Review of Techniques, Approaches and Criteria of Hot-Mix Asphalt Fatigue
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 12
Abstract
Fatigue cracks were observed in the 1800s in steel structures—bridge and railroad—in Europe because of cyclic loading; since then, fatigue has been extensively studied in various fields. Several techniques, approaches, and criteria were developed to achieve this purpose. The first fatigue study on hot mix asphalt (HMA) was performed at Nottingham University in the 1950s; since then, a massive amount of work has been done. This paper provides a review survey of fatigue studies of asphalt mixtures; this survey includes demonstrating fatigue test techniques, test modes, load configurations, approaches, and criteria. These approaches range from simple, such as the traditional approach, to complex, such as the mechanistic approach, and can be used in evaluating the fatigue performance of asphalt binders and mixtures, except for the linear amplitude sweep (LAS) test, which is used only for binder and mastic. A French approach was developed to depict asphalt fatigue performance only from a pure fatigue damage perspective without due regard to other artifacts that occur during the fatigue damage process.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. 2002. Method for determining the fatigue life of compacted hot mix asphalt (HMA) subjected to repeated flextural bending. AASHTO TP 8-94. Washington, DC: AASHTO.
AASHTO. 2012. Estimating damage tolerance of asphalt binders using the linear amplitude sweep. AASHTO TP-101-14. Washington, DC: AASHTO.
Ahmed, T. 2016a. Asphalt fatigue failure analysis and modelling: Experimental studies and theoretical formulation. Liverpool, UK: Univ. of Liverpool.
Ahmed, T. M. 2016b. “Fatigue performance of hot mix asphalt tested in controlled stress mode using dynamic shear rheometer.” Int. J. Pavement Eng. 20 (3): 255–265. https://doi.org/10.1080/10298436.2016.1172707.
Ahmed, T. M. 2016c. “Modelling the hysteresis loops of hot mix asphalt.” In Proc., 8th RILEM Int. Conf. on Mechanisms of Cracking and Debonding in Pavements, 25–32. Berlin: Springer.
Ahmed, T. M., T. Y. Ahmed, and A. Al-Hdabi. 2018. “Evaluating fatigue performance of hot-mix asphalt using degradation parameters.” Proc. Inst. Civ. Eng. Constr. Mater. 11 (Jun): 1–12. https://doi.org/10.1680/jcoma.17.00066.
Ahmed, T. M., and H. Al-Khalid. 2016. “A simple fracture model for hot mix asphalt based on fundamental fatigue parameters.” In Proc., 8th RILEM Int. Conf. on Mechanisms of Cracking and Debonding in Pavements, 163–169. Berlin: Springer. https://doi.org/10.1007/978-94-024-0867-6_23.
Ahmed, T. M., P. L. Green, and H. A. Khalid. 2017. “Predicting fatigue performance of hot mix asphalt using artificial neural networks.” Road Mater. Pavement Des. 18 (2): 141–154. https://doi.org/10.1080/14680629.2017.1306928.
Ahmed, T. M., and H. A. Khalid. 2015. “A new approach in fatigue testing and evaluation of hot mix asphalt using a dynamic shear rheometer.” In Proc., 6th Int. Conf. on Bituminous Mixtures and Pavements, 351–359. London: Taylor & Francis.
Airey, G. D., B. Rahimzadeh, and A. C. Collop. 2003. “Viscoelastic linearity limits for bituminous materials.” Mater. Struct. 36 (10): 643–647. https://doi.org/10.1007/BF02479495.
Aliha, M., H. Fazaeli, S. Aghajani, and F. M. Nejad. 2015. “Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures.” Constr. Build. Mater. 95 (Oct): 545–555. https://doi.org/10.1016/j.conbuildmat.2015.07.165.
Aliha, M. M., H. Behbahani, H. Fazaeli, and M. Rezaifar. 2014. “Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures.” Constr. Build. Mater. 54 (Mar): 623–635. https://doi.org/10.1016/j.conbuildmat.2013.12.097.
Al-Khateeb, G., and A. Shenoy. 2004. “A distinctive fatigue failure criterion.” J. Assoc. Asphalt Paving Technol. 73: 585–622.
Ameri, M., S. Nowbakht, M. Molayem, and M. H. Mirabimoghaddam. 2016. “A study on fatigue modeling of hot mix asphalt mixtures based on the viscoelastic continuum damage properties of asphalt binder.” Constr. Build. Mater. 106 (Mar): 243–252. https://doi.org/10.1016/j.conbuildmat.2015.12.066.
Anderson, T. L. 1995. Fracture mechanics, fundamentals and applications. 2nd ed. Cambridge, UK: Cambridge University Press.
Apostolidis, P., C. Kasbergen, A. Bhasin, A. Scarpas, and S. Erkens. 2018. “Study of Asphalt binder fatigue with a new dynamic shear rheometer geometry.” Transp. Res. Rec. 2672 (28): 290–300. https://doi.org/10.1177/0361198118781378.
Artamendi, I. 2004. “Fracture mechanics analysis of crumb rubber modified asphalt produced by the wet process.” Int. J. Pavements 3 (3). 27–38.
Artamendi, I., and H. Khalid. 2005. “Characterization of fatigue damage for paving asphaltic materials.” Fatigue Fract. Eng. Mater. Struct. 28 (12): 1113–1118. https://doi.org/10.1111/j.1460-2695.2005.00949.x.
