Review of Modern Wood Fungal Decay Research for Implementation into a Building Standard of Practice
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 12
Abstract
Wood is one of the most advantageous structural materials available today because of its renewability, natural carbon sequestration, affordability, and relative ease to construct. Unfortunately, this ease of fabrication makes it possible to change wood structures in the field without extensive review and planning. Forensic studies have pointed to poor construction execution or material specification. Thus, as part of a Structural Engineering Institute (SEI)-funded special project awarded to the SEI Performance of Wood Structures Committee to lead towards the development of a standard of practice for the performance of wood structures, this paper examines the role of damage mechanisms caused by decay fungi through the review of the state of the art in research regarding common wood-affecting fungal species in the US. While a properly designed and constructed building envelope is most important, techniques in both the identification and prevention of fungal wood decay are reviewed in this paper as leverage in the development of a standard of practice for wood structures for design, construction, and service.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was performed as part of a special project sponsored by the ASCE Structural Engineering Institute Technical Activities Division awarded to the Committee on the Performance of Wood Structures to establish standards of practice for wood structures. The views expressed are those of the authors and may not represent the official position of ASCE or SEI.
References
Adedeji, G. A., O. Y. Ogunsanwo, and T. O. Elufioye. 2017. “Quantifications of phytochemicals and biocide actions of Lawsonia inermis linn. extracts against wood termites and fungi.” Int. Biodeterior. Biodegrad. 116 (Jan): 155–162. https://doi.org/10.1016/j.ibiod.2016.10.026.
Bami, L. K., and B. Mohebby. 2011. “Bioresistance of poplar wood compressed by combined hydro-thermo-mechanical wood modifications (CHTM): Soft rot and brown-rot.” Int. Biodeterior. Biodegrad. 65 (6): 866–870. https://doi.org/10.1016/j.ibiod.2011.03.011.
BSI (British Standard Institution). 1997. Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values. BS EN 113. London: BSI.
Clausen, C. A., and V. Yang. 2007. “Protecting wood from mould, decay, and termites with multi-component biocide systems.” Int. Biodeterior. Biodegrad. 59 (1): 20–24. https://doi.org/10.1016/j.ibiod.2005.07.005.
Cookson, L. J., D. Page, and T. Singh. 2014. “Accelerated above-ground decay testing in Australia and New Zealand.” Int. Biodeterior. Biodegrad. 86 (Jan): 210–217. https://doi.org/10.1016/j.ibiod.2013.09.021.
Curling, S. F., C. A. Clausen, and J. E. Winandy. 2001. The effect of hemicellulose degradation on the mechanical properties of wood during brown rot decay. Madison, WI: The International Research Group on Wood Preservation.
Curling, S. F., C. A. Clausen, and J. E. Winandy. 2002. “Relationships between mechanical properties, weight loss, and chemical composition of wood during incipient brown-rot decay.” For. Prod. J. 52 (7/8): 34–39.
Dackermann, U., K. Crews, B. Kasal, J. Li, M. Riggio, F. Rinn, and T. Tannert. 2014. “In situ assessment of structural timber using stress-wave measurements.” Mater. Struct. 47 (5): 787–803. https://doi.org/10.1617/s11527-013-0095-4.
De Filpo, G., A. M. Palermo, F. Rachiele, and F. Pasquale. 2013. “Preventing fungal growth in wood by titanium dioxide nanoparticles.” Int. Biodeterior. Biodegrad. 85 (Nov): 217–222. https://doi.org/10.1016/j.ibiod.2013.07.007.
De Vetter, L., M. Stevens, and J. Van Acker. 2009. “Fungal decay resistance and durability of organosilicon-treated wood.” Int. Biodeterior. Biodegrad. 63 (2): 130–134. https://doi.org/10.1016/j.ibiod.2008.08.002.
Eller, F. J., C. A. Clausen, F. Green, and S. L. Taylor. 2010. “Critical fluid extraction of Juniperus virginiana L. and bioactivity of extracts against subterranean termites and wood-rot fungi.” Ind. Crops Prod. 32 (3): 481–485. https://doi.org/10.1016/j.indcrop.2010.06.018.
Eller, F. J., W. T. Hay, G. T. Kirker, M. E. Mankowski, and G. W. Selling. 2018. “Hexadecyl ammonium chloride amylose inclusion complex to emulsify cedarwood oil and treat wood against termites and wood-decay fungi.” Int. Biodeterior. Biodegrad. 129 (Apr): 95–101. https://doi.org/10.1016/j.ibiod.2018.01.010.
