Impact of Asphalt Mixture Specification Limits: A Theoretical Analysis
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 5
Abstract
Specifications limits and tolerances are crucial in the relationships among contractor, road agency, and citizens because they influence profits, acceptance procedures, and pavement durability. They mainly depend on processes involved, and, unfortunately, their relationship with durability is mainly empirical and calls for further investigation. In the light of these issues, the study described in this paper deals with assessing how durability and pay adjustment (PA) are affected by variations in the main explanatory variables [e.g., air-void content (AV)] within specification limits. A model was set up in order to assess the impact on the modulus of a bituminous mixture, which is a crucial factor for the expected life (EXL). The model was applied to a well-known set of contract specifications in order to check for their suitability and rationale. Results demonstrate that usually, air void–related consequences are worse than penetration-related consequences, which, in turn, outrank aggregate gradation–related and asphalt content–related consequences. An exception is the maximum size of aggregates. Furthermore, when pay adjustments build on empirical algorithms, they have to be layer-specific because the same error implies more severe consequences in deeper layers. Results can benefit both researchers and practitioners.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statements
Data generated or analyzed during the study are available from the corresponding author by request.
References
Al-Khateeb, G., A. Shenoy, N. Gibson, and T. Harman. 2006. “A new simplistic model for dynamic modulus predictions of asphalt paving mixtures.” In Proc., Annual Meeting of Association of Asphalt Paving Technologists. Lino Lakes, MN: Association of Asphalt Paving Technologists.
ANAS (Azienda Nazionale Autonoma delle Strade). 2000. Capitolato Speciale di Appalto—Parte 2ª Norme tecniche—Pavimentazioni stradali/autostradali. Rome: ANAS Contract Specification.
Andrei, D., M. W. Witczak, and M. W. Mirza. 1999. Development of revised predictive model for the dynamic(complex) modulus of asphalt mixtures. College Park, MD: Univ. of Maryland.
Arifin, S., M. Selintung, and L. Samang. 2015. “Effect of effective specific gravity on VMA of asphalt concrete (case study of Lolioge materials of Palu City).” Int. J. Eng. Technol. 5 (4): 212–224.
Asphalt Institute. 1982. Research and development of the Asphalt Institute’s thickness design manual (MS-1).. Lexington, KY: Asphalt Institute.
Boussinesq, J. 1885. Application des potentiels a l’etude de l’equilibre et due mouvement des solids elastiques. Paris: Gauthiers-Villars.
Bucchi, A., C. Costa, and V. Vignali. 2009. Studi preliminari per la costruzione della terza corsia. Milan, Italy: Edi-Cem Srl.
Business, Transportation and Housing Agency. 2010. Method of test for optimum binder content (OBC) for HMA type A, B, C, and RHMA-G. California Test Number. Sacramento, CA: State of California Business, Transportation and Housing Agency.
Cho, Y. H., D. W. Park, and S. D. Hwang. 2010. “A predictive equation for dynamic modulus of asphalt mixtures used in Korea.” Constr. Build. Mater. 24 (4): 513–519. https://doi.org/10.1016/j.conbuildmat.2009.10.008.
Christensen, D. W., and R. Bonaquist. 2015. “Improved Hirsch model for estimating the modulus of hot-mix asphalt.” Supplement, Road Mater. Pavement Design 16 (S2): 254–274. https://doi.org/10.1080/14680629.2015.1077635.
Christie R. S., and R. S. Burns. 2003. Bituminous concrete mixtures, design procedures, and specifications for special bituminous mixtures. Harrisburg, PA: Pennsylvania Dept. of Transportation.
Clyne, T. R., X. Li, M. O. Marasteanu, and E. L. Skok. 2003. Dynamic and resilient modulus on Mn/dot asphalt mixtures. Minneapolis: Univ. of Minnesota.
Colonna, P., N. Berloco, V. Ranieri, and S. T. Shuler. 2012. “Application of bottom ash for pavement binder course.” Procedia Social Behav. Sci. 53 (Oct): 962–972. https://doi.org/10.1016/j.sbspro.2012.09.945.
Cross, S. A., Y. Jakatimath, and K. C. Sumesh. 2007. Determination of dynamic modulus master curves for Oklahoma HMA mixtures. Stillwater, OK: Oklahoma State Univ. Civil and Environmental Engineering.