Artamendi, I., and H. A. Khalid. 2011. “A comparison between beam and semi-circular bending fracture tests for asphalt.” Road Mater. Pavement Des. 7 (1): 163–180. https://doi.org/10.1080/14680629.2006.9690063.
Asgharzadeh, S. M., J. Sadeghi, P. Peivast, and M. Pedram. 2018. “Fatigue properties of crumb rubber asphalt mixtures used in railways.” Constr. Build. Mater. 184 (Sep): 248–257. https://doi.org/10.1016/j.conbuildmat.2018.06.189.
ASTM. 2008. Standard test method for determining fatigue failure of compacted asphalt concrete subjected to repeated flextural bending. ASTM D7460. West Conshohocken, PA: ASTM.
Baaj, H., H. Di Benedetto, and P. Chaverot. 2003. “Fatigue of mixes: An intrinsic damage approach.” In Proc., 6th RILEM Symp. PTEBM, 394–400. Bagneux, France: RILEM Publications.
Baaj, H., H. Di Benedetto, and P. Chaverot. 2005. “Effect of binder characteristics on fatigue of asphalt pavement using an intrinsic damage approach.” Road Mater. Pavement Des. 6 (2): 147–174. https://doi.org/10.1080/14680629.2005.9690003.
Baglieri, O., L. Tsantilis, and E. Santagata. 2018. “Evaluation of healing potential of bituminous binders using a viscoelastic continuum damage approach.” Constr. Build. Mater. 184 (Sep): 344–350. https://doi.org/10.1016/j.conbuildmat.2018.05.228.
Bhasin, A., V. T. Castelo Branco, E. Masad, and D. N. Little. 2009. “Quantitative comparison of energy methods to characterize fatigue in asphalt materials.” J. Mater. Civ. Eng. 21 (2): 83–92. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:2(83).
Bhattacharjee, S., A. K. Swamy, and J. S. Daniel. 2009. “Application of elastic-viscoelastic correspondence principle to determine fatigue endurance limit of hot-mix asphalt.” Transp. Res. Rec. 2126 (1): 12–18. https://doi.org/10.3141/2126-02.
Braham, A., and B. Underwood. 2016. Vol. 85 of State of the art and practice in fatigue cracking evaluation of asphalt concrete pavements. Lino Lakes, MN: Association of Asphalt Paving Technology.
Branco, V. T. F. 2008. “A unified method for the analysis of nonlinear viscoelasticity and fatigue cracking of asphalt mixture using the dynamic mechanical analyzer.” Ph.D. dissertation, Dept. of Civil Engineering, Texas A&M Univ.
Brown, S. 1995. “Practical test procedures for mechanical properties of bituminous materials.” Proc. Inst. Civ. Eng. Transp. 111 (4): 289–297. https://doi.org/10.1680/itran.1995.28031.
BSI (British Standard Institution). 2012a. Bituminous mixtures—Test methods for hot mix asphalt. BS EN 12697-26. London: BSI.
BSI (British Standard Institution). 2012b. Bituminous mixtures—Test methods for hot mix asphalt. BS. 12697-24. London: BSI.
Cao, W., L. Mohammad, and P. Barghabany. 2018. “Use of indirect tension test and viscoelastic continuum damage theory for fatigue characterization of asphalt mixtures.” Constr. Build. Mater. 187 (Oct): 38–49. https://doi.org/10.1016/j.conbuildmat.2018.07.191.
Carpenter, S. H., and S. Shen. 2006. “Dissipated energy approach to study hot-mix asphalt healing in fatigue.” Transp. Res. Rec. 1970 (1): 178–185. https://doi.org/10.1177/0361198106197000119.
Castelo Branco, V., E. Masad, A. Bhasin, and D. Little. 2008. “Fatigue analysis of asphalt mixtures independent of mode of loading.” Transp. Res. Rec. 2057 (1): 149–156. https://doi.org/10.3141/2057-18.
Chehab, G., Y. Kim, R. Schapery, M. Witczak, and R. Bonaquist. 2002. “Time-temperature superposition principle for asphalt concrete with growing damage in tension state.” J. Assoc. Asphalt Paving Technol. 71: 559–593.
Christensen, D. W. Jr, and R. Bonaquist. 2005. “Practical application of continuum damage theory to fatigue phenomena in asphalt concrete mixtures (with discussion and closure).” J. Assoc. Asphalt Paving Technol. 74: 952–991.
Cocurullo, A., G. Airey, A. Collop, and C. Sangiorgi. 2008. “Indirect tensile versus two-point bending fatigue testing.” Proc. ICE-Transp. 161 (4): 207–220. https://doi.org/10.1680/tran.2008.161.4.207.
Daniel, J. S. 2001. “Development of a simplified fatigue test and analysis procedure using a viscoelastic, continuum damage model and its implementation to WesTrack mixtures.” Ph.D. thesis, Dept. of. of Civil Engineering, North Carolina State Univ.
Daniel, J. S., W. Bisirri, and Y. R. Kim. 2004. “Fatigue evaluation of asphalt mixtures using dissipated energy and viscoelastic continuum damage approaches.” J. Assoc. Asphalt Paving Technol. 73: 557–583.
