Abstract
Tricalcium aluminate () is the most reactive phase in portland cement clinker. In the study of the hydration process, the use of synthetic samples is often preferred over clinker-sourced samples due to the absence of traces of other elements in synthetic . However, the reproduction of results from synthetic samples using clinker-sourced samples is challenging due to the difficulty of complete extraction of aluminate phases from clinkers without damaging their structure. Salicylic and maleic acid/methanol solutions were used in the past to isolate , but complete extraction has not been observed. Thus, it was necessary to modify the selective dissolution (SD) method. Possible processes were tested with white and ordinary portland clinkers. A modified process with maleic acid/methanol solution was developed and the samples were analyzed by X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Raman spectroscopy, compared with synthetic samples. The modified selective dissolution process with maleic acid/methanol solution proposed in this work was effective in achieving complete isolation of aluminate-based phases, and can be used for further studies of the hydration process of clinker-sourced samples to improve the understanding and quality of portland cement clinkers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The participation of J.L. Provis was sponsored by the CNPq (Brazilian National Council for Scientific and Technological Development) PVE Grant No. 407319/2013-1, L.S. Girotto by SWE Grant No. 234321/2014-8 and GM/GD Grant No. 141848/2015-4, E.D.Rodríguez by CNPq PQ Grant No. 303753/2017-0. A.P. Kirchheim acknowledged the financial support by CNPQ PQ Grant No. 305530/2017-8. The authors also acknowledge the Laboratory of Ceramics (LACER) and Building Innovation Research Unit (NORIE) at Federal University of Rio Grande do Sul (UFRGS) and the Department of Materials Science and Engineering at the University of Sheffield. Prof. Paulo Monteiro (University of California, Berkeley) is also acknowledged for his kind support providing the synthetic used in this study.
References
Bensted, J. 1976. “Uses of Raman spectroscopy in cement chemistry.” J. Am. Ceram. Soc. 59 (3–4): 140–143. https://doi.org/10.1111/j.1151-2916.1976.tb09451.x.
Black, L., C. Breen, J. Yarwood, C.-S. Deng, J. Phipps, and G. Maitland. 2006. “Hydration of tricalcium aluminate () in the presence and absence of gypsum: Studied by Raman spectroscopy and X-ray diffraction.” J. Mater. Chem. 16 (13): 1263–1272. https://doi.org/10.1039/b509904h.
Boikova, A. I., A. I. Domansky, V. A. Paramonova, G. P. Stavitskaja, and V. M. Nikushchenko. 1977. “The influence of .” Cem. Concr. Res. 7 (5): 483–492. https://doi.org/10.1016/0008-8846(77)90110-7.
Bonen, D., T. J. Johnson, and S. L. Sarkar. 1994. “Characterization of principal clinker minerals by FT-Raman microspectroscopy.” Cem. Concr. Res. 24 (5): 959–965. https://doi.org/10.1016/0008-8846(94)90016-7.
Bullard, J. W., H. M. Jennings, R. A. Livingston, A. Nonat, G. W. Scherer, J. S. Schweitzer, K. L. Scrivener, and J. J. Thomas. 2011. “Mechanisms of cement hydration.” Cem. Concr. Res. 41 (12): 1208–1223. https://doi.org/10.1016/j.cemconres.2010.09.011.
Cabrera, J. G., and C. Plowman. 1988. “Experimental techniques for studying hydration reactions of calcium aluminates.” Adv. Cem. Res. 1 (4): 243–248. https://doi.org/10.1680/adcr.1988.1.4.243.
Christensen, A. N., T. R. Jensen, N. V. Y. Scarlett, I. C. Madsen, and J. C. Hanson. 2004. “Hydrolysis of pure and sodium substituted calcium aluminates and cement clinker components investigated by in situ synchrotron X-ray powder diffraction.” J. Am. Ceram. Soc. 87 (8): 1488–1493. https://doi.org/10.1111/j.1551-2916.2004.01488.x.
Colville, A., and S. Geller. 1971. “The crystal structure of brownmillerite, .” Acta Crystallogr. Sect. B 27 (12): 2311–2315. https://doi.org/10.1107/S056774087100579X.