Esfandiarpour, S., and A. Shalaby. 2017. “Alternatives for calibration of dynamic modulus prediction models of asphalt concrete containing RAP.” Int. J. Pavement Res. Technol. 10 (3): 203–218. https://doi.org/10.1016/j.ijprt.2016.11.005.
Garcia, G., and M. Thompson. 2007. HMA dynamic modulus—Temperature relations. Champaign, IL: University of Illinois, Urbana-Champaign.
Gaspard, K. J. 2000. Evaluation of cement treated base courses. Baton Rouge, LA: Louisiana Transportation Research Center.
Georgouli, K., A. Loizos, and C. Plati. 2016. “Calibration of dynamic modulus predictive model.” Constr. Build. Mater. 102 (Jan): 65–75. https://doi.org/10.1016/j.conbuildmat.2015.10.163.
Ghadimi, B., H. Nikraz, C. Leek, and A. Nega. 2013. “A comparison between austroads pavement structural design and AASHTO design in flexible pavement.” In Vol. 723 of Advanced materials research, 3–11. Baech, Switzerland: Trans Tech.
Giannattasio, P., C. Caliendo, L. Esposito, B. Festa, and W. Pellecchia. 1989. Portanza dei sottofondi. Napoli, Italy: Fondazione Politecnica per il Mezzogiorno d’Italia.
Giuliana, G., V. Nicolosi, and B. Festa. 2012. “Predictive formulas of complex modulus for high air void content mixes.” In Proc., Transportation Research Board 91st Annual Meeting. Washington, DC: Transportation Research Board.
Hanifa, K., M. Y. Abu-Farsakh, and G. P. Gautreau. 2015. Design values of resilient modulus for stabilized and non-stabilized base. Baton Rouge, LA: Louisiana Dept. of Transportation and Development.
Hossain, N. E. I., D. Singh, and M. Zaman. 2013. “Dynamic modulus-based field rut prediction model from an instrumented pavement section.” Procedia Social Behav. Sci. 104 (Dec): 129–138. https://doi.org/10.1016/j.sbspro.2013.11.105.
Houben, L. J. M. 2009. Structural design of pavements, Part IV—Design of concrete pavements. Delft, Netherlands: Delft University of Technology.
Huang, H. Y. 2004. Pavement analysis and design. 2nd ed. Upper Saddle River, NJ: Pearson Education.
Hughes, C. S., J. S. Moulthrop, S. Tayabji, R. M. Weed, and J. L. Burati. 2011. Guidelines for quality-related pay adjustment factors for pavement. Washington, DC: Transportation Research Board.
Jung, Y. S., D. G. Zollinger, B. H. Cho, M. Won, and A. J. Wimsatt. 2012. Subbase and subgrade performance investigation and design guidelines for concrete pavement. College Station, TX: Texas Transportation Institute.
Lee, K., H. Kim, N. Kim, and Y. Kim. 2002. Dynamic modulus of asphalt mixtures for development of Korean pavement design guide. West Conshohocken, PA: ASTM.
Leiva-Villacorta, F., L. Loría, and J. P. Aguiar-Moya. 2013. “Development of an improved and more effective dynamic modulus model for mixtures in Costa Rica by means of artificial neural networks.” In Proc., 92nd Annual Meeting of the Transportation Research Board. Washington, DC: Transportation Research Board.
Li, J., A. Zofka, and I. Yut. 2012. “Evaluation of dynamic modulus of typical asphalt mixtures in northeast US region.” Mater. Pavement Des. 13 (2): 249–265. https://doi.org/10.1080/14680629.2012.666641.
Maher, A., and T. Bennert. 2008. Evaluation of Poisson’s ratio for use in the mechanistic empirical pavement design guide (MEPDG). Piscataway, NJ: Rutgers State Univ. of New Jersey.
McGennis, R. B., R. M. Anderson, T. W. Kennedy, and M. Solaimanian. 1995. Background of superpave asphalt mixture design & analysis. Lexington, KY: National Asphalt Training Center.
Molenaar, A. A. A. 2009. Structural design of pavements. Part III: Design of flexible pavements. Delft, Netherlands: Delft University of Technology (TU Delft).
Nielsen, L. E. 1970. “Generalized equation for the elastic moduli of composite materials.” J. Appl. Phys. 41 (11): 4626–4627. https://doi.org/10.1063/1.1658506.
Peinado, F., E. Medel, R. Silvestre, and A. Garcia. 2014. “Open-grade wearing course of asphalt mixture containing ferrite for use as ferromagnetic pavement.” Compos. Part B 57 (2014): 262–268. https://doi.org/10.1016/j.compositesb.2013.10.008.