Das, A. K., and D. Singh. 2018. “Effects of regular and nano sized hydrated lime fillers on fatigue and bond strength behavior of asphalt mastic.” Transp. Res. Rec. 2672 (28): 31–41. https://doi.org/10.1177/0361198118759064.
De Al Babadopulos, L. F., J. B. Soares, J. L. S. Ferreira, and L. A. H. Do Nascimento. 2018. “Fatigue cracking simulation of aged asphalt pavements using a viscoelastic continuum damage model.” Road Mater. Pavement Des. 19 (3): 546–560. https://doi.org/10.1080/14680629.2018.1418715.
Delaporte, B., J. Van Rompu, H. Di Benedetto, P. Chaverot, and G. Gauthier. 2008. “New procedure to evaluate fatigue of bituminous mastics using an annular shear rheometer prototype.” Pavement Cracking: Mech. Model. Detect. Test. Case Histories 12 (Jun): 457–467.
Di Benedetto, H., A. Ashayer Soltani, and P. Chaverot. 1996. “Fatigue damage for bituminous mixtures: A pertinent approach.” J. Assoc. Asphalt Paving Technol. 65: 142–158.
Di Benedetto, H., C. De La Roche, H. Baaj, A. Pronk, and R. Lundstrom. 2003. “Fatigue of bituminous mixtures: Different approaches and RILEM group contribution.” In Proc., 6th Int. RILEM Symp. on Performance Testing and Evaluation of Bituminous Materials, 15–38. Paris: RILEM Publications.
Di Benedetto, H., C. De La Roche, H. Baaj, A. Pronk, and R. Lundström. 2004. “Fatigue of bituminous mixtures.” Mater. Struct. 37 (3): 202–216. https://doi.org/10.1007/BF02481620.
Di Benedetto, H., Q. T. Nguyen, and C. Sauzéat. 2011. “Nonlinearity, heating, fatigue and thixotropy during cyclic loading of asphalt mixtures.” Road Mater. Pavement Des. 12 (1): 129–158. https://doi.org/10.1080/14680629.2011.9690356.
Dondi, G., M. Pettinari, C. Sangiorgi, and S. E. Zoorob. 2013. “Traditional and dissipated energy approaches to compare the 2PB and 4PB flexural methodologies on a warm mix asphalt.” Constr. Build. Mater. 47 (Oct): 833–839. https://doi.org/10.1016/j.conbuildmat.2013.05.091.
Dondi, G., V. Vignali, M. Pettinari, F. Mazzotta, A. Simone, and C. Sangiorgi. 2014. “Modeling the DSR complex shear modulus of asphalt binder using 3D discrete element approach.” Constr. Build. Mater. 54 (Mar): 236–246. https://doi.org/10.1016/j.conbuildmat.2013.12.005.
Freire, R. 2015. “Evaluation of the coarse aggregate influence in the fatigue damage using fine aggregate matrices with different maximum nominal sizes.” Ph.D. dissertation, Dept. of Transportation Engineering, Universidade Federal do Ceará.
Gauthier, G., and D. A. Anderson. 2006. “Fracture mechanics and asphalt binders.” Road Mater. Pavement Des. 7 (1): 9–35. https://doi.org/10.1080/14680629.2006.9690056.
Ge, D., Z. You, S. Chen, and L. You. 2017. “Using DSR and FTIR to evaluate asphalt binder extracted and recovered from asphalt mixtures.” In Congress on Technical Advancement, 89–105. Reston, VA: ASCE. https://doi.org/10.1061/9780784481035.009.
Ghuzlan, K. A., and S. H. Carpenter. 2000. “Energy-derived, damage-based failure criterion for fatigue testing.” Transp. Res. Rec. 1723 (1): 141–149. https://doi.org/10.3141/1723-18.
Ghuzlan, K. A., and S. H. Carpenter. 2006. “Fatigue damage analysis in asphalt concrete mixtures using the dissipated energy approach.” Can. J. Civ. Eng. 33 (7): 890–901. https://10.1139/L06-032.
Hartman, A. M. 2000. An experimental Investigation into the mechanical performance and structural integrity of bituminous road pavement mixtures under the action of fatigue load conditions. Dublin, Ireland: Univ. College Dublin.
Hartman, A. M., and M. Gilchrist. 2004. “Evaluating four-point bend fatigue of asphalt mix using image analysis.” J. Mater. Civ. Eng. 16 (1): 60–68. https://doi.org/10.1061/(ASCE)0899-1561.
Hintz, C., and H. Bahia. 2013. “Simplification of linear amplitude sweep test and specification parameter.” Transp. Res. Rec. 2370 (1): 10–16. https://doi.org/10.3141/2370-02.
Hintz, C., R. Velasquez, C. Johnson, and H. Bahia. 2011. “Modification and validation of linear amplitude sweep test for binder fatigue specification.” Transp. Res. Rec. 2207 (1): 99–106. https://doi.org/10.3141/2207-13.
Hopman, P., P. Kunst, and A. Pronk. 1989. “A renewed interpretation method for fatigue measurements-verification of Miner’s rule.” In Proc., 4th Eurobitume Symp, 557–561. Brussels, Belgium: European Bitumen Association.