FPL (Forest Products Laboratory). 1967. Comparative decay resistance of heartwood of native species. FPL-0153. Madison, WI: US Dept. of Agriculture, Forest Service.
FPL (Forest Products Laboratory). 2000. Stress wave timing nondestructive evaluation tools for inspecting historic structures; a guide for use and interpretation. FPL-GTR-119. Madison, WI: US Dept. of Agriculture, Forest Service.
FPL (Forest Products Laboratory). 2010. Wood handbook: Wood as an engineering material. FPL-GTR-190. Madison, WI: US Dept. of Agriculture, Forest Service.
Fuhr, M. J., C. Stührk, B. Münch, F. W. M. R. Schwarze, and M. Schubert. 2012. “Automated quantification of the impact of the wood-decay fungus Physisporinus vitreus on the cell wall structure of Norway spruce by tomographic microscopy.” Wood Sci. Technol. 46 (4): 769–779. https://doi.org/10.1007/s00226-011-0442-y.
Gao, J., J. S. Kim, N. Terziev, I. Cuccui, and G. Daniel. 2018. “Effect of thermal modification on the durability and decay patterns of hardwoods and softwoods exposed to soft rot fungi.” Int. Biodeterior. Biodegrad. 127 (Feb): 35–45. https://doi.org/10.1016/j.ibiod.2017.11.009.
Gao, J., J. S. Kim, N. Terziev, and G. Daniel. 2016. “Decay resistance of softwoods and hardwoods thermally modified by the Thermovouto type thermos-vacuum process to brown rot and white rot fungi.” Holzforschung 70 (9): 877–884. https://doi.org/10.1515/hf-2015-0244.
Ghosh, S. C., H. Millitz, and C. Mai. 2009. “The efficacy of commercial silicones against blue stain and mould fungi in wood.” Eur. J. Wood Wood Prod. 67 (2): 159–167. https://doi.org/10.1007/s00107-008-0296-7.
Gradeci, K., N. Labonnote, J. Köhler, and B. Time. 2017. “Mould models applicable to wood-based materials: A generic framework.” Energy Procedia 132 (Oct): 177–182. https://doi.org/10.1016/j.egypro.2017.09.751.
Green, B., P. D. Jones, D. D. Nicholas, L. R. Schimleck, and R. Shmulsky. 2011. “Non-destructive assessment of Pinus spp. Wafers subjected to Gloeophyllum trabeum in soil block decay tests by diffuse reflectance near infrared spectroscopy.” Wood Sci. Technol. 45 (3): 583–595. https://doi.org/10.1007/s00226-010-0368-9.
Hakkou, M., M. Pétrissans, P. Gérardin, and A. Zoulalian. 2006. “Investigations of the reasons for fungal durability of heat-treated beech wood.” Polym. Degrad. Stab. 91 (2): 393–397. https://doi.org/10.1016/j.polymdegradstab.2005.04.042.
Hedrick, S. E., II, R. M. Bennett, S. S. Kelley, and T. G. Rials. 2004. “Determination of wood properties using near infrared sprectoscopy.” In Proc., Structures: Building on the Past, Securing the Future, 1–8. Reston, VA: ASCE.
Hedrick, S. E., II, R. M. Bennett, T. G. Rials, and S. S. Kelley. 2007. “Correlation of near-infrared spectroscopy measurements with the properties of treated wood.” J. Mater. Civ. Eng. 19 (4): 279–285. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:4(279).
Hervé, V., F. Mothe, C. Freyburger, E. Gelhaye, and P. Frey-Klett. 2014. “Density mapping of decaying wood using X-ray computed tomography.” Int. Biodeterior. Biodegrad. 86 (Part C): 358–363. https://doi.org/10.1016/j.ibiod.2013.10.009.
Hill, C. A. S., S. C. Forster, M. R. M. Farahani, M. D. C. Hale, G. A. Ormondroyd, and G. R. Williams. 2005. “An investigation of cell wall micropore blocking as a possible mechanism for the decay resistance of anhydride modified wood.” Int. Biodeterior. Biodegrad. 55 (1): 69–76. https://doi.org/10.1016/j.ibiod.2004.07.003.