Conjeaud, M., and H. Boyer. 1980. “Some possibilities of Raman microprobe in cement chemistry.” Cem. Concr. Res. 10 (1): 61–70. https://doi.org/10.1016/0008-8846(80)90052-6.
de la Torre, Á. G., S. Bruque, J. Campo, and M. A. G. Aranda. 2002. “The superstructure of from synchrotron and neutron powder diffraction and its role in quantitative phase analyses.” Cem. Concr. Res. 32 (9): 1347–1356. https://doi.org/10.1016/S0008-8846(02)00796-2.
Deng, C. S., C. Breen, J. Yarwood, S. Habesch, J. Phipps, B. Craster, and G. J. Maitland. 2002. “Ageing of oil field cement at high humidity: A combined FEG-ESEM and Raman microscopic investigation.” J. Mater. Chem. 12 (10): 3105–3112. https://doi.org/10.1039/b203127m.
Dubina, E., L. Black, J. Plank, and L. Wadsö. 2014. “Impact of environmental moisture on .” Adv. Cem. Res. 26 (1): 29–40. https://doi.org/10.1680/adcr.12.00062.
Dubina, E., J. Plank, and L. Black. 2015. “Impact of water vapour and carbon dioxide on surface composition of polymorphs studied by X-ray photoelectron spectroscopy.” Cem. Concr. Res. 73 (Jul): 36–41. https://doi.org/10.1016/j.cemconres.2015.02.026.
Dyer, C. D., P. J. Hendra, and W. Forsling. 1993. “The Raman spectroscopy of cement minerals under 1064 nm excitation.” Spectrochim. Acta Part A 49 (5–6): 715–722. https://doi.org/10.1016/0584-8539(93)80094-Q.
Glasser, F. P., and M. B. Marinho. 1984. “Early stages of the hydration of tricalcium aluminate and its sodium-containing solid solutions.” Proc. Br. Ceram. Soc. 35: 221–236.
Gobbo, L., L. Sant’Agostino, and L. Garcez. 2004. “ polymorphs related to industrial clinker alkalies content.” Cem. Concr. Res. 34 (4): 657–664. https://doi.org/10.1016/j.cemconres.2003.10.020.
Gutteridge, W. A. 1979. “On the dissolution of the interstitial phases in Portland cement.” Cem. Concr. Res. 9 (3): 319–324. https://doi.org/10.1016/0008-8846(79)90124-8.
Juenger, M. C. G., and H. M. Jennings. 2001. “Effects of high alkalinity on cement pastes.” ACI Mater. J. 98 (3): 251–255.
Kirchheim, A. P., D. C. Dal Molin, P. Fischer, A.-H. Emwas, J. L. Provis, and P. J. M. Monteiro. 2011. “Real-time high-resolution X-ray imaging and nuclear magnetic resonance study of the hydration of pure and Na-doped in the presence of sulfates.” Inorg. Chem. 50 (4): 1203–1212. https://doi.org/10.1021/ic101460z.
Kirchheim, A. P., V. Fernàndez-Altable, P. J. M. Monteiro, D. C. C. Dal Molin, and I. Casanova. 2009. “Analysis of cubic and orthorhombic hydration in presence of gypsum and lime.” J. Mater. Sci. 44 (8): 2038–2045. https://doi.org/10.1007/s10853-009-3292-3.
Martínez-Ramírez, S., M. Frías, and C. Domingo. 2006. “Micro-Raman spectroscopy in white portland cement hydration: Long-term study at room temperature.” J. Raman Spectrosc. 37 (5): 555–561. https://doi.org/10.1002/jrs.1428.
Mortureux, B., H. Hornain, and P. M. Regourd. 1980. “Role of in the attack on cements by sulfate solutions.” In Proc., 7th Int. Congress on the Chemistry of Cement. Paris.
Myers, R. J., G. Geng, E. D. Rodríguez, P. da Rosa, A. P. Kirchheim, and P. J. M. Monteiro. 2017. “Solution chemistry of cubic and orthorhombic tricalcium aluminate hydration.” Cem. Concr. Res. 100 (Oct): 176–185. https://doi.org/10.1016/j.cemconres.2017.06.008.
Newman, S. P. 2005. “Anomalous fluorescence in near-infrared Raman spectroscopy of cementitious materials.” Cem. Concr. Res. 35 (8): 1620–1628. https://doi.org/10.1016/j.cemconres.2004.10.001.
Odler, I. 1998. “Hydration, setting and hardening of portland cement.” In Lea’s chemistry of cement and concrete, edited by P. Hewlett and M. Liska, 4th ed., 241–297. Oxford, UK: Butterworth-Heinemann.