Hou, Y., P. Yue, Q. Xin, T. Pauli, W. Sun, and L. Wang. 2014. “Fracture failure of asphalt binder in mixed mode (Modes I and II) by using phase-field model.” Road Mater. Pavement Des. 15 (1): 167–181. https://doi.org/10.1080/14680629.2013.866155.
Huang, C. W., E. Masad, A. H. Muliana, and H. Bahia. 2007. “Nonlinearly viscoelastic analysis of asphalt mixes subjected to shear loading.” Mech. Time-Depend. Mater. 11 (2): 91–110. https://doi.org/10.1007/s11043-007-9034-5.
Hudson, W. R., and T. W. Kennedy. 1968. An indirect tensile test for stabilized materials. Austin, TX: Univ. of Texas at Austin.
Johnson, C., and H. U. Bahia. Forthcoming. “Evaluation of an accelerated procedure for fatigue characterization of asphalt binders.” Road Mater. Pavement Des.
Johnson, C. M. 2010. “Estimating asphalt binder fatigue resistance using an accelerated test method.” PhD dissertation, Dept. of Civil and Environmental Engineering, Univ. of Wisconsin-Madison.
Johnson, C. M., H. U. Bahia, and H. Wen. 2009. “Practical application of viscoelastic continuum damage theory to asphalt binder fatigue characterization.” J. Assoc. Asphalt Paving Technol. 28: 597.
Kachanov, L. 1958. “On time to rupture in creep conditions.” Izvestiya Akademii Nauk SSSR Otdelenie Tekniches 81Izv. AN SSSR 26–31.
Kataware, A. V., and D. Singh. 2018. “Evaluation of intermediate temperature cracking performance of warm mix additive modified asphalt binders.” Constr. Build. Mater. 184 (Sep): 165–176. https://doi.org/10.1016/j.conbuildmat.2018.06.227.
Khalid, H., and M. M. Hassan. 2011. “Cracking of asphalt mixtures containing bottom ash waste linked to visco-elastic damage mechanics analysis.” In Proc., 5th Int. Conf. Bituminous Mixtures and Pavements. London: Taylor & Francis.
Khiavi, A. K., and M. Ameri. 2014. “Investigating the fatigue endurance limit of HMA mixture using RDEC approach.” Constr. Build. Mater. 55 (Mar): 97–102. https://doi.org/10.1016/j.conbuildmat.2014.01.013.
Kim, Y. R., H. J. Lee, and D. N. Little. 1997. “Fatigue characterization of asphalt concrete using viscoelasticity and continuum damage theory (with discussion).” J. Assoc. Asphalt Paving Technol. 66: 520–569.
Kim, Y. R., D. Little, and R. Lytton. 2002. “Use of dynamic mechanical analysis (DMA) to evaluate the fatigue and healing potential of asphalt binders in sand asphalt mixtures.” J. Assoc. Asphalt Paving Technol. 71: 176–205.
Kim, Y. R., and D. N. Little. 1990. “One-dimensional constitutive modeling of asphalt concrete.” J. Eng. Mech. 116 (4): 751–772. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:4(751).
Kim, Y. R., and D. N. Little. 2004. “Linear viscoelastic analysis of asphalt mastics.” J. Mater. Civ. Eng. 16 (2): 122–132. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:2(122).
Kim, Y. R., D. N. Little, and R. C. Burghardt. 1991. “SEM analysis on fracture and healing of sand-asphalt mixtures.” J. Mater. Civ. Eng. 3 (2): 140–153. https://doi.org/10.1061/(ASCE)0899-1561(1991)3:2(140).
Kim, Y. R., D. N. Little, and R. L. Lytton. 2003. “Fatigue and healing characterization of asphalt mixtures.” J. Mater. Civ. Eng. 15 (1): 75–83. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(75).
Kutay, M. E., N. Gibson, and J. Youtcheff. 2008. “Conventional and viscoelastic continuum damage (VECD)-based fatigue analysis of polymer modified asphalt pavements (with discussion).” J. Assoc. Asphalt Paving Technol. 77: 395–435.
Lee, H. J., J. S. Daniel, and Y. R. Kim. 2000. “Continuum damage mechanics-based fatigue model of asphalt concrete.” J. Mater. Civ. Eng. 12 (2): 105–112. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(105).
Lee, H. J., Y. R. Kim, and S. W. Lee. 2003. “Prediction of asphalt mix fatigue life with viscoelastic material properties.” Transp. Res. Rec. 1832 (1): 139–147. https://doi.org/10.3141/1832-17.
Li, X., and M. O. Marasteanu. 2006. “The role of temperature and binder type on the fracture resistance of asphalt mixtures at low temperatures.” Road Mater. Pavement Des. 7 (3): 331–348. https://doi.org/10.1080/14680629.2006.9690041.
Little, D. N., R. L. Lytton, D. Williams, and Y. R. Kim. 1999. “An analysis of mechanism of microdamage healing based on the applications of micromechanics first principles of fracture and healing.” In Vol. 68 of Proc., Association of Asphalt Paving Technologists, 501–541. Lino Lakes, MN: The Association of Asphalt Paving Technologists.
Liu, G., Y. Jia, T. Yang, H. Du, J. Zhang, and Y. Zhao. 2017. “Fatigue performance evaluation of asphalt mixtures based on energy-controlled loading mode.” Constr. Build. Mater. 157 (Dec): 348–356. https://doi.org/10.1016/j.conbuildmat.2017.09.108.