Pezzano, P. 2009. La progettazione e la verifica di pavimentazioni stradali rinforzate innovative. Bologna, Italy: Università degli Studi di Bologna.
Popovics, J. S. 2008. A study of static and dynamic modulus of elasticity of concrete. Urbana, IL: Univ. of Illinois at Urbana-Champaign.
Praticò, F. G., S. Noto, and A. Astolfi. 2016. “Issues and perspectives in the application of different pavement design methods to life cycle cost analysis.” In Proc., 8th Int. Conf. on Maintenance and Rehabilitation of Pavements. Wuhan, China: Research Publishing.
Praticò, F. G., R. Vaiana, and M. Giunta. 2013. “Pavement sustainability: Permeable wearing courses by recycling porous European mixes.” J. Archit. Eng. 19 (3): 186–192. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000127.
Putri, E. E., N. S. V. Kameswara Rao, and M. A. Mannan. 2012. “Evaluation of modulus of elasticity and modulus of subgrade reaction of soils using CBR test.” J. Civ. Eng. Res. 2 (1): 34–40. https://doi.org/10.5923/j.jce.20120201.05.
Riccardi, C. 2017. Mechanistic modelling of bituminous mortars to predict performance of asphalt mixtures containing rap. Florence, Italy: Univ. of Florence.
Rojas, J., S. Nazarian, V. Tandon, and D. Yuan. 1998. “Quality management of asphalt-concrete layers using wave propagation techniques.” In Proc., AAPT Annual Meeting. Lino Lakes, MN: Association of Asphalt Paving Technologists.
Seo, J., Y. Kim, J. Cho, and S. S. Jeong. 2013. “Estimation of in situ dynamic modulus by using MEPDG dynamic modulus and FWD data at different temperatures.” Int. J. Pavement Eng. 14 (4): 343–353. https://doi.org/10.1080/10298436.2012.664274.
Shahadan, Z., M. O. Hamzah, A. S. Yahya, and A. Jamshidi. 2013. “Evaluation of the dynamic modulus of asphalt mixture incorporating reclaimed asphalt pavement.” Indian J. Eng. Mater. Sci. 20 (5): 376–384.
Sukirman, S. 2010. The hot mix of asphalt concrete. Yogyakarta, Indonesia: Granit.
Walls, J., and M. R. Smith. 1998. Life-cycle cost analysis. Washington, DC: Federal Highway Administration.
WAQTC (Western Alliance for Quality Transportation Construction). 2012. Volumetric properties of hot mix asphalt (HMA). WAQTC TM 13. Salem, Oregon: WAQTC.
Witczak, M. W., and O. A. Fonseca. 1996. “Revised predictive model for dynamic (complex) modulus of asphalt mixtures.” Transp. Res. Rec. 1540 (1): 15–23. https://doi.org/10.1177/0361198196154000103.
Witczak, M. W., K. Kaloush, T. Pellinen, M. El-Basyouny, and H. V. Quintus. 2002. Simple performance test for superpave mix design. Washington, DC: Transportation Research Board.
Wu, Z., X. Yangb, and X. Sun. 2017. “Application of Monte Carlo filtering method in regional sensitivity analysis of AASHTO Ware pavement ME design.” J. Traffic Transp. Eng. 4 (2): 185–197. https://doi.org/10.1016/j.jtte.2017.03.006.
Xiao, Y. 2009. “Evaluation of engineering properties of hot mix asphalt concrete for the mechanistic empirical pavement design.” Electronic Theses, Treatises and Dissertations. Dept. of Civil and Environmental Engineering, Florida State Univ. College of Engineering.
Yousefdoost, S., B. Vuong, I. Rickards, P. Armstrong, and B. Sullivan. 2013. “Evaluation of dynamic modulus predictive models for typical australian asphalt mixes.” In Proc., 15th Int. Flexible Pavements Conf. Port Melbourne, VIC: Australian Asphalt Pavement Association.
Yu, J. 2012. Modification of dynamic modulus predictive models for asphalt mixtures containing recycled asphalt shingles. Ames, IA: Iowa State Univ.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 32 • Issue 5 • May 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Feb 26, 2019
Accepted: Sep 10, 2019
Published online: Feb 18, 2020
Published in print: May 1, 2020
Discussion open until: Jul 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.