Influence of Types of Grouting Materials on Compressive Strength and Crack Behavior of Rocklike Specimens with Single Grout-Infilled Flaw under Axial Loads
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 1
Abstract
Rocklike specimens with a grout-infilled flaw having different inclination angles were prepared for uniaxial compressive tests to study the effect of types of grouting materials and flaw inclination angle on the compressive strength and crack behavior of specimens. Epoxy resin and cement paste were chosen as grouting materials; the mechanical properties of these two grouting materials are totally different. The experimental results showed that types of grouting materials play a significant role in improving the uniaxial compressive strength of specimens with a grout-infilled flaw. The grouting effect for epoxy resin is better than that of cement paste. The grouting effect has a close relation to the flaw inclination angle; whether the specimen is grouted with cement paste or epoxy resin, the grouting effect is significant when the flaw inclination angle is 60° and not good when the flaw inclination angle is 90°. Cracking behaviors and failure patterns were found to be affected by grouting materials and flaw inclination angle. The present study is helpful to understand the mechanical properties of rock masses with grout-infilled fractures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Natural Science Foundation of China (Grant Nos. 41672258 and 41102162) and Postgraduate Research and Practice Innovation Program of Jiangsu Province (No. KYCX18_0622) funded this research. This research is also supported by supported by “The Fundamental Research Funds for the Central Universities” (No. 2018B695X14). Chinese Scholarship Council provided a scholarship for the first author of the paper to be a visiting scholar at the University of Arizona and provided a platform for academic communication.
References
ASTM. 2014. Standard test methods for compressive strength and elastic moduli of intact rock core specimens under varying states of stress and temperatures. ASTM D7012. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for performing laboratory direct shear strength tests of rock specimens under constant normal force. ASTM D5607. West Conshohocken, PA: ASTM.
Bobet, A., and H. H. Einstein. 1998. “Fracture coalescence in rock-type materials under uniaxial and biaxial compression.” Int. J. Rock Mech. Min. Sci. 35 (7): 863–888. https://doi.org/10.1016/S0148-9062(98)00005-9.
Bruce, D. A. 2011. “Rock grouting for dams and the need to fight regressive thinking.” Geotech. News 29 (2): 23–30.
Cao, P., T. Liu, C. Pu, and H. Lin. 2015. “Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compression.” Eng. Geol. 187: 113–121. https://doi.org/10.1016/j.enggeo.2014.12.010.
Cheng, H., X. Zhou, J. Zhu, and Q. Qian. 2016. “The effects of crack openings on crack initiation, propagation and coalescence behavior in rock-like materials under uniaxial compression.” Rock Mech. Rock Eng. 49 (9): 3481–3494. https://doi.org/10.1007/s00603-016-0998-9.
Duriez, J., L. Scholtès, and F. V. Donzé. 2016. “Micromechanics of wing crack propagation for different flaw properties.” Eng. Fract. Mech. 153: 378–398. https://doi.org/10.1016/j.engfracmech.2015.12.034.
El Tani, M. 2012. “Grouting rock fractures with cement grout.” Rock Mech. Rock Eng. 45 (4): 547–561. https://doi.org/10.1007/s00603-012-0235-0.
Gratchev, I., H. K. Dong, and K. Y. Chong. 2016. “Strength of rock-like specimens with preexisting cracks of different length and width.” Rock Mech. Rock Eng. 49 (11): 4491–4496. https://doi.org/10.1007/s00603-016-1013-1.
Haeri, H. 2015. “Propagation mechanism of neighboring cracks in rock-like cylindrical specimens under uniaxial compression.” J. Min. Sci. 51 (3): 487–496. https://doi.org/10.1134/S1062739115030096.
Huang, D., D. Gu, Y. Chao, R. Huang, and G. Fu. 2016. “Investigation on mechanical behaviors of sandstone with two preexisting flaws under triaxial compression.” Rock Mech. Rock Eng. 49 (2): 375–399. https://doi.org/10.1007/s00603-015-0757-3.