Lundstrom, R., and U. Isacsson. 2004. “An investigation of the applicability of Schapery’s work potential model for characterization of asphalt fatigue behavior.” J. Assoc. Asphalt Paving Technol. 73 (Mar): 657–694.
Luo, X. 2013. “Characterization of fatigue cracking and healing of asphalt mixtures.” Ph.D. thesis, Dept. of Civil Engineering, Texas A&M Univ.
Luo, X., R. Luo, and R. Lytton. 2012. “Characterization of fatigue damage in asphalt mixtures using pseudostrain energy.” J. Mater. Civ. Eng. 25 (2): 208–218. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000633.
Luo, X., R. Luo, and R. L. Lytton. 2013. “A modified Paris’s law to predict entire crack growth in asphalt mixtures.” Transp. Res. Rec. 2373 (1): 54–62. https://doi.org/10.3141/2373-06.
Maggiore, C., G. Airey, G. Di Mino, P. Marsac, A. Collop, and M. Di Liberto. 2012. “Fatigue resistance: Is it possible having a unique response?” In Proc., 3rd Four Point Bending Conf., IFSTTAR, 239. Boca Raton, FL: CRC Press.
Malvern. 2018. “Kinexus Series.” Accessed April 12, 2018. http://www.malvern.com/labeng/products/kinexus.
Mamlouk, M., M. Souliman, and W. Zeiada. 2012. “Optimum testing conditions to measure HMA fatigue and healing using flexural bending test.” In Proc., 91st Annual Meeting. Washington, DC: Transportation Research Board.
Mansourian, A., A. Razmi, and M. Razavi. 2016. “Evaluation of fracture resistance of warm mix asphalt containing jute fibers.” Constr. Build. Mater. 117 (Aug): 37–46. https://doi.org/10.1016/j.conbuildmat.2016.04.128.
Masad, E., V. T. F. Castelo Branco, D. N. Little, and R. Lytton. 2008a. “A unified method for the analysis of controlled-strain and controlled-stress fatigue testing.” Int. J. Pavement Eng. 9 (4): 233–246. https://doi.org/10.1080/10298430701551219.
Masad, E., C.-W. Huang, G. Airey, and A. Muliana. 2008b. “Nonlinear viscoelastic analysis of unaged and aged asphalt binders.” Constr. Build. Mater. 22 (11): 2170–2179. https://doi.org/10.1016/j.conbuildmat.2007.08.012.
Menard, K. P., and B. W. Bilyeu. 2006. Dynamic mechanical analysis of polymers and rubbers. Hoboken, NJ: Wiley.
Menrad, K. 2008. Dynamic mechanical analysis: A practical introduction. Boca Raton, FL: CRC Press.
Miglietta, F., B. S. Underwood, L. Tsantilis, O. Baglieri, K. E. Kaloush, and E. Santagata. 2018. “Fatigue properties of nano-reinforced bituminous mixtures: A viscoelastic continuum damage approach.” Int. J. Pavement Res. Technol. https://doi.org/10.1016/j.ijprt.2018.04.004.
Molenaar, A., A. Scarpas, X. Liu, and S. Erkens. 2002. “Semi-circular bending test: Simple but useful?” J. Assoc. Asphalt Paving Technol. 71: 794–815.
Molenaar, J., and A. Molenaar. 2000. “Fracture toughness of asphalt in the semi-circular bend test.” In Proc., Review at 2nd Eurasphalt and Eurobitume Congress, 509–517. Wokingham, UK: Transport Research Laboratory.
Monismith, C. L., D. Kasianchuk, and J. Epps. 1967. Asphalt mixture behavior in repeated flexure: A study of an in-service pavement near Morro Bay, California. Berkeley, CA: Univ. of California.
Monismith, C. L., and D. B. McLean. 1972. Technology of thick list construction: Structural design considerations. Proc. Assoc. Asphalt Paving Technol. 41: 258–304.
Monney, O. K., H. A. Khalid, and I. Artamendi. 2007. “Assessment of fracture properties of emulsified asphalt mixtures.” Road Mater. Pavement Des. 8 (1): 87–102. https://doi.org/10.1080/14680629.2007.9690068.
Mull, M., K. Stuart, and A. Yehia. 2002. “Fracture resistance characterization of chemically modified crumb rubber asphalt pavement.” J. Mater. Sci. 37 (3): 557–566. https://doi.org/10.1023/A:1013721708572.
Mun, S., and H.-J. Lee. 2010. “Modeling viscoelastic crack growth in hot-mix asphalt concrete mixtures using a disk-shaped compact tension test.” J. Eng. Mech. 137 (6): 431–438. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000245.
Mun, S., and S. Lee. 2012. “Fatigue resistance potential for hot mix asphalt using viscoelastic continuum damage analysis.” Fatigue Fract. Eng. Mater. Struct. 35 (3): 205–218. https://doi.org/10.1111/j.1460-2695.2011.01607.x.
Ng, A. K. Y., A. B. Klug, A. L. Faxina, and A. Bhasin. 2017. “Evaluation of the fatigue damage behavior of fine aggregate matrices prepared with modified binders using the VECD theory.” In Proc., 97th Annual Meeting. Washington, DC: Transportation Research Board.
