Influence of PCE on Rheological and Hydration Performances of Cement Paste
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 3
Abstract
The addition of polycarboxylate superplasticizers (PCE) can alter the microstructure of dispersion system, and hence improve the fluidity of cement paste. In this paper, adsorption isotherms of PCE as well as the rheological and the hydration properties of cement paste have been systematically investigated. Cement hydration property was analyzed by isothermal calorimetry, differential thermal analysis (DTA), and thermogravimetric analysis (TG). The pore structures were investigated by mercury intrusion porosimetry (MIP) and dynamic water vapor sorption (DWVS). The microstructure and composition characteristics of hydration products were investigated by scanning electron microscopy (SEM) equipped with secondary electron imaging (SEI), backscattered electron imaging (BSE), and energy dispersive X-ray spectrometer (EDS). The results indicate that a higher PCE dosage leads to an increase of fluidity and a decrease of apparent viscosity as well as yield stress of fresh cement paste, owing to the disassembled flocculation and the released water from flocculation. The adsorption of PCE shows a double-layer adsorption behavior. The first adsorbed layer of PCE attributes to the zeta potential and the fluidity of cement paste, while the second adsorbed layer makes no contribution to these properties. The hydration degree of the cement paste is hindered by the addition of PCE at 1 day, but promoted at 3 days, while the promotion of hydration process almost vanishes at 28 days. The addition of PCE decreases the size of hydration products in hardened cement paste and changes the composition of hydrated calcium silicate (C-S-H) gel. The decreased porosity as well as average pore size due to good dispersion capability of PCE significantly improves the concrete performance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the support of the National Natural Science Foundation of China (51808369), the Natural Science Foundation of the Jiangsu Higher Education Institutions of China (18KJB560016), the Opening Project of State Key Laboratory of Green Building Materials (YA-615), State Key Laboratory of Silicate Building Materials (SYSJJ2018-09), Key Laboratory of High Performance Concrete in Shaanxi Province (SHPC201701), Science and Technology Project of Jiangsu Provincial Department of Housing and Urban-Rural Construction (2018ZD049), and the Natural Science Foundation of Suzhou University of Science and Technology (XKQ2018009).
References
Al-Amoudi, O. S. B., T. O. Abiola, and M. Maslehuddin. 2006. “Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.” Constr. Build. Mater. 20 (9): 642–647. https://doi.org/10.1016/j.conbuildmat.2005.02.024.
Alonso, M. M., M. Palacios, and F. Puertas. 2013. “Compatibility between polycarboxylate-based admixtures and blended-cement pastes.” Cem. Concr. Compos. 35 (1): 151–162. https://doi.org/10.1016/j.cemconcomp.2012.08.020.
Chiang, W. S., E. Fratini, F. Ridi, S. H. Lim, Y. Q. Yeh, P. Baglioni, S. M. Choi, U. S. Jeng, and S. H. Chen. 2013. “Microstructural changes of globules in calcium-silicate-hydrate gels with and without additives determined by small-angle neutron and X-ray scattering.” J Colloid Interface Sci. 398 (May): 67–73. https://doi.org/10.1016/j.jcis.2013.01.065.
Fan, W., F. Stoffelbach, J. Rieger, and L. Regnaud. 2012. “A new class of organosilane-modified polycarboxylate superplasticizers with low sulfate sensitivity.” Cem. Concr. Res. 42 (1): 166–172. https://doi.org/10.1016/j.cemconres.2011.09.006.
Felekoglu, B., and H. Sarikahya. 2008. “Effect of chemical structure of polycarboxylate-based superplasticizers on workability retention of self-compacting concrete.” Constr. Build. Mater. 22 (9): 1972–1980. https://doi.10.1016/j.conbuildmat.2007.07.005.
Flatt, R. J., and Y. F. Houst. 2001. “A simplified view on chemical effects perturbing the action of superplasticizers.” Cem. Concr. Res. 31 (8): 1169–1176. https://doi.org/10.1016/S0008-8846(01)00534-8.
