Key Factors and Optimal Conditions for Self-Healing of Bituminous Binder
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 9
Abstract
To identify the key influencing factors and optimal healing conditions for the self-healing ability of bituminous binders, a fatigue-healing-fatigue test was performed under different conditions by the time-sweep mode of a dynamic shear rheometer (DSR). The influence and significance of five factors on healing index were analyzed through a gray correlation analysis. The healing temperature had the most significant correlation with the healing index. In addition, bitumen type, strain size, and degree of damage exhibit significant correlation with the healing index. The effect of healing time is insignificant. This study investigates the flow characteristics of bitumen binder using the viscosity frequency sweep mode of DSR to determine the potential optimal healing temperature. Then, 1stOpt software was used to establish a healing index prediction model to determine the optimal healing time. The optimum healing temperature of #70 matrix bitumen is 47.6°C, slightly higher than the softening point, and the optimum healing time is 48.1 min. The optimum healing temperature of styrene-butadiene-styrene (SBS)–modified bitumen is 76.7°C, slightly lower than the softening point, and the optimum healing time is 30.8 min.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The investigation described in this paper is supported by National Natural Science Foundation of China (51278513) and Science and Technology Project of the Communication Department of Guizhou Province, China (2018-131-002), which are gratefully acknowledged.
References
Ayar, P., F. Moreno-Navarro, and M. C. Rubio-Gámez. 2016. “The healing capability of asphalt pavements: A state of the art review.” J. Cleaner Prod. 113: 28–40. https://doi.org/10.1016/j.jclepro.2015.12.034.
Bazin, P., and J. B. Saunier. 1967. “Deformability, fatigue and healing properties of asphalt mixes.” In Proc., Int. Conf. on the Structural Design of Asphalt Pavements, 438–451. Ann Arbor, MI.
Chen, H., Y. Yuan, Z. Zhang, and C. Hu. 2005. “Influencing factors in dynamic shear rheometer tests.” [In Chinese.] J. Cent. South Highway Eng. 30 (2): 142–145.
Chinese Standard. 2004. Technical specifications for construction of highway asphalt pavement. [In Chinese.] JTG F40. Beijing: People’s Communications Press.
Cui, Y. L., C. Chen, and L. Zhao. 2018. “Microstructure and self-healing performance experiment of SBS-modified asphalt after heat aging.” [In Chinese.] Polym. Mater. Sci. Eng. 34 (5): 65–70. https://doi.org/10.16865/j.cnki.1000-7555.2018.05.011.
García, A. 2012. “Self-healing of open cracks in asphalt mastic.” Fuel 93 (1): 264–272. https://doi.org/10.1016/j.fuel.2011.09.009.
García, A., J. Norambuena-Contreras, M. Bueno, and M. N. Partl. 2014. “Influence of steel wool fibers on the mechanical, termal, and healing properties of dense asphalt concrete.” J. Test. Eval. 42 (5): 1107–1118. https://doi.org/10.1520/JTE20130197.
Heyes, D. M., P. J. Mitchell, and P. B. Visscher. 1994. “Viscoelasticity and near-newtonian behaviour of concentrated dispersions by Brownian dynamics simulations.” In Trends in colloid and interface science VIII. Heidelberg, Germany: Steinkopff.
Kim, Y. R., D. N. Little, and R. L. Lytton. 2003. “Fatigue and healing characterization of asphalt mixtures.” J. Mater. Civ. Eng. 15 (1): 75–83. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(75).
Luo, R., Y. Xu, H. Liu, and G. Feng. 2018. “Correction on self-healing index of asphalt binder and influence factors analyzing.” [In Chinese.] J. Build. Mater. 21 (2): 340–344. https://doi.org/10.3969/j.issn.1007-9629.2018.02.027.
Menozzi, A., A. Garcia, M. N. Partl, G. Tebaldi, and P. Schuetz. 2015. “Induction healing of fatigue damage in asphalt test samples.” Constr. Build. Mater. 74: 162–168. https://doi.org/10.1016/j.conbuildmat.2014.10.034.
Qiu, J., M. F. C. V. D. Ven, S. P. Wu, J. Y. Yu, and A. A. A. Molenaar. 2011. “Investigating self-healing behaviour of pure bitumen using dynamic shear rheometer.” Fuel 90 (8): 2710–2720. https://doi.org/10.1016/j.fuel.2011.03.016.
Sun, D., F. Liu, T. Lin, and L. Cao. 2016. “Fatigue life evaluation method and prediction equation for asphalt mortars.” [In Chinese.] J. Build. Mater. 19 (1): 100–104. https://doi.org/10.3969/j.issn.1007-9629.2016.01.017.
Sun, Y. H., Q. T. Liu, S. P. Wu, and F. Shang. 2014. “Microwave heating of steel slag asphalt mixture.” Key Eng. Mater. 599: 193–197. https://doi.org/10.4028/www.scientific.net/KEM.599.193.
Sung, Y. T., C. K. Kum, H. S. Lee, J. S. Kim, H. G. Yoon, and W. N. Kim. 2005. “Effects of crystallinity and crosslinking on the thermal and rheological properties of ethylene vinyl acetate copolymer.” Polymer 46 (25): 11844–11848. https://doi.org/10.1016/j.polymer.2005.09.080.
Sybilski, D. 1993. “Non-Newtonian viscosity of polymer-modified bitumens.” Mater. Struct. 26 (1): 15–23. https://doi.org/10.1007/BF02472233.
Wang, H., J. Yang, Z. Wang, M. Gong, and X. Wang. 2014. “Investigation of fatigue and self-healing characteristics of asphalt mixtures.” [In Chinese.] Mod. Transp. Technol. 11 (4): 1–5.
Wool, R. P., and K. M. O’Connor. 1981. “A theory of crack healing in polymers.” J. Appl. Phys. 52 (10): 5953–5963. https://doi.org/10.1063/1.328526.
Wool, R. P., and K. M. O’Connor. 1982. “Time dependence of crack healing.” J. Polym. Sci. Part C Polym. Lett. 20 (1): 7–16. https://doi.org/10.1002/pol.1982.130200102.
Wu, D. Y., S. Meure, and D. Solomon. 2008. “Self-healing polymeric materials: A review of recent developments.” Prog. Polym. Sci. 33 (5): 479–522. https://doi.org/10.1016/j.progpolymsci.2008.02.001.
Wu, S., C. Jiang, J. Lin, J. Kin, and Z. Zhu. 2013. “Research on fatigue characteristic of aged asphalt binder.” [In Chinese.] J. Wuhan Univ. Technol. 37 (3): 451–455. https://doi.org/10.3963/j.issn.2095-3844.2013.03.001.
Xu, C., Z. Y. He, and W. J. Wu. 2014. “Evaluation of self-healing properties of asphalt under different influencing factors.” [In Chinese.] J. China Foreign Highway 34 (2): 274–278. https://doi.org/10.3969/j.issn.1671-2579.2014.02.065.
Yang, J., M. Gong, and Z. Wang. 2013. “Multiscale research progress of fatigue and self-healing properties of asphalt mixtures.” [In Chinese.] China Sciencepaper 8 (5): 435–440.
Zhang, Y., L. Li, and Z. H. Hao. 2016. “Contribution mechanism of oxidation and volatilization in SBS modified asphalt under superheat aging mode.” [In Chinese.] Polym. Mater. Sci. Eng. 32 (10): 94–99. https://doi.org/10.16865/j.cnki.1000-7555.2016.10.017.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Sep 26, 2018
Accepted: Jan 15, 2019
Published online: Jun 17, 2019
Published in print: Sep 1, 2019
Discussion open until: Nov 17, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.