Nishizawa, T., S. Shimeno, and M. Sekiguchi. 1997. “Fatigue analysis of asphalt pavements with thick asphalt mixture layer.” In Proc., 8th Int. Conf. on Asphalt Pavements Federal Highway Administration. Washington, DC: Asphalt Pavements Federal Highway Administration.
Norouzi, A., M. Sabouri, and Y. Richard Kim. 2017. “Fatigue life and endurance limit prediction of asphalt mixtures using energy-based failure criterion.” Int. J. Pavement Eng. 18 (11): 990–1003. https://doi.org/10.1080/10298436.2016.1141352.
Notani, M. A., F. Moghadas Nejad, A. Khodaii, and P. Hajikarimi. 2018. “Evaluating fatigue resistance of toner-modified asphalt binders using the linear amplitude sweep test.” Road Mater. Pavement Des. 1–14. https://doi.org/10.1080/14680629.2018.1474792.
Paris, P., and F. Erdogan. 1963. “A critical analysis of crack propagation laws.” J. Basic Eng. 85 (4): 528–533. https://doi.org/10.1115/1.3656900.
Park, S. W., Y. R. Kim, and R. A. Schapery. 1996. “A viscoelastic continuum damage model and its application to uniaxial behavior of asphalt concrete.” Mech. Mater. 24 (4): 241–255. https://doi.org/10.1016/S0167-6636(96)00042-7.
Partl, M. N., H. U. Bahia, F. Canestrari, C. De La Roche, H. Di Benedetto, H. Piber, and D. Sybilski. 2012. Advances in interlaboratory testing and evaluation of bituminous materials: State-of-the-art report of the RILEM technical committee 206-ATB. Berlin: Springer.
Partl, M. N., and S. Hean. 1996. “Evaluation of mechanical tests for polymer-bitumen.” In Vol. 3 of Proc., Eurasphalt and Eurobitume Congress, 7–10. Brussels, Belgium: European Asphalt Pavement Association.
Pell, P. 1962. “Fatigue characteristics of bitumen and bituminous mixes.” In Proc., Int. Conf. on the Structural Design of Asphalt Pavements. Washington, DC: National Academy of Sciences.
Pell, P. S. 1973. “Characterization of fatigue behavior.” In Proceedings of a Symposium on Structural Design of Asphalt Concrete Pavements to Prevent Fatigue Cracking, 49–64. Washington, DC: Highway Research Board.
Pronk, A. 1997a. “Fatigue lives of asphalt beams in 2 and 4 point dynamic bending tests based on a ‘new’ fatigue life definition using the dissipated energy concept.” In Controlled displacement mode. The Hague, Netherlands: Ministerie van Verkeer en Waterstaat.
Pronk, A. 1997b. “Fatigue lives of asphalt beams in 2 and 4 point dynamic bending tests based on a ‘new’ fatigue life definition using the dissipated energy concept.” In Controlled force mode. The Hague, Netherlands: Ministerie van Verkeer en Waterstaat.
Pronk, A. C., and S. Erkens. 2002. “A note on fatigue bending tests using a haversine loading.” Road Mater. Pavement Des. 3 (1): 95–106. https://doi.org/10.1080/14680629.2002.9689917.
Pronk, A. C., M. Poot, M. Jacobs, and R. Gelpke. 2010. “Haversine fatigue testing in controlled deflection mode: Is it possible?.” In Proc., 89th Annual Meeting. Washington, DC: Transportation Research Board.
Prowell, B. D., and E. R. Brown. 2006. Methods for determining the endurance limit using beam fatigue tests. In Proc., 1st Int. Conf. on Perpetual Pavement. Washington, DC: The National Cooperative Highway Research Program.
Qian, G.-P., H.-F. Liu, J.-I. Zheng, and L.-J. Jiang. 2013. “Experiment of tension-compression fatigue and damage for asphalt mixtures.” J. Highway Transp. Res. Dev. 7 (2): 15–21. https://doi.org/10.1061/JHTRCQ.0000308.
Reese, R. 1997. “Properties of aged asphalt binder related to asphalt concrete fatigue life.” J. Assoc. Asphalt Paving Technol. 66: 604–632.
Rice, J. R. 1968. “A path independent integral and the approximate analysis of strain concentration by notches and cracks.” J. Appl. Mech. 35 (2): 379–386. https://doi.org/10.1115/1.3601206.
Rowe, G. 1993. “Performance of asphalt mixtures in the trapezoidal fatigue test.” Asphalt Paving Technol. 62: 344.
Rowe, G. M. 1996. “Application of the dissipated energy concept to fatigue cracking in asphalt pavements.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Nottingham.
Rowe, G. M., and M. G. Bouldin. 2000. “Improved techniques to evaluate the fatigue resistance of asphaltic mixtures.” In Vol. 81 of Proc., 2nd Eurasphalt and Eurobitume Congress, 754–763. Barcelona, Spain: Eurasphalt and Eurobitume Congress.
Sabouri, M., and Y. R. Kim. 2014. “Development of a failure criterion for asphalt mixtures under different modes of fatigue loading.” Transp. Res. Rec. 2447 (1): 117–125. https://doi.org/10.3141/2447-13.