Huang, J., G. Chen, Y. Zhao, and R. Wang. 1990. “An experimental study of the strain field development prior to failure of a marble plate under compression.” Tectonophysics 175 (1–3): 269–284. https://doi.org/10.1016/0040-1951(90)90142-U.
Jaeger, J. C. 1960. “Shear failure of anisotropic rocks.” Geol. Mag. 97 (01): 65–79. https://doi.org/10.1017/S0016756800061100.
Janeiro, R. P., and H. H. Einstein. 2010. “Experimental study of the cracking behavior of specimens containing inclusions (under uniaxial compression).” Int. J. Fract. 164 (1): 83–102. https://doi.org/10.1007/s10704-010-9457-x.
Le, H., S. Sun, P. H. S. W. Kulatilake, and J. Wei. 2018. “Effect of grout on mechanical properties and cracking behavior of rock-like specimens containing single flaw under uniaxial compression.” Int. J. Geomech. 18 (10): 04018129. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001225.
Li, Y. P., L. Z. Chen, and Y. H. Wang. 2005. “Experimental research on pre-cracked marble under compression.” Int. J. Solids Struct. 42 (9–10): 2505–2516. https://doi.org/10.1016/j.ijsolstr.2004.09.033.
Liu, H. Y., and L. M. Zhang. 2015. “A damage constitutive model for rock mass with nonpersistently closed joints under uniaxial compression.” Arab. J. Sci. Eng. 40 (11): 3107–3117. https://doi.org/10.1007/s13369-015-1777-8.
Liu, Q., G. Lei, X. Peng, C. Lu, and L. Wei. 2018. “Rheological characteristics of cement grout and its effect on mechanical properties of a rock fracture.” Rock Mech. Rock Eng. 51 (2): 613–625. https://doi.org/10.1007/s00603-017-1340-x.
Nonveiller, E. 1989. Grouting theory and practice. Amsterdam, Netherlands: Elsevier.
Park, C. H., and A. Bobet. 2010. “Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression.” Eng. Fract. Mech. 77 (14): 2727–2748. https://doi.org/10.1016/j.engfracmech.2010.06.027.
Salimian, M. H., A. Baghbanana, H. Hashemolhosseini, M. Dehghanipoodeh, and S. Norouzi. 2017. “Effect of grouting on shear behavior of rock joint.” Int. J. Rock Mech. Min. Sci. 98: 159–166. https://doi.org/10.1016/j.ijrmms.2017.07.002.
Wong, R. H. C., and K. T. Chau. 1998. “Crack coalescence in rock-like material containing two cracks.” Int. J. Rock Mech. Min. Sci. 35 (2): 147–164. https://doi.org/10.1016/S0148-9062(97)00303-3.
Xie, Y. S., P. Cao, J. Liu, and L. W. Dong. 2016. “Influence of crack surface friction on crack initiation and propagation: A numerical investigation based on extended finite element method.” Comput. Geotech. 74: 1–14. https://doi.org/10.1016/j.compgeo.2015.12.013.
Xu, H. F., H. S. Geng, F. Chen, X. Chen, and L. L. Qi. 2017. “Strength assessment of broken rock postgrouting reinforcement based on initial broken rock quality and grouting quality.” Math. Probl. Eng. 2014: 1–14. https://doi.org/10.1155/2017/3651765.
Zhao, Z., and D. Zhou. 2016. “Mechanical properties and failure patterns of rock samples with grout-infilled flaws: A particle mechanics modeling.” J. Nat. Gas. Sci. Eng. 34: 702–715. https://doi.org/10.1016/j.jngse.2016.07.022.
Zhuang, X., J. Chun, and H. Zhu. 2014. “A comparative study on unfilled and filled crack propagation for rock-like brittle material.” Theor. Appl. Fract. Mech. 72 (1): 110–120. https://doi.org/10.1016/j.tafmec.2014.04.004.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 15, 2017
Accepted: Jul 2, 2018
Published online: Oct 25, 2018
Published in print: Jan 1, 2019
Discussion open until: Mar 25, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.