Direct Tensile Properties and Stress–Strain Model of UHP-ECC
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 1
Abstract
This research developed an ultra-high-performance engineered cementitious composite (UHP-ECC), which combines the properties of strain-hardening, multiple cracking, and high mechanical strength. The compressive strength of the UHP-ECC reached 150 MPa at 28 days under standard curing conditions, whereas the tensile strength and strain capacity of the UHP-ECC were 18 MPa and 8%, respectively. Different fiber volumetric ratios and geometries (fiber length and diameter) were used to investigate the influences of fiber-reinforcement parameters on the mechanical and crack-pattern properties of UHP-ECC, including the tensile strength, strain capacity, strain energy, crack number, and crack spacing. It was found that the fiber reinforcement parameters significantly influence both the mechanical properties and crack-patterns of UHP-ECC. Based on the test results, a bilinear tensile stress–strain model was proposed for UHP-ECC and its accuracy was demonstrated through comparisons with the test results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors appreciate the financial support from the National Natural Science Foundation of China (51478406 and 51278441), the Research Grants Council of the Hong Kong SAR (Project Code: 152145/17E), and the Research Institute for Sustainable Urban Development, Hong Kong Polytechnic University through Project 1-BBWE.
References
Aveston, J., and A. Kelly. 1973. “Theory of multiple fracture of fibrous composites.” J. Mater. Sci. 8 (3): 352–362. https://doi.org/10.1007/BF00550155.
Chanvillard, G., and S. Rigaud. 2003. “Complete characterization of tensile properties of DUCTAL UHP-FRC according to the French recommendations.” In Proc., 4th Int. Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC4), 21–34. Ann Arbor, MI: RILEM.
Chinese Standard. 2010. Code for design of concrete structures. GB/T 50010. Beijing: Ministry of Housing and Urban-Rural Development.
Choi, J. I., B. Y. Lee, R. Ranade, V. C. Li, and Y. Lee. 2016. “Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite.” Cem. Concr. Compos. 70 (7): 153–158. https://doi.org/10.1016/j.cemconcomp.2016.04.002.
De Larrard, F., and T. Sedran. 1994. “Optimization of ultra-high-performance concrete by the use of a packing model.” Cem. Concr. Res. 24 (6): 997–1009. https://doi.org/10.1016/0008-8846(94)90022-1.
Ding, Y., J. T. Yu, K. Q. Yu, and S. L. Xu. 2018a. “Basic mechanical properties of ultra-high ductility cementitious composites: From 40 MPa to 120 MPa.” Compos. Struct. 185 (2): 634–645. https://doi.org/10.1016/j.compstruct.2017.11.034.
Ding, Y., K. Q. Yu, J. T. Yu, and S. L. Xu. 2018b. “Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental study.” Constr. Build. Mater. 177 (7): 102–115. https://doi.org/10.1016/j.conbuildmat.2018.05.122.
Graybeal, B. 2007. “Compressive behavior of ultra-high-performance fiber-reinforced concrete.” J. ACI Mater. 104 (2): 146–152.
He, S., J. Qiu, J. Li, and E. H. Yang. 2017. “Strain hardening ultra-high performance concrete (SHUHPC) incorporating CNF-coated polyethylene fibers.” Cem. Concr. Res. 98 (Aug): 50–60. https://doi.org/10.1016/j.cemconres.2017.04.003.
Huang, B. T., Q. H. Li, and S. L. Xu. 2019. “Fatigue deformation model of plain and fiber-reinforced concrete based on Weibull function.” J. Struct. Eng. 145 (1): 04018234. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002237.
Huang, B. T., Q. H. Li, S. L. Xu, W. Liu, and H. T. Wang. 2018. “Fatigue deformation behavior and fiber failure mechanism of ultra-high toughness cementitious composites in compression.” Mater. Des. 157 (Nov): 457–468. https://doi.org/10.1016/j.matdes.2018.08.002.
JSCE (Japan Society of Civil Engineers). 2008. Recommendations for design and construction of high performance fiber reinforced cement composites with multiple fine cracks, 1–16. Tokyo: JSCE.
Jungwirth, J., and A. Muttoni. 2004. “Structural behavior of tension members in ultra high performance concrete.” In Proc., Int. Symp. on Ultra High Performance Concrete, 533–544. Kassel, Germany: Kassel Univ.
Kamal, A., M. Kunieda, N. Ueda, and H. Nakamura. 2008. “Evaluation of crack opening performance of a repair material with strain hardening behavior.” Cem. Concr. Compos. 30 (10): 863–871. https://doi.org/10.1016/j.cemconcomp.2008.08.003.