Hanehara, S., and K. Yamada. 1999. “Interaction between cement and chemical admixture from the point of cement hydration, absorption behaviour of admixture, and paste rheology.” Cem. Concr. Res. 29 (8): 1159–1165. https://doi.org/10.1016/S0008-8846(99)00004-6.
He, Y., X. Zhang, and J. Guan. 2016. “Effect and mechanism of sulfates on dispersity of polycarboxylate-type superplasticizers.” KSCE J. Civ. Eng. 21 (6): 2195–2201. https://doi.org/10.1007/s12205-016-0606-2.
He, Y., X. Zhang, and R. D. Hooton. 2017. “Effects of organosilane-modified polycarboxylate superplasticizer on the fluidity and hydration properties of cement paste.” Constr. Build. Mater. 132 (Feb): 112–123. https://doi.org/10.1016/j.conbuildmat.2016.11.122.
He, Y., X. Zhang, L. Shui, Y. Wang, and M. Gu. 2019. “Effects of PCEs with various carboxylic densities and functional groups on the fluidity and hydration performances of cement paste.” Constr. Build. Mater. 202 (Mar): 656–668. https://doi.org/10.1016/j.conbuildmat.2018.12.216.
Hu, C. L. 2014. “Microstructure and mechanical properties of fly ash blended cement pastes.” Constr. Build. Mater. 73 (Dec): 618–625. https://doi.org/10.1016/j.conbuildmat.2014.10.009.
Hu, C. L., and Z. J. Li. 2015. “Property investigation of individual phases in cementitious composites containing silica fume and fly ash.” Cem. Concr. Compos. 57 (Mar): 17–26. https://doi.org/10.1016/j.cemconcomp.2014.11.011.
Hu, C. L., Z. J. Li, Y. Y. Gao, Y. G. Han, and Y. M. Zhang. 2014. “Investigation on microstructures of cementitious composites incorporating slag.” Adv. Cem. Res. 26 (4): 222–232. https://doi.org/10.1680/adcr.13.00029.
Knapen, E., and D. Van Gemert. 2009. “Cement hydration and microstructure formation in the presence of water-soluble polymers.” Cem. Concr. Res. 39 (1): 6–13. https://doi.org/10.1016/j.cemconres.2008.10.003.
Kong, F. R., L. S. Pan, C. M. Wang, D. L. Zhang, and N. Xu. 2016. “Effects of polycarboxylate superplasticizers with different molecular structure on the hydration behavior of cement paste.” Constr. Build. Mater. 105 (Feb) 545–553. https://doi.org/10.1016/j.conbuildmat.2015.12.178.
Kong, X. M., Y. R. Zhang, and S. S. Hou. 2013. “Study on the rheological properties of portland cement pastes with polycarboxylate superplasticizers.” Rheol. Acta 52 (7): 707–718. https://doi.org/10.1007/s00397-013-0713-7.
Kreppelt, F., M. Weibel, D. Zampini, and M. Romer. 2002. “Influence of solution chemistry on the hydration of polished clinker surfaces—A study of different types of polycarboxylic acid-based admixtures.” Cem. Concr. Res. 32 (2): 187–198. https://doi.org/10.1016/S0008-8846(01)00654-8.
Kumar, M., S. K. Singh, and N. P. Singh. 2012. “Heat evolution during the hydration of portland cement in the presence of fly ash, calcium hydroxide and super plasticizer.” Thermochim. Acta 548 (Nov): 27–32. https://doi.org/10.1016/j.tca.2012.08.028.
Lange, A., and J. Plank. 2016. “Contribution of non-adsorbing polymers to cement dispersion.” Cem. Concr. Res. 79 (Jan): 131–136. https://doi.org/10.1016/j.cemconres.2015.09.003.
Liu, M., J. H. Lei, L. P. Guo, X. D. Du, and J. S. Li. 2015. “The application of thermal analysis, XRD and SEM to study the hydration behavior of tricalcium silicate in the presence of a polycarboxylate superplasticizer.” Thermochim. Acta 613 (Aug): 54–60. https://doi.org/10.1016/j.tca.2015.05.020.
