Investigations on the Influence of Binders toward Rheological Behavior of Cementitious Pastes
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 3
Abstract
The lubrication layer of concrete plays a vital role in the pumping of concrete. In the present study, the influence of different types of binders ordinary portland cement (OPC), Portland pozzolana cement (PPC), portland slag cement (PSC), and solid volume fraction on the flow properties of the lubrication layer (cementitious pastes) corresponding to 3 grades (M30, M40, and M50) of concrete were investigated. From the results, it is evident that the solid volume fraction (SVF) and shape of binders influence the rheology of cementitious pastes predominantly. Specifically, nonlinear behavior is much pronounced with because of shear thickening of cementitious pastes in addition to the shape of particles. Further, this study also emphasizes the need for assessment of the lubrication layer through fundamental parameters (yield stress and plastic viscosity) compared with empirical parameters (spread). The research findings of this paper will be helpful in understanding the pumping potential of concretes with similar cementitious paste composition.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support of Mr. Revanthkumar, Mr. Ponambalamoorthy and Lab. staffs of SEMT Laboratory, IIT Bombay is acknowledged. DST FIST support for the purchase of rheometer used in this project is acknowledged. The materials support DIRK India Pvt. Ltd. (fly ash) and JSW cement ltd. (ground granulated blast furnace slag) is highly appreciated.
References
Al-Kadhimi, T. K., B. G. Ikzer, and S. F. Al-Takarli. 1988. “The combined effect of chlorides and sulphates present in water and aggregates on properties of concrete.” Mater. Struct. 21 (6): 436–442. https://doi.org/10.1007/BF02472324.
Banfill, P. F. G. 1994. “Rheological methods for assessing the flow properties of mortar and related materials.” Const. Build. Mater. 8 (1): 43–50. https://doi.org/10.1016/0950-0618(94)90007-8.
Banfill, P. F. G. 2003. “The rheology of fresh cement and concrete: A review.” In Vol. 1 of Proc., 11th Int. Cement Chemistry Congress. Edited by Harald Justnes, 50–62. Skokie, IL: Portland Cement Association.
Berg, W. 1979. “Influence of specific surface and concentration of solids upon the flow behaviour of cement pastes.” Mag. Concr. Res. 31 (109): 211–216. https://doi.org/10.1680/macr.1979.31.109.211.
BIS (Bureau of Indian Standards). 2015a. Portland slag cement: Specification. IS 455. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2015b. Portland pozzolana cement- Specification: Fly ash based. IS 1489: Part 1. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2015c. Ordinary portland cement: Specifications. IS 269. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2016. Method of physical tests for hydraulic cement: Determination of fineness by dry sieving. IS 4031: Part 1. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2018a. Methods of physical tests for hydraulic cement-determination of consistency of fineness by blaine air permeability method. IS 4031: Part 2. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2018b. Specification for planetary mixer used in tests for cement and pozzolana. IS 10890. New Delhi, India: BIS.
BIS (Bureau of Indian Standards). 2019. Methods of physical tests for hydraulic cement-determination of initial and final setting times. IS 4031: Part 5. New Delhi, India: BIS.
Chen, L., G. Liu, W. Cheng, and G. Pan. 2016. “Pipe flow of pumping wet shotcrete based on lubrication layer.” SpringerPlus 5 (1): 945. https://doi.org/10.1186/s40064-016-2633-3.
Choi, M., N. Roussel, Y. Kim, and J. Kim. 2013a. “Lubrication layer properties during concrete pumping.” Cem. Concr. Res. 45 (1): 69–78. https://doi.org/10.1016/j.cemconres.2012.11.001.
Choi, M. S., Y. J. Kim, and S. H. Kwon. 2013b. “Prediction on pipe flow of pumped concrete based on shear-induced particle migration.” Cem. Concr. Res. 52 (Oct): 216–224. https://doi.org/10.1016/j.cemconres.2013.07.004.
Erdoǧan, S. T., N. S. Martys, C. F. Ferraris, and D. W. Fowler. 2008. “Influence of the shape and roughness of inclusions on the rheological properties of a cementitious suspension.” Cem. Concr. Comp. 30 (5): 393–402. https://doi.org/10.1016/j.cemconcomp.2008.01.003.
Ferraris, C. F., K. H. Obla, and R. Hill. 2001. “The influence of mineral admixtures on the rheology of cement paste and concrete.” Cem. Concr. Res. 31 (2): 245–255. https://doi.org/10.1016/S0008-8846(00)00454-3.
Feys, D., R. Cepuritis, S. Jacobsen, K. Lesage, E. Secrieru, and A. Yahia. 2017. “Measuring rheological properties of cement pastes: Most common techniques, procedures and challenges.” RILEM Tech. Lett. 2: 129–135. https://doi.org/10.21809/rilemtechlett.2017.43.