Kanda, T., and V. C. Li. 1998. “Multiple cracking sequence and saturation in fiber reinforced cementitious composites.” Concr. Res. Technol. 9 (2): 19–33. https://doi.org/10.3151/crt1990.9.2_19.
Kang, S. H., S. G. Hong, and J. Moon. 2018. “Shrinkage characteristics of heat-treated ultra-high performance concrete and its mitigation using superabsorbent polymer based internal curing method.” Cem. Concr. Compos. 89 (May): 130–138. https://doi.org/10.1016/j.cemconcomp.2018.03.003.
Kunieda, M., M. Hussein, and N. Ueda. 2010. “Enhancement of crack distribution of UHP-ECC under axial tension using steel reinforcement.” J. Adv. Concr. Technol. 8 (1): 49–57. https://doi.org/10.3151/jact.8.49.
Li, L. Z., Z. W. Cai, K. Q. Yu, Y. X. Zhang, and Y. Ding. 2019. “Performance-based design of all-grade strain hardening cementitious composites with compressive strengths from 40 MPa to 120 MPa.” Cem. Concr. Compos. 97 (3): 202–217. https://doi.org/10.1016/j.cemconcomp.2019.01.001.
Li, V. C., D. K. Mishra, and H. C. Wu. 1995. “Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites.” Mater. Struct. 28 (10): 586–595. https://doi.org/10.1007/BF02473191.
Li, V. C., S. Wang, and C. Wu. 2001. “Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)” J. ACI Mater. 98 (6): 483–492.
Lin, Z., and V. C. Li. 1997. “Crack bridging in fiber reinforced cementitious composites with slip-hardening interfaces.” J. Mech. Phys. Solids 45 (5): 763–787. https://doi.org/10.1016/S0022-5096(96)00095-6.
Liu, J. C., K. H. Tan, and D. Zhang. 2017. “Multi-response optimization of post-fire performance of strain hardening cementitious composite.” Cem. Concr. Compos. 80 (Jul): 80–90. https://doi.org/10.1016/j.cemconcomp.2017.03.001.
Lu, C., and C. K. Leung. 2017. “Theoretical evaluation of fiber orientation and its effects on mechanical properties in engineered cementitious composites (ECC) with various thicknesses.” Cem. Concr. Res. 95 (May): 240–246. https://doi.org/10.1016/j.cemconres.2017.02.024.
Ma, H., Z. Zhang, B. Ding, and X. Tu. 2018. “Investigation on the adhesive characteristics of Engineered Cementitious Composites (ECC) to steel bridge deck.” Constr. Build. Mater. 191 (Dec): 679–691. https://doi.org/10.1016/j.conbuildmat.2018.10.056.
Maeder, U., I. Lallemant-Gamboa, J. Chaignon, and J. P. Lombard. 2004. “Ceracem, a new high performance concrete: Characterizations and applications.” In Ultra high performance concrete, edited by M. Schmidt, et al., 59–68. Kassel, Germany: Kassel University Press.
Meng, D., C. K. Lee, and Y. X. Zhang. 2017. “Flexural and shear behaviours of plain and reinforced polyvinyl alcohol-engineered cementitious composite beams.” Eng. Struct. 151 (Nov): 261–272. https://doi.org/10.1016/j.engstruct.2017.08.036.
Naaman, A. E. 2008. “High performance fiber reinforced cement composites.” In High-performance construction materials: Science and applications, 91–153. Singapore: World Scientific.
Naaman, A. E., and H. Najm. 1991. “Bond-slip mechanisms of steel fibers in concrete.” J. ACI Mater. 88 (2): 135–145.
Nehdi, M., S. Mindess, and P. C. Aïtcin. 1996. “Optimization of high strength limestone filler cement mortars.” Cem. Concr. Res. 26 (6): 883–893. https://doi.org/10.1016/0008-8846(96)00071-3.
Park, S. H., D. J. Kim, G. S. Ryu, and K. T. Koh. 2012. “Tensile behavior of ultra high performance hybrid fiber reinforced concrete.” Cem. Concr. Compos. 34 (2): 172–184. https://doi.org/10.1016/j.cemconcomp.2011.09.009.
Ranade, R., V. C. Li, M. D. Stults, W. F. Heard, and T. S. Rushing. 2013. “Composite properties of high-strength, high-ductility concrete.” J. ACI Mater. 110 (4): 413–422.
Randl, N., T. Steiner, S. Ofner, E. Baumgartner, and T. Mészöly. 2014. “Development of UHPC mixtures from an ecological point of view.” Constr. Build. Mater. 67 (Sep): 373–378. https://doi.org/10.1016/j.conbuildmat.2013.12.102.