Liu, M., H. B. Tan, and X. Y. He. 2019. “Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system.” Constr. Build. Mater. 194 (Jan): 350–359. https://doi.org/10.1016/j.conbuildmat.2018.10.214.
Loukili, A., A. Khelidj, and P. Richard. 1999. “Hydration kinetics, change of relative humidity, and autogenous shrinkage of ultra-high-strength concrete.” Cem. Concr. Res. 29 (4): 577–584. https://doi.org/10.1016/S0008-8846(99)00022-8.
Lv, S. H., H. B. Ju, C. C. Qiu, Y. J. Ma, and Q. F. Zhou. 2013. “Effects of connection mode between carboxyl groups and main chains on polycarboxylate superplasticizer properties.” J. Appl. Polym. Sci. 128 (6): 3925–3932. https://doi.org/10.1002/app.38608.
Ma, B., M. Ma, X. D. Shen, X. R. Li, and X. D. Wu. 2014. “Compatibility between a polycarboxylate superplasticizer and the belite-rich sulfoaluminate cement: Setting time and the hydration properties.” Constr. Build. Mater. 51 (Jan): 47–54. https://doi.org/10.1016/j.conbuildmat.2013.10.028.
Ng, S., E. Metwalli, P. Müller-Buschbaum, and J. Plank. 2013. “Occurrence of intercalation of PCE superplasticizers in calcium aluminate cement under actual application conditions, as evidenced by SAXS analysis.” Cem. Concr. Res. 54 (Dec): 191–198. https://doi.org/10.1016/j.cemconres.2013.09.002.
Panesar, D. K., and J. Francis. 2014. “Influence of limestone and slag on the pore structure of cement paste based on mercury intrusion porosimetry and water vapour sorption measurements.” Constr. Build. Mater. 52 (Feb): 52–58. https://doi.org/10.1016/j.conbuildmat.2013.11.022.
Perrot, A., D. Rangeard, V. Picandet, and Y. Melinge. 2013. “Hydro-mechanical properties of fresh cement pastes containing polycarboxylate superplasticizer.” Cem. Concr. Res. 53 (Nov): 221–228. https://doi.org/10.1016/j.cemconres.2013.06.015.
Plank, J., E. Sakai, C. W. Miao, C. Yu, and J. X. Hong. 2015. “Chemical admixtures—Chemistry, applications and their impact on concrete microstructure and durability.” Cem. Concr. Res. 78 (Dec): 81–99. https://doi.org/10.1016/j.cemconres.2015.05.016.
Plank, J., C. Schroefl, M. Gruber, M. Lesti, and R. Sieber. 2009. “Effectiveness of polycarboxylate superplasticizers in ultra-high strength concrete: The importance of PCE compatibility with silica fume.” J. Adv. Concr. Technol. 7 (1): 5–12. https://doi.org/10.3151/jact.7.5.
Plank, J., and C. Winter. 2008. “Competitive adsorption between superplasticizer and retarder molecules on mineral binder surface.” Cem. Concr. Res. 38 (5): 599–605. https://doi.org/10.1016/j.cemconres.2007.12.003.
Qian, Y., K. Lesage, K. El Cheikh, and G. De Schutter. 2018. “Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC).” Cem. Concr. Res. 107 (May): 75–84. https://doi.org/10.1016/j.cemconres.2018.02.019.
Ran, Q. P., P. Somasundaran, C. W. Miao, J. P. Liu, S. S. Wu, and J. Shen. 2009. “Effect of the length of the side chains of comb-like copolymer dispersants on dispersion and rheological properties of concentrated cement suspensions.” J. Colloid Interface Sci. 336 (2): 624–633. https://doi.org/10.1016/j.jcis.2009.04.057.
Ridi, F., L. Dei, E. Fratini, S. H. Chen, and P. Baglioni. 2003. “Hydration kinetics of tri-calcium silicate in the presence of superplasticizers.” J. Phys. Chem. B 107 (4): 1056–1061. https://doi.org/10.1021/jp027346b.
