Effect of Fibers and Expansive Agent on Shrinkage of Self-Consolidating Concrete under Two Curing Schemes
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 9
Abstract
Adding the proper amount of expansive agent (EA) to concrete is an effective way to control shrinkage cracking. Fiber can be treated as a secondary reinforcement for controlling shrinkage and improving the crack resistance and mechanical properties of the concrete. To date, studies on shrinkage for concrete with fiber and expansive agent integration are very limited, especially for hybrid steel and polypropylene (PP) fibers. In this study, shrinkage tests for 21 mixtures of self-consolidating concrete (SCC) with different expansive agent dosages, fiber types [steel fibers (SF), PP fibers, and hybrid steel and PP fibers], fiber contents, as well as the incorporation of expansive agents and fibers were carried out. The shrinkage of the tested SCC at 10 h through 5 days after placement was analyzed to study the effects of different factors on early-stage free shrinkage. To study the effect of curing conditions on shrinkage, both sealed cure (S-Cure) and top-surface exposure cure (TE-Cure) were investigated for comparison. The test results showed that curing conditions had a significant impact on the shrinkage and expansion of the studied SCC mixtures. The shrinkage of SCC under TE-Cure was 5–10 times the shrinkage under S-Cure. The free expansion of expansive SCC (ESCC) under TE-cure was smaller than the free expansion under S-Cure. As the amount of expansive agent increased, the effect of curing conditions on the expansion of concrete change increased. Under both curing conditions, at equivalent fiber factors, the shrinkage-restraining effect of PP fibers on SCC was higher than that of steel fibers. Meanwhile, for ESCC, steel fiber presented a higher restraining effect on expansion than PP fibers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financial support provided by the National Natural Science Foundation of China (Grant Nos. 51208077 and 51421064), the Program for Liaoning Innovative Research Team in University (Grant No. LT2017005), the Natural Science Foundation of Liaoning Province (Grant No. 20170540168), and the Fundamental Research Funds for the Central Universities (Grant No. DUT17JC02).
References
Aly, T., J. G. Sanjayan, and F. Collins. 2008. “Effect of polypropylene fibers on shrinkage and cracking of concretes.” Mater. Struct. 41 (10): 1741–1753. https://doi.org/10.1617/s11527-008-9361-2.
Bandelj, B., and D. Sage. 2011. “Free shrinkage of high performance steel fiber reinforced concrete.” J. Test. Eval. 39 (2): 166–176. https://doi.org/10.1520/JTE103028.
Branston, J., S. Das, S. Y. Kenno, and C. Taylor. 2016. “Influence of basalt fibers on free and restrained plastic shrinkage.” Cem. Concr. Compos. 74: 182–190. https://doi.org/10.1016/j.cemconcomp.2016.10.004.
Cai, H., and J. Jin. 2000. “Study on the mechanical performance and deformed properties for steel fiber reinforced expansive concrete.” [In Chinese.] Concrete 4: 33–37.
Cao, Q., S. Hwang, K. Khayat, and G. Morcous. 2016. “Design and implementation of self-consolidating concrete for connecting precast concrete deck panels to bridge girders.” J. Mater. Civ. Eng. 28 (8): 04016058. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001563.
Carballosa, P., J. L. G. Calvo, D. Revuelta, J. J. Sánchez, and J. P. Gutiérrez. 2015. “Influence of cement and expansive additive types in the performance of self-stressing and self-compacting concretes for structural elements.” Constr. Build. Mater. 93: 223–229. https://doi.org/10.1016/j.conbuildmat.2015.05.113.
Chinese National Standards. 2007. Common portland cement. [In Chinese.] GB 175. Beijing: Standards Press of China.
Chinese National Standards. 2009. Standard for test methods of long-term performance and durability of ordinary concrete. [In Chinese.] GB/T 50082. Beijing: China Architecture & Building Press.
Corinaldesi, V. 2012. “Combined effect of expansive, shrinkage reducing and hydrophobic admixtures for durable self compacting concrete.” Constr. Build. Mater. 36: 758–764. https://doi.org/10.1016/j.conbuildmat.2012.04.129.
Corinaldesi, V., and G. Moriconi. 2011. “Characterization of self-compacting concretes prepared with different fibers and mineral additions.” Cem. Concr. Compos. 33 (5): 596–601. https://doi.org/10.1016/j.cemconcomp.2011.03.007.
Corinaldesi, V., and A. Nardinocchi. 2016. “Influence of type of fibers on the properties of high performance cement-based composite.” Constr. Build. Mater. 107: 321–331. https://doi.org/10.1016/j.conbuildmat.2016.01.024.
Daneti, S. B., T. H. Wee, and T. Thangayah. 2011. “Effect of polypropylene fibers on the shrinkage cracking behaviour of lightweight concrete.” Mag. Concr. Res. 63 (11): 871–881. https://doi.org/10.1680/macr.2011.63.11.871.
Garas, V. Y., L. F. Kahn, and K. E. Kurtis. 2009. “Short-term tensile creep and shrinkage of ultra-high performance concrete.” Cem. Concr. Compos. 31 (3): 147–152. https://doi.org/10.1016/j.cemconcomp.2009.01.002.
He, H., J. Qin, and C. Huang. 2009. “Experimental research on long-term restrained deformation of steel fiber reinforced micro-concrete.” [In Chinese.] China Concr. Cem. Prod. 2: 41–44.
