Influence of Bar Diameter on Low-Cycle Fatigue Degradation of Reinforcing Bars
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 4
Abstract
This paper reports the results of 120 low-cycle fatigue tests on steel reinforcing bars with varying slenderness ratios at varying strain amplitudes. The failure modes of the fractured bars were investigated through analysis of the fracture mechanisms of bars. The results of experimental testing were used to update empirical models of low-cycle fatigue life for such bars. The newly improved empirical models were then incorporated into a recently developed constitutive material model that accounts for bar buckling and fatigue. The experimental results show that the size effect is significant for short steel reinforcing bars where there is no buckling. The results also show that as the slenderness ratio of the steel reinforcing bars increases, the influence of the bar diameter on low-cycle fatigue reduces.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The experimental program was financially supported by the Earthquake and Geotechnical Engineering Research Group (EGERG) at the University of Bristol. The SEM studies were conducted in the Chemistry Imaging Facility with equipment funded by the University of Bristol and the Engineering and Physical Sciences Research Council Grant No. EP/K035746/1. The second author is thankful for the financial support provided by China Scholarship Council (File No. 201506260126). Any recommendations provided in this paper are the opinions of the authors and do not constitute a standard or code of practice. The authors thank the anonymous reviewers for their help improving the paper. The raw test data from the LCF tests are available from Kashani et al. (2018a).
References
Brown, J., and S. K. Kunnath. 2000. Low cycle fatigue behavior of longitudinal reinforcement in reinforced concrete bridge columns. Buffalo, NY: National Center for Earthquake Engineering Research, Univ. at Buffalo, State Univ. of New York.
Brown, J., and S. K. Kunnath. 2004. “Low-cycle fatigue failure of reinforcing steel bars.” ACI Mater. J. 101 (6): 457–466.
BSI (British Standards Institution). 2016. Steel for the reinforcement of concrete—Weldable reinforcing steel—Bar, coil and decoiled product—Specification. BS 4449-2005+A3:2016. London: BSI.
CEB (Comite Euro-International Du Beton). 1996. RC Elements under cyclic loading—State-of-the-art report. London: Thomas Telford.
Chang, G. A., and J. B. Mander. 1994. Seismic energy based fatigue damage analysis of bridge columns. Part I: Evaluation of seismic capacity. Buffalo, NY: National Center for Earthquake Engineering Research, Univ. at Buffalo, State Univ. of New York.
Dhakal, R., and K. Maekawa. 2002. “Path-dependent cyclic stress-strain relationship of reinforcing bar including buckling.” Eng. Struct. 24 (11): 1139–1147. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1139).
El-Bahy, A., S. K. Kunnath, W. C. Stone, and A. W. Taylor. 1999. “Cumulative seismic damage of circular bridge columns: Benchmark and low-cycle fatigue tests.” ACI Struct. J. 96 (4): 633–641.
Gehlen, C., K. Osterminski, and T. Weirich. 2016. “High-cycle fatigue behaviour of reinforcing steel under the effect of ongoing corrosion.” Struct. Concr. 17 (3): 329–337. https://doi.org/10.1002/suco.201500094.
Gomes, A., and J. Appleton. 1997. “Nonlinear cyclic stress-strain relationship of reinforcing bars including buckling.” Eng. Struct. 19 (10): 822–826. https://doi.org/10.1016/S0141-0296(97)00166-1.
Hawileh, R. A., J. A. Abdalla, F. Oudah, and K. Abdelrahman. 2010. “Low-cycle fatigue life behaviour of BS 460B and BS B500B steel reinforcing bars.” Fatigue Fract. Eng. Mater. Struct. 33 (7): 397–407. https://doi.org/10.1111/j.1460-2695.2010.01452.x.
Higai, T., H. Nakamura, and S. Saito. 2006. “Fatigue failure criterion for deformed bars subjected to large deformation reversals.” Chap. 4 in Finite element analysis of reinforced concrete structures: ACI special publication 237, 37–54. Farmington Hills, MI: ACI.
Kam, W. Y., and S. Pampanin. 2011. “The seismic performance of RC buildings in the 22 February 2011 Christchurch earthquake.” Struct. Concr. 12 (4): 223–233. https://doi.org/10.1002/suco.201100044.
Kashani, M. M. 2017. “Size effect on inelastic buckling behavior of accelerated pitted corroded bars in porous media.” J. Mater. Civ. Eng. 29 (7): 04017022. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001853.
Kashani, M. M., P. Alagheband, R. Khan, and S. Davis. 2015a. “Impact of corrosion on low-cycle fatigue degradation of reinforcing bars with the effect of inelastic buckling.” Int. J. Fatigue 77: 174–185. https://doi.org/10.1016/j.ijfatigue.2015.03.013.
Kashani, M. M., A. K. Barmi, and V. S. Malinova. 2015b. “Influence of inelastic buckling on low cycle fatigue degradation of reinforcing bars.” Constr. Build. Mater. 94: 644–655. https://doi.org/10.1016/j.conbuildmat.2015.07.102.
Kashani, M. M., S. Cai, S. A. Davis, and P. J. Vardanega. 2018a. "Supporting data for ‘Influence of bar diameter on low-cycle fatigue degradation of reinforcing bars’." Univ. of Bristol. Accessed January 24, 2019. https://doi.org/10.5523/bris.1kz5015zjoel92ueb97kwxd4ps.