Sabouri, M., D. Mirzaiyan, and A. Moniri. 2018. “Effectiveness of linear amplitude sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance.” Constr. Build. Mater. 171 (May): 281–290. https://doi.org/10.1016/j.conbuildmat.2018.03.146.
Sadek, H., E. Masad, H. Al-Khalid, and O. Sirin. 2016. “Probabilistic analysis of fatigue life for asphalt mixtures using the viscoelastic continuum damage approach.” Constr. Build. Mater. 126 (Nov): 227–244. https://doi.org/10.1016/j.conbuildmat.2016.09.029.
Safaei, F., and C. Castorena. 2016. “Temperature effects of linear amplitude sweep testing and analysis.” Transp. Res. Rec. 2574 (1): 92–100. https://doi.org/10.3141/2574-10.
Safaei, F., and C. Castorena. 2018. “Improved interpretation of asphalt binder parallel plate dynamic shear rheometer fatigue tests.” Int. J. Pavement Eng. 23 (Feb): 1–14. https://doi.org/10.1080/10298436.2018.1438611.
Schapery, R. 1984. “Correspondence principles and a generalized J integral for large deformation and fracture analysis of viscoelastic media.” Int. J. Fract. 25 (3): 195–223. https://doi.org/10.1007/BF01140837.
Schapery, R. 1990. “A theory of mechanical behavior of elastic media with growing damage and other changes in structure.” J. Mech. Phys. Solids 38 (2): 215–253. https://doi.org/10.1016/0022-5096(90)90035-3.
Shan, L., Y. Tan, B. S. Underwood, and Y. R. Kim. 2011. “Separation of thixotropy from fatigue process of asphalt binder.” Transp. Res. Rec. 2207 (1): 89–98. https://doi.org/10.3141/2207-12.
Shen, S., and S. H. Carpenter. 2005. “Application of the dissipated energy concept in fatigue endurance limit testing.” Transp. Res. Rec. 1929 (1): 165–173. https://doi.org/10.1177/0361198105192900120.
Si, Z., D. Little, and R. Lytton. 2002. “Characterization of microdamage and healing of asphalt concrete mixtures.” J. Mater. Civ. Eng. 14 (6): 461–470. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:6(461).
Singh, D., P. K. Ashish, A. Kataware, and A. Habal. 2017. “Evaluating performance of PPA-and-elvaloy-modified binder containing WMA additives and lime using MSCR and LAS tests.” J. Mater. Civ. Eng. 29 (8): 04017064. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001934.
Soltani, A., and D. A. Anderson. 2005. “New test protocol to measure fatigue damage in asphalt mixtures.” Road Mater. Pavement Des. 6 (4): 485–514. https://doi.org/10.1080/14680629.2005.9690017.
Souliman, M. I., M. Mamlouk, and K. E. Kaloush. 2014. “Preliminary prediction of endurance limit for asphalt rubber mixtures due to healing.” Can. J. Civ. Eng. 41 (11): 964–969. https://doi.org/10.1139/cjce-2013-0505.
Suh, Y., S. Mun, and I. Yeo. 2010. “Fatigue life prediction of asphalt concrete pavement using a harmony search algorithm.” KSCE J. Civ. Eng. 14 (5): 725–730. https://doi.org/10.1007/s12205-010-0906-x.
Sulaiman, S., and A. Stock. 1995. “The use of fracture mechanics for the evaluation of asphalt mixes (with discussion).” J. Assoc. Asphalt Paving Technol. 64: 500–533.
Tayebali, A. A., G. M. Rowe, and J. B. Sousa. 1992. “Fatigue response of asphalt-aggregate mixtures.” J. Assoc. Asphalt Paving Technol. 61: 333–360.
Thom, N. 2008. Principles of pavement engineering. London: Thomas Telford Publishing.
Underwood, B. S., C. Baek, and Y. R. Kim. 2012. “Simplified viscoelastic continuum damage model as platform for asphalt concrete fatigue analysis.” Transp. Res. Rec. 2296 (1): 36–45. https://doi.org/10.3141/2296-04.
Underwood, B. S., Y. R. Kim, M. Guddati, T. Pellinen, W. Rongzong, G. King, R. Kluttz, and N. Gibson. 2006. “Characterization and performance prediction of ALF mixtures using a viscoelastoplastic continuum damage model.” In Proc., Association of Asphalt Paving Technologists Proceedings of the Technical Sessions 2006 Annual Meeting, 577–636. Lino Lakes, MN: The Association of Asphalt Paving Technologists.
Underwood, B. S., Y. R. Kim, and M. N. Guddati. 2010. “Improved calculation method of damage parameter in viscoelastic continuum damage model.” Int. J. Pavement Eng. 11 (6): 459–476. https://doi.org/10.1080/10298430903398088.
Van Dijk, W. 1975. “Practical fatigue characterization of bituminous mixes.” J. Assoc. Asphalt Paving Technol. 44: 38–72.
Van Dijk, W., and W. Visser. 1977. “Energy approach to fatigue for pavement design.” In Vol. 46 of Proc., Association of Asphalt Paving Technology Washington, DC: Transportation Research Board.