Hsu, F.-L., P.-S. Chen, H.-T. Chang, and S.-T. Chang. 2009. “Effects of alkyl chain length of gallate on their antifungal property and potency as an environmentally benign preservative against wood-decay fungi.” Int. Biodeterior. Biodegrad. 63 (5): 543–547. https://doi.org/10.1016/j.ibiod.2009.02.005.
Jones, P. D., L. R. Schimleck, G. F. Peter, R. F. Daniels, and A. Clark III. 2005. “Nondestructive estimation of Pinus taeda L. wood properties for samples from a wide range of sites in Georgia.” Can. J. For. Res. 35 (1): 85–92. https://doi.org/10.1139/x04-160.
Kartal, S. N., F. Green III., and C. A. Clausen. 2009a. “Do the unique properties of nanometals affect leachability or efficacy against fungi and termites?” Int. Biodeterior. Biodegrad. 63 (4): 490–495. https://doi.org/10.1016/j.ibiod.2009.01.007.
Kartal, S. N., W.-J. Hwang, A. Yamamoto, M. Tanaka, K. Matsumura, and Y. Imamura. 2007. “Wood modification with a commercial silicon emulsion: Effects on boron release and decay and termite resistance.” Int. Biodeterior. Biodegrad. 60 (3): 189–196. https://doi.org/10.1016/j.ibiod.2007.03.002.
Kartal, S. N., T. Yoshimura, and Y. Imamura. 2009b. “Modification of wood with Si compounds to limit boron leaching from treated wood and to increase termite and decay resistance.” Int. Biodeterior. Biodegrad. 63 (2): 187–190. https://doi.org/10.1016/j.ibiod.2008.08.006.
Kirker, G. T., A. B. Bishell, and S. L. Zelinka. 2016. “Electrical properties of wood colonized by Gloeophyllum trabeum.” Int. Biodeterior. Biodegrad. 114 (Oct): 110–115. https://doi.org/10.1016/j.ibiod.2016.06.004.
Kwaśniewska-Sip, P., G. Cofta, and P. B. Nowak. 2018. “Resistance of fungal growth on Scots pine treated with caffeine.” Int. Biodeterior. Biodegrad. 132 (Aug): 178–184. https://doi.org/10.1016/j.ibiod.2018.03.007.
Li, S.-J., T.-T.-H. Nguyen, S.-Y. Han, and J. Li. 2011. “Application of rosin in wood preservation.” Chem. Ind. For. Prod. 31 (5): 117–121.
Liu, M., H. Zhong, E. Ma, and R. Liu. 2018. “Resistance to fungal decay of paraffin wax emulsion/copper azole compound system treated wood.” Int. Biodeterior. Biodegrad. 129 (Apr): 61–66. https://doi.org/10.1016/j.ibiod.2018.01.005.
Machek, L., M.-L. Edlund, R. Sierra-Alvarez, and H. Militz. 2004. “A non-destructive approach for assessing decay in preservative treated wood.” Wood Sci. Technol. 37 (5): 411–417. https://doi.org/10.1007/s00226-002-0161-5.
Mantanis, G., E. Terzi, S. N. Kartal, and A. N. Papadopoulos. 2014. “Evaluation of mold, decay and termite resistance of pine wood treated with zinc- and copper-based nanocompounds.” Int. Biodeterior. Biodegrad. 90 (May): 140–144. https://doi.org/10.1016/j.ibiod.2014.02.010.
Mohareb, A., P. Sirmah, M. Pétrissans, and P. Gérardin. 2012. “Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus patula.” Eur. J. Wood Wood Prod. 70 (4): 519–524. https://doi.org/10.1007/s00107-011-0582-7.
Mohebby, B. 2005. “Attenuated total reflection infrared spectroscopy of white-rot decayed beech wood.” Int. Biodeterior. Biodegrad. 55 (4): 247–251. https://doi.org/10.1016/j.ibiod.2005.01.003.
Mohebby, B., H. Sharifnia-Dizboni, and S. Kazemi-Najafi. 2009. “Combined hydro-thermo-mechanical modification (CHTM) as an innovation in mechanical wood modification.” In Proc., 4th European Conf. on Wood Modification, 353–362. Stockholm, Sweden: SP Technical Research Institute of Sweden.
Moya, R., A. Berrocal, A. Rodriquez-Zuñiga, J. Vega-Baudrit, and S. C. Noguera. 2014. “Effect of silver nanoparticles on white-rot wood decay and some physical properties of three tropical wood species.” Wood Fiber Sci. 46 (4): 527–538. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000535.