Kashani, M. M., A. J. Crewe, and N. A. Alexander. 2013a. “Nonlinear cyclic response of corrosion-damaged reinforcing bars with the effect of buckling.” Constr. Build. Mater. 41: 388–400. https://doi.org/10.1016/j.conbuildmat.2012.12.011.
Kashani, M. M., A. J. Crewe, and N. A. Alexander. 2013b. “Nonlinear stress-strain behaviour of corrosion damaged reinforcing bars including inelastic buckling.” Eng. Struct. 48: 417–429. https://doi.org/10.1016/j.engstruct.2012.09.034.
Kashani, M. M., L. N. Lowes, A. J. Crewe, and N. A. Alexander. 2014. “Finite element investigation of the influence of corrosion pattern on inelastic buckling and cyclic response of corroded reinforcing bars.” Eng. Struct. 75: 113–125. https://doi.org/10.1016/j.engstruct.2014.05.026.
Kashani, M. M., L. N. Lowes, A. J. Crewe, and N. A. Alexander. 2015c. “Phenomenological hysteretic model for corroded reinforcing bars including inelastic buckling and low-cycle fatigue degradation.” Comput. Struct. 156: 58–71. https://doi.org/10.1016/j.compstruc.2015.04.005.
Kashani, M. M., L. N. Lowes, A. J. Crewe, and N. A. Alexander. 2016. “Nonlinear fibre element modelling of RC bridge piers considering inelastic buckling of reinforcement.” Eng. Struct. 116: 163–177. https://doi.org/10.1016/j.engstruct.2016.02.051.
Kashani, M. M., M. R. Salami, K. Goda, and N. A. Alexander. 2018b. “Non-linear flexural behaviour of RC columns including bar buckling and fatigue degradation.” Mag. Concr. Res. 70 (5): 231–247. https://doi.org/10.1680/jmacr.16.00495.
Koh, S. K., and R. I. Stephens. 1991. “Mean stress effects on low cycle fatigue for a high strength steel.” Fatigue Fract. Eng. Mater. Struct. 14 (4): 413–428. https://doi.org/10.1111/j.1460-2695.1991.tb00672.x.
Kunnath, S. K., Y. Heo, and J. F. Mohle. 2009. “Nonlinear uniaxial material model for reinforcing steel bars.” J. Struct. Eng. 135 (4): 335–343. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(335).
Lee, J., and G. L. Fenves. 1998. “Plastic-damage model for cyclic loading of concrete structures.” J. Eng. Mech. 124 (8): 892–900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892).
Lehman, D. E., and J. P. Moehle. 2000. Seismic performance of well-confined concrete columns. Berkeley, CA: Univ. of California.
Mander, J. B., F. D. Panthaki, and A. Kasalanati. 1994. “Low-cycle fatigue behavior of reinforcing steel.” J. Mater. Civ. Eng. 6 (4): 453–468. https://doi.org/10.1061/(ASCE)0899-1561(1994)6:4(453).
Mander, J. B., and G. W. Rodgers. 2015. “Analysis of low cycle fatigue effects on structures due to the 2010–2011 Canterbury earthquake sequence.” In Proc., 10th Pacific Conf. on Earthquake Engineering—Building an Earthquake-Resilient Pacific. Sydney, Australia.
Moehle, J. P., and G. G. Deierlein. 2004. “A framework methodology for performance-based earthquake engineering.” In Proc., 13th World Conf. on Earthquake Engineering. Vancouver, Canada.
Monti, G., and C. Nuti. 1992. “Nonlinear cyclic behavior of reinforcing bars including buckling.” J. Struct. Eng. 118 (12): 3268–3284. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:12(3268).
Neuenhofer, A., and F. C. Filippou. 1997. “Evaluation of nonlinear frame finite-element models.” J. Struct. Eng. 123 (7): 958–966. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:7(958).
OpenSees. 2014. “The open system for earthquake engineering simulation.” University of California, Berkeley, CA. Accessed September 10, 2018. http://opensees.berkeley.edu/.
Phan, V., M. S. Saiidi, J. Anderson, and H. Ghasemi. 2007. “Near-fault ground motion effects on reinforced concrete bridge columns.” J. Struct. Eng. 133 (7): 982–989. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:7(982).
Rodriguez, M. E., J. C. Botero, and J. Villa. 1999. “Cyclic stress-strain behavior of reinforcing steel including the effect of buckling.” J. Struct. Eng. 125 (6): 605–612. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(605).
Toniolo, G., and A. Colombo. 2012. “Precast concrete structures: The lessons learned from the L’Aquila earthquake.” Struct. Concr. 13 (2): 73–83. https://doi.org/10.1002/suco.201100052.
Wehbe, N. I., M. S. Saiidi, and D. H. Sanders. 1999. “Seismic performance of rectangular bridge columns with moderate confinement.” ACI Struct. J. 96 (2): 248–258.
Zeris, C. A., and S. A. Mahin. 1988. “Analysis of reinforced concrete beam-columns under uniaxial excitation.” J. Struct. Eng. 114 (4): 804–820. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:4(804).
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Feb 15, 2018
Accepted: Sep 10, 2018
Published online: Jan 31, 2019
Published in print: Apr 1, 2019
Discussion open until: Jun 30, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.