Van Rompu, J., H. Di Benedetto, M. Buannic, T. Gallet, and C. Ruot. 2012. “New fatigue test on bituminous binders: Experimental results and modeling.” Constr. Build. Mater. 37 (Dec): 197–208. https://doi.org/10.1016/j.conbuildmat.2012.02.099.
Walubita, L. F., A. E. Martin, G. S. Cleveland, and R. L. Lytton. 2006. “Computation of pseudo strain energy and Paris law fracture coefficients from surface energy and uniaxial strain-controlled tension test data.” Int. J. Pavement Eng. 7 (3): 167–178. https://doi.org/10.1080/10298430500501944.
Wang, C., C. Castorena, J. Zhang, and Y. Richard Kim. 2015. “Unified failure criterion for asphalt binder under cyclic fatigue loading.” Road Mater. Pavement Des. 16 (2): 125–148. https://doi.org/10.1080/14680629.2015.1077010.
Witczak, M., M. Mamlouk, M. Souliman, and W. Zeiada. 2013. Laboratory validation of an endurance limit for asphalt pavements. Washington, DC: AASHTO.
Woldekidan, M., M. Huurman, and A. Pronk. 2013. “Linear and nonlinear viscoelastic analysis of bituminous mortar.” Transp. Res. Rec. 2370 (1): 53–62. https://doi.org/10.3141/2370-07.
Xiao, F., S. Amirkhanian, and C. H. Juang. 2009. “Prediction of fatigue life of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement using artificial neural networks.” J. Mater. Civ. Eng. 21 (6): 253–261. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:6(253).
Xu, G., H. Wang, and H. Zhu. 2017. “Rheological properties and anti-aging performance of asphalt binder modified with wood lignin.” Constr. Build. Mater. 151 (Oct): 801–808. https://doi.org/10.1016/j.conbuildmat.2017.06.151.
Yin, A., X. Yang, S. Yang, and W. Jiang. 2011. “Multiscale fracture simulation of three-point bending asphalt mixture beam considering material heterogeneity.” Eng. Fract. Mech. 78 (12): 2414–2428. https://doi.org/10.1016/j.engfracmech.2011.06.001.
Yu, J., Z. Dai, J. Shen, H. Zhu, and P. Shi. 2018. “Aging of asphalt binders from weathered asphalt mixtures compared with a SHRP process.” Constr. Build. Mater. 160 (Jan): 475–486. https://doi.org/10.1016/j.conbuildmat.2017.11.060.
Yu, J.-M., and G.-L. Zou. 2013. “Asphalt pavement fatigue cracking prediction model with mode factor.” Int. J. Pavement Res. Technol. 6 (2): 123–129. https://doi.org/10.6135/ijprt.org.tw/2013.6(2).123.
Zborowski, A., and K. E. Kaloush. 2011. “A fracture energy approach to model the thermal cracking performance of asphalt rubber mixtures.” Road Mater. Pavement Des. 12 (2): 377–395. https://doi.org/10.1080/14680629.2011.9695250.
Zegeye, E., J.-L. Le, M. Turos, and M. Marasteanu. 2012. “Investigation of size effect in asphalt mixture fracture testing at low temperature.” Road Mater. Pavement Des. 13 (1): 88–101. https://doi.org/10.1080/14680629.2012.657064.
Zeiada, W. A., M. I. Souliman, K. E. Kaloush, and M. Mamlouk. 2013. “Endurance limit for HMA based on healing concept using uniaxial tension-compression fatigue test.” J. Mater. Civ. Eng. 26 (8): 04014036. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000917.
Zeiada, W. A., B. S. Underwood, T. Pourshams, J. Stempihar, and K. E. Kaloush. 2014. “Comparison of conventional, polymer, and rubber asphalt mixtures using viscoelastic continuum damage model.” Road Mater. Pavement Des. 15 (3): 588–605. https://doi.org/10.1080/14680629.2014.914965.
Zhang, J. 2012. “Development of failure criteria for asphalt concrete mixtures under fatigue loading.” M.S. thesis, Dept. of Civil Engineering, North Carolina State Univ.
Zhang, J., M. Sabouri, M. N. Guddati, and Y. R. Kim. 2013. “Development of a failure criterion for asphalt mixtures under fatigue loading.” Road Mater. Pavement Des. 14 (2): 1–15. https://doi.org/10.1080/14680629.2013.812843.
Zhang, L., C. Xing, F. Gao, T.-S. Li, and Y.-Q. Tan. 2016. “Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphalt.” Constr. Build. Mater. 127 (Nov): 466–474. https://doi.org/10.1016/j.conbuildmat.2016.10.010.
Zhao, X., K. Yan, W. He, and C. Cai. 2017. “Effects of Sasobit/Deurex on amorphous poly alpha olefin (APAO) modified asphalt binder.” Constr. Build. Mater. 154 (Nov): 323–330. https://doi.org/10.1016/j.conbuildmat.2017.07.234.
Zhu, H., E. Yan, and Z. Lu. 2017. “Evaluation of fatigue performance of asphalt based on constant strain DSR test.” In Vol. 170 of IOP Conference Series: Materials Science and Engineering. Bristol, UK: IOP Publishing.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 31 • Issue 12 • December 2019
Copyright
©2019 American Society of Civil Engineers.
History
Published online: Sep 28, 2019
Published in print: Dec 1, 2019
Discussion open until: Feb 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.