Nguyen, T. T. H., J. Li, and S. Li. 2012. “Effects of water-borne rosin on the fixation and decay resistance of copper-based preservative treated wood.” BioResources 7 (3): 3573–3584.
Nicholas, D. D., and D. Crawford. 2003. “Concepts in the development of new accelerated test methods for wood decay.” In Development of commercial wood preservatives: Efficacy, environmental, and health issues, edited by T. P. Schultz, H. Militz, M. H. Freeman, B. Goodell, and D. D. Nicholas, 288–312. Washington, DC: American Chemical Society.
Palanti, S., E. Feci, G. Predieri, and F. Vignali. 2012. “A wood treatment based on siloxanes and boric acid against fungal decay and coleopter Hylotrupes bajulus.” Int. Biodeterior. Biodegrad. 75 (Nov): 49–54. https://doi.org/10.1016/j.ibiod.2012.07.019.
Palanti, S., G. Predieri, F. Vignali, E. Feci, A. Casoli, and E. Conti. 2011. “Copper complexes grafted to functionalized silica gel as wood preservatives against the brown rot fungus Coniophora puteana.” Wood Sci. Technol. 45 (4): 707–718. https://doi.org/10.1007/s00226-010-0396-5.
Pandey, K. K., and A. J. Pitman. 2003. “FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi.” Int. Biodeterior. Biodegrad. 52 (3): 151–160. https://doi.org/10.1016/S0964-8305(03)00052-0.
Przewloka, S. R., D. M. Crawford, D. R. Rammer, D. L. Buckner, B. M. Woodward, G. Li, and D. D. Nicholas. 2008. “Assessment of biodeterioration for the screening of new wood preservatives: Calculation of stiffness loss in rapid decay testing.” Holzforschung 62 (3): 270–276. https://doi.org/10.1515/HF.2008.024.
Ringman, R., A. Pilgård, C. Brischke, and K. Richter. 2014. “Mode of action of brown rot decay resistance in modified wood: A review.” Holzforschung 68 (2): 239–246. https://doi.org/10.1515/hf-2013-0057.
Rowell, R. M., and J. P. Dickerson. 2014. “Acetylation of wood.” In Deterioration and protection of sustainable biomaterials, edited by T. P. Schultz, B. Goodell, and D. D. Nicholas, 301–327. Washington, DC: American Chemical Society.
Rowell, R. M., R. E. Ibach, J. McSweeny, and T. Nilsson. 2009. “Understanding decay resistance, dimensional stability and strength changes in heat treated and acetylated wood.” In Proc., 4th European Conf. on Wood Modification, 489–502. Stockholm, Sweden: SP Technical Research Institute of Sweden.
Sandak, A., S. Ferrari, J. Sandak, O. Allegretti, N. Terziev, and M. Riggio. 2013. “Monitoring of wood decay by near infrared spectroscopy.” Adv. Mater. Res. 778 (Sep): 802–809. https://doi.org/10.4028/www.scientific.net/AMR.778.802.
Schneider, M. 2007. “Furfurylation of wood overview.” In Proc., 28th Annual General Meeting of the CWPA, 118–123. Campbellville, ON: Canadian Wood Preservation Association.
Schubert, M., T. Volkmer, C. Lehringer, and F. W. M. R. Schwarze. 2011. “Resistance of bioincised wood treated with wood preservatives to blue-stain and wood-decay fungi.” Int. Biodeterior. Biodegrad. 65 (1): 108–115. https://doi.org/10.1016/j.ibiod.2010.10.003.
Sen, S., C. Tascioglu, and K. Tirak. 2009. “Fixation, leachability, and decay resistance of wood treated with some commercial extracts and wood preservative salts.” Int. Biodeterior. Biodegrad. 63 (2): 135–141. https://doi.org/10.1016/j.ibiod.2008.07.007.
Shaji, T., S. Somayaji, and M. S. Mathews. 2000. “Ultrasonic pulse velocity technique for inspection and evaluation of timber.” J. Mater. Civ. Eng. 12 (2): 180–185. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(180).
Singh, T., and A. P. Singh. 2012. “A review on natural products as wood protectant.” Wood Sci. Technol. 46 (5): 851–870. https://doi.org/10.1007/s00226-011-0448-5.