Richard, P., and M. Cheyrezy. 1995. “Composition of reactive powder concretes.” Cem. Concr. Res. 25 (7): 1501–1511. https://doi.org/10.1016/0008-8846(95)00144-2.
Tran, N. T., T. K. Tran, and D. J. Kim. 2015. “High rate response of ultra-high-performance fiber-reinforced concretes under direct tension.” Cem. Concr. Res. 69 (3): 72–87. https://doi.org/10.1016/j.cemconres.2014.12.008.
Wang, Y. C., L. Z. Wei, J. T. Yu, and K. Q. Yu. 2019. “Mechanical properties of high ductile magnesium oxychloride cement-based composites after water soaking.” Cem. Concr. Compos. 97 (Mar): 248–258. https://doi.org/10.1016/j.cemconcomp.2018.12.028.
Wille, K., S. El-Tawil, and A. E. Naaman. 2014. “Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading.” Cem. Concr. Compos. 48 (4): 53–66. https://doi.org/10.1016/j.cemconcomp.2013.12.015.
Wille, K., D. J. Kim, and A. E. Naaman. 2011. “Strain-hardening UHP-FRC with low fiber contents.” Mater. Struct. 44 (3): 583–598. https://doi.org/10.1617/s11527-010-9650-4.
Wu, H. C., and V. C. Li. 1992. “Snubbing and bundling effects on multiple crack spacing of discontinuous random fiber-reinforced brittle matrix composites.” J. Am. Ceram. Soc. 75 (12): 3487–3489. https://doi.org/10.1111/j.1151-2916.1992.tb04457.x.
Wuest, J., E. Denarie, and E. Bruehwiler. 2008. “Model for predicting the UHP-FRC tensile hardening response.” In Proc., 2nd Int. Symp. on Ultra High Performance Concrete, edited by E. Fehling, M. Schmidt, and S. Sturwald, 153–160. Kassel, Germany: Kassel Univ.
Xu, M., and K. Wille. 2015. “Fracture energy of UHP-FRC under direct tensile loading applied at low strain rates.” Composites Part B 80 (10): 116–125. https://doi.org/10.1016/j.compositesb.2015.05.031.
Yoo, D. Y., and N. Banthia. 2016. “Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review.” Cem. Concr. Compos. 73 (10): 267–280. https://doi.org/10.1016/j.cemconcomp.2016.08.001.
Yu, J., and C. K. Leung. 2017. “Strength improvement of strain-hardening cementitious composites with ultrahigh-volume fly ash.” J. Mater. Civ. Eng. 29 (9): 05017003. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001987.
Yu, K. Q., J. G. Dai, Z. D. Lu, and K. Y. Leung. 2015. “Mechanical properties of engineered cementitious composites subjected to elevated temperatures.” J. Mater. Civ. Eng. 27 (10): 04014268. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001241.
Yu, K. Q., J. G. Dai, Z. D. Lu, and C. S. Poon. 2018a. “Rate-dependent tensile properties of ultra-high performance engineered cementitious composites (UHP-ECC).” Cem. Concr. Compos. 93 (Oct): 218–234. https://doi.org/10.1016/j.cemconcomp.2018.07.016.
Yu, K. Q., L. Z. Li, J. Yu, J. Xiao, J. Ye, and Y. Wang. 2018c. “Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar.” Eng. Struct. 170 (Sep): 11–20. https://doi.org/10.1016/j.engstruct.2018.05.037.
Yu, K. Q., L. Z. Li, J. T. Yu, Y. C. Wang, J. H. Ye, and Q. F. Xu. 2018b. “Direct tensile properties of engineered cementitious composites: A review.” Constr. Build. Mater. 165 (Mar): 346–362. https://doi.org/10.1016/j.conbuildmat.2017.12.124.
Yu, K. Q., Y. C. Wang, J. T. Yu, and S. L. Xu. 2017. “A strain-hardening cementitious composites with the tensile capacity up to 8%.” Constr. Build. Mater. 137 (4): 410–419. https://doi.org/10.1016/j.conbuildmat.2017.01.060.
Yu, K. Q., J. T. Yu, J. G. Dai, Z. D. Lu, and S. P. Shah. 2018d. “Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers.” Constr. Build. Mater. 158 (1): 217–227. https://doi.org/10.1016/j.conbuildmat.2017.10.040.
Zhang, Z., Y. Ding, and S. Qian. 2019. “Influence of bacterial incorporation on mechanical properties of engineered cementitious composites (ECC).” Constr. Build. Mater. 196 (Jan): 195–203. https://doi.org/10.1016/j.conbuildmat.2018.11.089.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 29, 2018
Accepted: Jun 17, 2019
Published online: Oct 31, 2019
Published in print: Jan 1, 2020
Discussion open until: Mar 31, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.