Amorphous Aluminosilicates as a Structure-Forming Additive in Cementitious Systems
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 5
Abstract
The potential of using amorphous aluminosilicate as a modifying agent for the adhesive dry mixes was explored. The technology of preparation of the additive based on amorphous aluminosilicates was investigated. This paper presents experimental data on the influence of amorphous aluminosilicate–based additives on the topological structure and strength of cement paste.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alfimova, N. I., S. Y. Pirieva, D. V. Gudov, I. M. Shurakov, and E. E. Korbut. 2018. “Optimization of receptural-technological parameters of manufacture of cellular concrete mixture.” Constr. Mater. Prod. 1 (2): 30–36.
Artamonova, O. V., G. S. Slavcheva, and E. M. Chernyshov. 2017. “Effectiveness of combined nanoadditives for cement systems.” Inorg. Mater. 53 (10): 1080–1085. https://doi.org/10.1134/S0020168517100028.
Dauji, S. 2018. “Neural prediction of concrete compressive strength.” Int. J. Mater. Struct. Integrity 12 (1–3): 17–35. https://doi.org/10.1504/IJMSI.2018.093884.
Dauji, S., and K. Bhargava. 2016. “Estimation of concrete characteristic strength from limited data by bootstrap.” J. Asian Concr. Fed. 2 (1): 81–94. https://doi.org/10.18702/acf.2016.06.2.1.81.
Dauji, S., and K. Bhargava. 2018. “Comparison of concrete strength from cube and core records by bootstrap.” J. Asian Concr. Fed. 4 (1): 35–46. https://doi.org/10.18702/acf.2018.07.3.1.35.
Fediuk, R. S. 2016. “High-strength fibrous concrete of Russian Far East natural materials.” In Vol. 116 of Proc., IOP Conf. Series: Materials Science and Engineering, 012020. Bristol, UK: IOP Publishing.
Fediuk, R. S. 2018. “Reducing permeability of fiber concrete using composite binders.” Spec. Top. Rev. Porous Media: Int. J. 9 (1): 79–89. https://doi.org/10.1615/SpecialTopicsRevPorousMedia.v9.i1.100.
Fediuk, R. S., A. K. Smoliakov, and A. S. Muraviov. 2017. “Mechanical properties of fiber-reinforced concrete using composite binders.” Adv. Mater. Sci. Eng. 2017: 2316347.
Fediuk, R. S., and A. M. Yushin. 2015. “The use of fly ash the thermal power plants in the construction.” In Vol. 93 of Proc., IOP Conf. Series: Materials Science and Engineering, 012070. Bristol, UK: IOP Publishing.
Fediuk, R. S., and A. M. Yushin. 2016. “Composite binders for concrete with reduced permeability.” In Vol. 116 of Proc., IOP Conf. Series: Materials Science and Engineering, 012021. Bristol, UK: IOP Publishing.
Fomina, E. V., V. V. Strokova, and N. I. Kozhukhova. 2013. “Application of natural aluminosilicates in autoclave cellular concrete.” World Appl. Sci. J. 25 (1): 48–54.
Glagolev, E., L. Suleimanova, and V. Lesovik. 2016. “High reaction activity of nano-size phase of silica composite binder.” Int. J. Environ. Sci. Educ. 11 (18): 12383–12389.
Gorchakov, G. I., M. M. Kapkin, and B. G. Skramtai. 1965. The increase of frost resistance of concrete, 190. Moscow: Stroyizdat.
Ibragimov, R. A. 2016. “The influence of binder modification by means of the superplasticizer and mechanical activation on the mechanical properties of the high-density concrete.” ZKG Int. 69 (6): 34–39.
Ibragimov, R. A., and S. I. Pimenov. 2016. “Influence of mechanochemical activation on the cement hydration features.” Mag. Civ. Eng. 62 (2): 3–12. https://doi.org/10.5862/MCE.62.1.
Klyuev, S. V., T. A. Khezhev, Y. V. Pukharenko, and A. V. Klyuev. 2018. “Fiber concrete on the basis of composite binder and technogenic raw materials.” Mater. Sci. Forum 931: 603–607. https://doi.org/10.4028/www.scientific.net/MSF.931.603.
Loganina, V. I., M. V. Ariskin, O. V. Karpova, and K. V. Zhegera. 2015. “Evaluation of crack resistance of the finishing layer based on adhesive dry mixture with synthetic aluminum silicates.” Build. Mater. 10: 1086. https://doi.org/10.31659/0585-430X-2015-730-10-86-88.
Loganina, V. I., L. V. Makarova, R. V. Tarasov, and A. D. Ryzhov. 2014a. “The limy composite binder with the use of the synthesized alumosilicates.” Appl. Mech. Mater. 662: 11–14. https://doi.org/10.4028/www.scientific.net/AMM.662.11.