Tavallo, F., M. D. Pandey, and G. Cascante. 2013. “Experimental and numerical methods for detection of voids in wood poles using ultrasonic testing.” J. Mater. Civ. Eng. 25 (6): 772–780. https://doi.org/10.1061/%28ASCE%29MT.1943-5533.0000535.
Terzi, E., S. N. Kartal, N. Yilgör, L. Rautkari, and T. Yoshimura. 2016. “Role of various nano-particles in prevention of fungal decay, mold growth and termite attack in wood, and their effect on weathering properties and water repellency.” Int. Biodeterior. Biodegrad. 107 (Feb): 77–87. https://doi.org/10.1016/j.ibiod.2015.11.010.
Tumen, I., F. J. Eller, C. A. Clausen, and J. A. Teel. 2013. “Antifungal activity of heartwood extracts from three Juniperus species.” BioResources 8 (1): 12–20.
Unsal, O., S. N. Kartal, Z. Candan, R. A. Arango, C. A. Clausen, and F. Green III. 2009. “Decay and termite resistance, water absorption and swelling of thermally compressed wood panels.” Int. Biodeterior. Biodegrad. 63 (5): 548–552. https://doi.org/10.1016/j.ibiod.2009.02.001.
Viitanen, H., T. Toratti, L. Makkonen, R. Peuhkuri, T. Ojanen, L. Ruokolainen, and J. Räisänen. 2010. “Towards modelling of decay risk of wooden materials.” Eur. J. Wood Wood Prod. 68 (3): 303–313. https://doi.org/10.1007/s00107-010-0450-x.
Wacker, J. P., B. K. Brashaw, and F. Jalinoos. 2015. “A field assessment of timber highway bridge durability in the United States.” In Proc., Structures Congress 2015, 278–286. Reston, VA: ASCE.
Wadsö, L., S. Johansson, and S. Bardage. 2017. “Monitoring of fungal colonization of wood materials using isothermal calorimetry.” Int. Biodeterior. Biodegrad. 120 (May): 43–51. https://doi.org/10.1016/j.ibiod.2017.02.003.
Wang, Y., Z. Zhang, H. Fan, and J. Wang. 2018. “Wood carbonization as a protective treatment on resistance to wood destroying fungi.” Int. Biodeterior. Biodegrad. 129 (Apr): 42–49. https://doi.org/10.1016/j.ibiod.2018.01.003.
Weiland, J. J., and R. Guyonnet. 2003. “Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy.” Holz Roh Werkst. 61 (3): 216–220. https://doi.org/10.1007/s00107-003-0364-y.
White, R. H., and R. J. Ross. 2014. Wood and timber condition assessment manual: Second edition. FPL-GTR-234. Madison, WI: US Dept. of Agriculture, Forest Service.
Williams, F. C., and M. D. Hale. 2003. “The resistance of wood chemically modified with isocyanates: The role of moisture content in decay suppression.” Int. Biodeterior. Biodegrad. 52 (4): 215–221. https://doi.org/10.1016/S0964-8305(03)00070-2.
Winandy, J. E., C. A. Clausen, and S. F. Curling. 2000. “Predicting the effects of decay on wood properties and modeling residual service-life.” In Proc., 2nd Annual Conf. on Durability and Disaster Mitigation in Wood-Frame Housing, 261–263. Madison, WI: Forest Products Society.
Winandy, J. E., and J. J. Morrell. 1992. “Relationship between incipient decay, strength, and chemical composition of Douglas-fir heartwood.” Wood Fiber Sci. 25 (3): 278–288.
Witomski, P., W. Olek, and J. T. Bonarski. 2016. “Changes in strength of Scots pine wood (Pinus sylvestris L.) decayed by brown rot (Coniophora puteana) and white rot (Trametes versicolor).” Constr. Build. Mater. 102 (1): 162–166. https://doi.org/10.1016/j.conbuildmat.2015.10.109.
Zhang, Z., T. Yang, N. Mi, Y. Wang, G. Li, L. Wang, and Y. Xie. 2016. “Antifungal activity of monoterpenes against wood white-rot fungi.” Int. Biodeterior. Biodegrad. 106 (Jan): 157–160. https://doi.org/10.1016/j.ibiod.2015.10.018.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 31 • Issue 12 • December 2019
Copyright
©2019 American Society of Civil Engineers.
History
Published online: Oct 12, 2019
Published in print: Dec 1, 2019
Discussion open until: Mar 12, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.