Odler, I., and R. Wonneman. 1983. “Effect of alkalies on portland cement hydration: I. Alkali oxides incorporated into the crystalline lattice of clinker minerals.” Cem. Concr. Res. 13 (4): 477–482. https://doi.org/10.1016/0008-8846(83)90005-4.
OSHA (Occupational Safety and Health Administration). 2012. Comparison of hazard communication requirements. Washington, DC: Office of the Federal Register.
Ostrowski, C., and J. Żelazny. 2004. “Solid solutions of calcium aluminates and CA with sodium oxide.” J. Therm. Anal. Calorim. 75 (3): 867–885. https://doi.org/10.1023/B:JTAN.0000027182.40442.fe.
Pauri, M., and M. Collepardi. 1987. “The effect of ethanolamines on the hydration in the presence of gypsum.” Il Cemento 2: 131–140.
Plowman, C., and J. G. Cabrera. 1984. “Mechanism and kinetics of hydration of and . Extracted from cement.” Cem. Concr. Res. 14 (2): 238–248. https://doi.org/10.1016/0008-8846(84)90110-8.
Post, J. E., and D. L. Bish. 1989. “Rietveld refinement of crystal structures using powder X-ray diffraction data.” In Vol. 20 of Modern powder diffraction: Reviews in mineralogy and geochemistry, 277–308. Berlin: de Gruyter.
Puligilla, S., and P. Mondal. 2015. “Co-existence of aluminosilicate and calcium silicate gel characterized through selective dissolution and FTIR spectral subtraction.” Cem. Concr. Res. 70 (Apr): 39–49. https://doi.org/10.1016/j.cemconres.2015.01.006.
Quennoz, A., and K. L. Scrivener. 2013. “Interactions between alite and -gypsum hydrations in model cements.” Cem. Concr. Res. 44 (Feb): 46–54. https://doi.org/10.1016/j.cemconres.2012.10.018.
Rheinheimer, V., S. Chae, G. Geng, P. Monteiro, A. Kirchheim, and E. Rodríguez. 2016. “A scanning transmission X-ray microscopy study of cubic and orthorhombic and their hydration products in the presence of gypsum.” Materials 9 (9): 745. https://doi.org/10.3390/ma9090745.
Rietveld, H. M. 1969. “A profile refinement method for nuclear and magnetic structures.” J. Appl. Crystallogr. 2 (2): 65–71. https://doi.org/10.1107/S0021889869006558.
Samet, B., and S. L. Sarkar. 1997. “The influence of calcium sulfate form on the initial hydration of clinkers containing different alkali combinations.” Cem. Concr. Res. 27 (3): 369–380. https://doi.org/10.1016/S0008-8846(97)00030-6.
Scrivener, K., R. Snellings, and B. Lothenbach. 2016. A practical guide to microstructural analysis of cementitious materials. Boca Raton, FL: CRC Press.
Stephan, D., and S. Wistuba. 2006. “Crystal structure refinement and hydration behaviour of doped tricalcium aluminate.” Cem. Concr. Res. 36 (11): 2011–2020. https://doi.org/10.1016/j.cemconres.2006.06.001.
Takeuchi, Y., F. Nishi, and I. Maki. 1980. “Crystal-chemical characterization of the solid-solution series.” Z. Kristallogr. 152 (1–4): 259–307. https://doi.org/10.1524/zkri.1980.152.14.259.
Taylor, H. F. W. 1997. Cement chemistry. London: Thomas Telford Publishing.
Tsirel’son, V. G., A. S. Avilov, Y. A. Abramov, E. L. Belokoneva, R. Kitaneh, and D. Feil. 1998. “X-ray and electron diffraction study of MgO.” Acta Crystallogr. Sect. B 54 (1): 8–17. https://doi.org/10.1107/S0108768197008963.
Wistuba, S., D. Stephan, G. Raudaschl-Sieber, and J. Plank. 2007. “Hydration and hydration products of two-phase Portland cement clinker doped with .” Adv. Cem. Res. 19 (3): 125–131. https://doi.org/10.1680/adcr.2007.19.3.125.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 17, 2018
Accepted: Jun 14, 2019
Published online: Oct 25, 2019
Published in print: Jan 1, 2020
Discussion open until: Mar 25, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.