Loganina, V. I., L. V. Makarova, R. V. Tarasov, and M. A. Sadovnikova. 2014b. “Composition limy binder with the use of the synthesized alumiosilicates for DTY construction blends.” Adv. Mater. Res. 977: 34–37. https://doi.org/10.4028/www.scientific.net/AMR.977.34.
Loganina, V. I., N. A. Petukhova, V. N. Gorbunov, and T. N. Dmitrieva. 2009. “Prospects for the manufacture of organo-mineral supplements on the basis of domestic raw materials.” Proc. Higher Educ. Inst. Build. 9 (609): 36–39.
Loganina, V. I., and A. D. Ryzhov. 2015. “Structure and properties of synthesized additive based onamorphous aluminosilicates.” Case Stud. Constr. Mater. 3 (C): 132–136.
Loganina, V. I., and K. V. Zhegera. 2014a. “The effect of synthesized aluminosilicates on the structure formation of cement dry building mixtures.” Bull. BSTU 5: 36–40.
Loganina, V. I., and K. V. Zhegera. 2014b. “Evaluating the effectiveness of the use of synthetic aluminum silicates in cement systems.” Acad. Gaz. UralNIIproekt RAASN 3: 84–87.
Loganina, V. I., and K. V. Zhegera. 2015a. “The effectiveness of use of the composite binder as a dry mix.” Case Stud. Constr. Mater. 3 (C): 137–140.
Loganina, V. I., and K. V. Zhegera. 2015b. “Formation of strength of cement composition in the presence of synthesized aluminosilicates.” Constr. Archit. 15 (2): 43–46.
Loganina, V. I., and K. V. Zhegera. 2017a. “Estimation of frost resistance of the tile adhesive on a cement based with application of amorphous aluminosilicates as a modifying additive.” In Vol. 245 of Proc., IOP Conf. Series: Materials Science and Engineering. Bristol, UK: IOP Publishing.
Loganina, V. I., and K. V. Zhegera. 2017b. “Use of the additive based on amorphous silica-alumina in the adhesive dry mixes.” J. Mater. Sci. Eng. 6 (4): 4.
Loganina, V. I., V. I. Zhernovsky, M. A. Sadovnikova, and K. V. Zhegera. 2013. “The addition of aluminosilicate-based cement systems.” East. Eur. J. Adv. Technol. 5: 68–71.
Orentlicher, L. P., and V. I. Loganina. 1992. Protective decorative coatings for concrete and stone buildings: Study guide, 236. Moscow: Stroyizdat.
Ranjbar, N., M. Mehrali, M. Mehrali, U. J. Alengaram, and M. Z. Jumaat. 2016a. “High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber.” Constr. Build. Mater. 112 (Jun): 629–638. https://doi.org/10.1016/j.conbuildmat.2016.02.228.
Ranjbar, N., S. Talebian, M. Mehrali, C. Kuenzel, H. S. Cornelis Metselaar, and M. Z. Jumaat. 2016b. “Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites.” Compos. Sci. Technol. 122 (Jan): 73–81. https://doi.org/10.1016/j.compscitech.2015.11.009.
Stark, U., M. Reinold, and A. Muller. 2003. “Neue Methoden zur Messung der Korngrobe und Kornform von Mikro bis Marko.” Weimar 2003 (1): 11369–11380.
Suleymanova, L. A., V. S. Lesovik, K. R. Kondrashev, K. A. Suleymanov, and N. P. Lukuttsova. 2015. “Energy efficient technologies of production and use non-autoclaved aerated concrete.” Int. J. Appl. Eng. Res. 10 (5): 12399–12406.
Svintsov, A. P., Y. V. Nikolenko, M. I. Kharun, and A. S. Kazakov. 2014. “Effect of viscosity of petroleum products on deformation properties of concrete.” Mag. Civ. Eng. 51 (7): 16–22. https://doi.org/10.5862/MCE.51.2.
Uchaeva, T. V., and V. I. Loganina. 2018. “Analysis of the risk at the finishing of the building products and construction of paint compositions.” Case Stud. Constr. Mater. 8: 213–216.
Yiqing, F., and C. Lianzhang. 1991. “Effect of aqueous boric acid () treatment on catalytic performance of HZSM-5 zeolite catalysts.” Shiyou Jiagong 7 (2): 44.
Zagorodnjuk, L. H., V. S. Lesovik, A. A. Volodchenko, and V. T. Yerofeyev. 2016. “Optimization of mixing process for heat-insulating mixtures in a spiral blade mixer.” Int. J. Pharm. Technol. 8 (3): 15146–15155.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 32 • Issue 5 • May 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jan 10, 2019
Accepted: Jun 28, 2019
Published online: Feb 20, 2020
Published in print: May 1, 2020
Discussion open until: Jul 20, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.