Sakai, E., T. Kasuga, T. Sugiyama, K. Asaga, and M. Daimon. 2006. “Influence of superplasticizers on the hydration of cement and the pore structure of hardened cement.” Cem. Concr. Res. 36 (11): 2049–2053. https://doi.org/10.1016/j.cemconres.2006.08.003.
Tan, H. B., Y. L. Guo, B. G. Ma, X. Li, and B. Q. Gu. 2016. “Adsorbing behavior of polycarboxylate superplasticizer in the presence of the ester group in side chain.” J. Dispersion Sci. Technol. 38 (5): 743–749. https://doi.org/10.1080/01932691.2016.1193814.
Tan, H. B., X. F. Deng, B. Q. Gu, B. Ma, S. Luo, Z. Zhi, Y. Guo, and F. Zou. 2018a. “Effect of borax and sodium tripolyphosphate on fluidity of gypsum paste plasticized by polycarboxylate superplasticizer.” Constr. Build. Mater. 176 (Jul): 394–402. https://doi.org/10.1016/j.conbuildmat.2018.05.005.
Tan, H. B., Y. L. Guo, B. G. Ma, J. Huang, B. Q. Gu, and F. B. Zou. 2018b. “Effect of sodium tripolyphosphate on clay tolerance of polycarboxylate superplasticizer.” KSCE J. Civ. Eng. 22 (8): 2934–2941. https://doi.org/10.1007/s12205-017-2017-4.
Tan, H. B., X. Zhang, Y. L. Guo, B. Ma, S. Jian, X. He, Z. Zhi, and X. Liu. 2018c. “Improvement in fluidity loss of magnesia phosphate cement by incorporating polycarboxylate superplasticizer.” Constr. Build. Mater. 165 (Mar): 887–897. https://doi.org/10.1016/j.conbuildmat.2017.12.214.
Yamada, K., T. Takahashi, S. Hanehara, and M. Matsuhisa. 2000. “Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer.” Cem. Concr. Res. 30 (2): 197–207. https://doi.org/10.1016/S0008-8846(99)00230-6.
Zhang, X. W., C. X. Lu, and J. Y. Shen. 2016. “Influence of tartaric acid on early hydration and mortar performance of portland cement-calcium aluminate cement-anhydrite binder.” Constr. Build. Mater. 112 (Jun): 877–884. https://doi.org/10.1016/j.conbuildmat.2016.02.214.
Zhang, Y., and X. Kong. 2015. “Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes.” Cem. Concr. Res. 69 (Mar): 1–9. https://doi.org/10.1016/j.cemconres.2014.11.009.
Zhang, Y. R., and X. M. Kong. 2014a. “Influences of PCE superplasticizer on the pore structure and the impermeability of hardened cementitious materials.” J. Adv. Concr. Technol. 12 (10): 443–455. https://doi.org/10.3151/jact.12.443.
Zhang, Y. R., and X. M. Kong. 2014b. “Influences of superplasticizer, polymer latexes and asphalt emulsions on the pore structure and impermeability of hardened cementitious materials.” Constr. Build. Mater. 53 (Feb): 392–402. https://doi.org/10.1016/j.conbuildmat.2013.11.104.
Zhang, Y. R., X. M. Kong, Z. B. Lu, Z. C. Lu, and S. S. Hou. 2015. “Effects of the charge characteristics of polycarboxylate superplasticizers on the adsorption and the retardation in cement pastes.” Cem. Concr. Res. 67 (Jan): 184–196. https://doi.org/10.1016/j.cemconres.2014.10.004.
Zou, F. B., H. B. Tan, Y. L. Guo, B. G. Ma, X. Y. He, and Y. Zhou. 2017. “Effect of sodium gluconate on dispersion of polycarboxylate superplasticizer with different grafting density in side chain.” J. Ind. Eng. Chem. 55 (Nov): 91–100. https://doi.org/10.1016/j.jiec.2017.06.032.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 32 • Issue 3 • March 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Oct 10, 2018
Accepted: Oct 17, 2019
Published online: Jan 3, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 3, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.