1): 23–34. https://doi.org/10.1023/A:1021723126005.
Li, Q. H., X. Zhao, S. L. Xu, and K. Y. L. Christopher. 2019. “Multiple impact resistance of hybrid fiber ultrahigh toughness cementitious composites with different degrees of initial damage.” J. Mater. Civ. Eng. 31 (2): 04018368. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002576.
Li, W., and J. Xu. 2009. “Impact characterization of basalt fiber reinforced geopolymeric concrete using a 100-mm-diameter split Hopkinson pressure bar.” Mater. Sci. Eng., A. 513–514 (Jul): 145–153. https://doi.org/10.1016/j.msea.2009.02.033.
Long, T. P., and N. J. Carino. 1998. “Review of mechanical properties of HSC at elevated temperature.” J. Mater. Civ. Eng. 10 (1): 58–65. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(58).
Ma, Q., R. Guo, Z. Zhao, Z. Lin, and K. He. 2015. “Mechanical properties of concrete at high temperature—A review.” Constr. Build. Mater. 93 (Sep): 371–383. https://doi.org/10.1016/j.conbuildmat.2015.05.131.
Mukai, T., H. Kanahashi, T. Miyoshi, M. Mabuchi, and T. G. Nieh. 1999. “Experimental study of energy absorption in a close-celled aluminum foam under dynamic loading.” Scr. Mater. 40 (8): 921–927. https://doi.org/10.1016/S1359-6462(99)00038-X.
Papayianni, J., and T. Valiasis. 1991. “Residual mechanical properties of heated concrete incorporating different pozzolanic materials.” Mater. Struct. 24 (2): 115–121. https://doi.org/10.1007/BF02472472.
Peng, G. F., and Z. S. Huang. 2008. “Change in microstructure of hardened cement paste subjected to elevated temperatures.” Constr. Build. Mater. 22 (4): 593–599. https://doi.org/10.1016/j.conbuildmat.2006.11.002.
Poon, C. S., Z. H. Shui, and L. Lam. 2004. “Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures.” Cem. Concr. Res. 34 (12): 2215–2222. https://doi.org/10.1016/j.cemconres.2004.02.011.
Qiao, Y., H. Wang, L. Cai, W. Zhang, and B. Yang. 2016. “Influence of low temperature on dynamic behavior of concrete.” Constr. Build. Mater. 115 (Jul): 214–220. https://doi.org/10.1016/j.conbuildmat.2016.04.046.
Shah, V. N., and C. J. Hookham. 1998. “Long-term aging of light water reactor concrete containments.” Nucl. Eng. Des. 185 (1): 51–81. https://doi.org/10.1016/S0029-5493(98)00187-3.
Soroushian, P., S. Marikunte, and J. P. Won. 1994. “Wood fiber reinforced cement composites under wetting-drying and freezing-thawing cycles.” J. Mater. Civ. Eng. 6 (4): 595–611. https://doi.org/10.1061/(ASCE)0899-1561(1994)6:4(595).
Wang, Z., N. Tian, J. Wang, J. Liu, and H. Li. 2018. “Experimental study on damage mechanical characteristics of heat-treated granite under repeated impact.” J. Mater. Civ. Eng. 30 (11): 04018274. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002465.
Xie, Q., Z. Zhu, and G. Kang. 2014. “Dynamic stress–strain behavior of frozen soil: Experiments and modeling.” Cold Reg. Sci. Technol. 106 (Oct–Nov): 153–160. https://doi.org/10.1016/j.coldregions.2014.07.004.
Xu, M., and K. Wille. 2016. “Numerical investigation of the effects of pulse shaper, lateral inertia, and friction on the calculated strain-rate sensitivity of UHP-FRC using a split Hopkinson pressure bar.” J. Mater. Civ. Eng. 28 (11): 04016114. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001580.
Yang, L. M., F. H. Zhou, and L. L. Wang. 2011. Foundations of stress waves, 519–528. Amsterdam, Netherlands: Elsevier.
Yoon, Y. S., J. P. Won, S. K. Woo, and Y. C. And Song. 2002. “Enhanced durability performance of fly ash concrete for concrete-faced rockfill dam application.” Cem. Concr. Res. 32 (1): 23–30. https://doi.org/10.1016/S0008-8846(01)00623-8.
Yu, K. Q., J. T. Yu, Z. D. Lu, and Q. Y. Chen. 2016. “Fracture properties of high-strength/high-performance concrete (HSC/HPC) exposed to high temperature.” Mater. Struct. 49 (11): 4517–4532. https://doi.org/10.1617/s11527-016-0804-x.
Zhang, Y., W. Sun, S. Liu, C. Jiao, and J. Lai. 2008. “Preparation of C200 green reactive powder concrete and its static–dynamic behaviors.” Cem. Concr. Compos. 30 (9): 831–838. https://doi.org/10.1016/j.cemconcomp.2008.06.008.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Mar 28, 2019
Accepted: Oct 16, 2019
Published online: Feb 22, 2020
Published in print: May 1, 2020
Discussion open until: Jul 22, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.