Gołaszewski, J. 2008. “Influence of cement properties on rheology of fresh cement mortars without and with superplasticizer.” Arch. Civ. Eng. Environ. 1 (4): 49–66.
Hoffman, R. L. 1988. “Explanations for the causes of shear thickening in concentrated colloidal suspensions.” J. Rheol. 42 (1): 111–123. https://doi.org/10.1122/1.550884.
Jones, T. E. R., and S. Taylor. 1977. “A mathematical model for the flow curve of cement paste.” Mag. Concr. Res. 29 (101): 207–212. https://doi.org/10.1680/macr.1977.29.101.207.
Kantro, D. L. 1980. “Influence of water-reducing admixtures on properties of cement paste—A miniature slump test.” Cem. Concr. Aggregates 2 (2): 95–102. https://doi.org/10.1520/CCA10190J.
Kwon, S. H., K. P. Jang, J. H. Kim, and S. P. Shah. 2016. “State of the art on prediction of concrete pumping.” Supplement, Int. J. Concr. Struct. Mater. 10 (S3): 75–85. https://doi.org/10.1007/s40069-016-0150-y.
Moosberg-Bustnes, H., B. Lagerblad, and E. Forssberg. 2004. “The function of fillers in concrete.” Mat. Struct. 37 (2): 74–81. https://doi.org/10.1007/BF02486602.
Nanthagopalan, P., and M. Santhanam. 2008. “A new approach to optimization of paste composition in SCC.” Ind. Concr. J. 82 (11): 11–18.
Nehdi, M., and M. A. Rahman. 2004. “Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction.” Cem. Concr. Res. 34 (11): 1993–2007. https://doi.org/10.1016/j.cemconres.2004.02.020.
Ngo, T. T., E. H. Kadri, R. Bennacer, and F. Cussigh. 2010. “Use of tribometer to estimate interface friction and concrete boundary layer composition during the fluid concrete pumping.” Const. Build. Mat. 24 (7): 1253–1261. https://doi.org/10.1016/j.conbuildmat.2009.12.010.
Papo, A. 1988. “Rheological models for cement pastes.” Mat. Struct. 21 (1): 41–46. https://doi.org/10.1007/BF02472527.
Papo, A., and L. Piani. 2004. “Effect of various superplasticizers on the rheological properties of portland cement pastes.” Cem. Concr. Res. 34 (11): 2097–2101. https://doi.org/10.1016/j.cemconres.2004.03.017.
Park, C. K., M. H. Noh, and T. H. Park. 2005. “Rheological properties of cementitious materials containing mineral admixtures.” Cem. Concr. Res. 35 (5): 842–849. https://doi.org/10.1016/j.cemconres.2004.11.002.
Saak, A. W., H. M. Jennings, and S. P. Shah. 2001. “New methodology for designing self-compacting concrete.” Mater. J. ACI 98 (6): 429–439.
Santamarina, J. C., and G. C. Cho. 2004. “Soil behaviour: The role of particle shape.” In Vol. 1 of Advances in Geotechnical Engineering: The Skempton Conf., 604–617. London: Thomas Telford.
Singh, B., S. P. Singh, and B. Singh. 2004. “Some issues related to pumping of concrete.” Ind. Concr. J. 78: 41–44.
Szecsy, R. S. 1997. “Concrete rheology.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Illinois at Urbana-Champaign.
Tattersall, G. H., and P. F.G. Banfill. 1983. The rheology of fresh concrete. London: Pitman Advanced Publishing Program.
Wallevik, J. E. 2004. “Microstructure-Rheology: Thixotropy and workability loss” In Nordic Concrete Research. Oslo, Norway: Nordic Concrete Federation.
Wallevik, J. E. 2009. “Rheological properties of cement paste: Thixotropic behaviour and structural breakdown” Cem. Concr. Res. 39 (1): 14–29. https://doi.org/10.1016/j.cemconres.2008.10.001.
Yahia, A. 2011. “Shear-thickening behaviour of high-performance cement grouts—Influencing mix-design parameters” Cem. Concr. Res. 41 (3): 230–235. https://doi.org/10.1016/j.cemconres.2010.11.004.
Zhang, X., and J. Han. 2000. “The effect of ultra-fine admixture on the rheological property of cement paste” Cem. Conr. Res. 30 (5): 827–830. https://doi.org/10.1016/S0008-8846(00)00236-2.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 22, 2019
Accepted: Jul 25, 2019
Published online: Dec 26, 2019
Published in print: Mar 1, 2020
Discussion open until: May 26, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.