Huang, K., M. Deng, L. Mo, and Y. Wang. 2013. “Early age stability of concrete pavement by using hybrid fiber together with MgO expansive agent in high altitude locality.” Constr. Build. Mater. 48: 685–690. https://doi.org/10.1016/j.conbuildmat.2013.07.089.
Khayat, K. H., and W. J. Long. 2010. “Shrinkage of precast, prestressed self-consolidating concrete.” ACI Mater. J. 107 (3): 231–238.
Kim, M. O., and A. C. Bordelon. 2017. “Age-dependent properties of fiber-reinforced concrete for thin concrete overlays.” Constr. Build. Mater. 137: 288–299. https://doi.org/10.1016/j.conbuildmat.2017.01.097.
Li, M., J. Liu, Q. Tian, Y. Wang, and W. Xu. 2017. “Efficacy of internal curing combined with expansive agent in mitigating shrinkage deformation of concrete under variable temperature condition.” Constr. Build. Mater. 145: 354–360. https://doi.org/10.1016/j.conbuildmat.2017.04.021.
Li, S., H. Qian, and J. Li. 2014. “Influence of HCSA expansive agent on early age shrinkage of self compacting concrete.” [In Chinese.] China Concr. Cem. Prod. 223 (11): 21–24.
Li, X. Q., B. Tian, W. Liu, and S. Su. 2013. “Study on the effect of different admixtures on the early autogenous shrinkage of high performance concrete of bridge deck pavement.” Adv. Mater. Res. 857: 56–63. https://doi.org/10.4028/www.scientific.net/AMR.857.56.
Li, Z., and W. Tian. 2002. “Experimental study on deformation performances of steel fiber reinforced expansive concrete.” [In Chinese.] China Concr. Cem. Prod. 6: 40–43.
Liu, J., S. Zhang, Q. Tian, F. Guo, and Y. Wang. 2010. “Deformation behavior of high performance concrete containing MgO composite expansive agent.” [In Chinese.] J. Southeast Univ. (Nat. Sci. Ed.) 40 (z2): 150–154.
Mangat, P., and M. Azari. 1990. “Plastic shrinkage of steel fiber reinforced concrete.” Materiaux et Constructions 23 (135): 186–195. https://doi.org/10.1007/BF02473017.
Meddash, M. S., M. Suzuki, and R. Sato. 2011. “Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete.” Constr. Build. Mater. 25 (1): 239–250. https://doi.org/10.1016/j.conbuildmat.2010.06.033.
Miao, M., and P. Yan. 2012. “Influences of water-binder ratio and dosage of fly ash on autogeneous shrinkage of shrinkage-compensating concrete.” [In Chinese.] J. Chin. Ceram. Soc. 40 (11): 1607–1612.
Mo, J., Z. Ou, J. Liu, and Y. Wang. 2016. “Effect of undercalcined MgO and hybrid fiber on the autogenous shrinkage of reactive powder concrete.” Syst. Sci. Technol. 17 (19): 18.1–18.7.
Schindler, A. K., R. W. Barnes, J. B. Roberts, and S. Rodriguez. 2007. “Properties of self-consolidating concrete for prestressed members.” ACI Mater. J. 104 (1): 53–61.
Su, A., L. Qin, S. Zhang, and Z. Li. 2017. “Effects of shrinkage reducing agent and expansive admixture on the volume deformation of ultrahigh performance.” Adv. Mater. Eng. 5: 1–7. https://doi.org/10.1155/2017/6384859.
Sun, D., M. Deng, and M. Tang. 2005. “Study on the durability of the fiber and hybrid fiber reinforced expansive concrete.” [In Chinese.] Ind. Constr. 35 (4): 69–71.
Sun, W., H. Chen, X. Luo, and H. Qian. 2001. “The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete.” Cem. Concr. Res. 31 (4): 595–601. https://doi.org/10.1016/S0008-8846(00)00479-8.
Tian, W., C. Huang, S. Li, and Z. Li. 2002. “Basic performance of cracking and permeability resistance concrete and reinforced concrete pipe.” [In Chinese.] J. Hydraul. Eng. 1: 40–46.
Wongtanakitcharoen, T., and A. E. Naaman. 2007. “Unrestrained early age shrinkage of concrete with polypropylene, PVA, and carbon fibers.” Mater. Struct. 40 (3): 289–300. https://doi.org/10.1617/s11527-006-9106-z.
Yoo, D. Y., J. Y. Lee, H. O. Shin, and Y. S. Yoon. 2015. “Enhancing cracking resistance of ultra-high-performance concrete slabs using steel fibers.” Mag. Concr. Res. 67 (10): 487–495. https://doi.org/10.1680/macr.14.00116.
Yoo, D. Y., K. H. Min, J. H. Lee, and Y. S. Yoon. 2014. “Shrinkage and cracking of restrained ultra-high-performance fiber-reinforced concrete slabs at early age.” Constr. Build. Mater. 73: 357–365. https://doi.org/10.1016/j.conbuildmat.2014.09.097.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 29, 2018
Accepted: Jan 15, 2019
Published online: Jun 26, 2019
Published in print: Sep 1, 2019
Discussion open until: Nov 26, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.