Prediction of Concrete Coefficient of Thermal Expansion by Effective Self-Consistent Method Considering Coarse Aggregate Shape
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 12
Abstract
Thermal cracking is a perennial concern for large-volume concrete projects; for instance, dams and foundations. The concrete coefficient of thermal expansion (CTE) is well recognized as a key parameter influencing thermal cracking of concrete. Aggregates are volumetrically the predominant constituent of concrete. Aggregate shape varies due to rock type and manufacturing methods. However, its effect on concrete CTE has rarely been studied. This study develops an analytical approach based on effective self-consistent theory to predict concrete CTE considering coarse aggregate shape. The analytical model is validated with laboratory tests. It is found that coarse aggregate shape has little effect on concrete CTE. The influences of other factors on concrete CTE are also studied, including coarse aggregate gradation and type, coarse aggregate, and cement mortar CTEs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was financially supported by the National Natural Science Foundation of China (Grant Nos. 51508137, 51509139), China Postdoctoral Science Foundation (CN) (Grant Nos. 2014M560266, 2015M570108), Fundamental Research Funds for the Central Universities [DUT17RC(3)006], and Yunan Applied Basic Research Projects (Grant No. 2016FB099).
References
AASHTO. 2009. Standard test method for the coefficient of thermal expansion of hydraulic cement concrete. AASHTO T336. Washington, DC: AASHTO.
ACI. 1991. Standard practice for selecting proportions for normal, heavyweight, and mass concrete. ACI 211. Farmington Hills, MI: ACI.
Applied Research Associates. 2004. Guide for the mechanistic-empirical design for new and rehabilitated pavement structures. Washington, DC: Transportation Research Board of the National Academics.
ASTM. 2016. Standard specification for concrete aggregates. ASTM C33. West Conshohocken, PA: ASTM.
Bazant, Z. P., and R. R. Tabbara. 1990. “Random particle models for fracture of aggregate or fiber composites.” J. Eng. Mech. 116 (8): 1686–1705. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:8(1686).
Benveniste, Y. 1987. “A new approach to the application of Mori-Tanaka’s theory in composite materials.” Mechanics of materials 6 (2): 147–157. https://doi.org/10.1016/0167-6636(87)90005-6.
Cao, P., F. Jin, C. Zhou, D. Feng, and W. Song. 2016. “Steady-state dynamic method: An efficient and effective way to predict dynamic modulus of asphalt concrete.” Constr. Build. Mater. 111: 54–62. https://doi.org/10.1016/j.conbuildmat.2016.02.071.
Ceylan, H., S. Kim, K. Gopalakrishnan, C. W. Schwartz, and R. Li. 2013. “Sensitivity quantification of jointed plain concrete pavement mechanistic-empirical performance predictions.” Constr. Build. Mater. 43: 545–556. https://doi.org/10.1016/j.conbuildmat.2013.02.057.
Du, J. 2000. “Theoretical studies on the effective properties of multiphase materials.” Ph.D. dissertation, Institute of Solid Mechanics, School of Aerospace Engineering, Tsinghua Univ.
Eshelby, J. D. 1959. “Elastic Field Outside an Ellipsoidal Inclusion.” Proc. R. Soc. Math. Phys. Eng. Sci. 252 (1271): 561–569. https://doi.org/10.1098/rspa.1959.0173.
Gu, X., H. Qian, H. Liu, and S. Wang. 2003. Subgrade and foundation. Beijing: China Architecture and Building.
Huang, M., W. Zou, and Q. S. Zheng. 2009. “Explicit expression of Eshelby tensor for arbitrary weakly non-circular inclusion in two-dimensional elasticity.” Int. J. Eng. Sci. 47 (11–12): 1240–1250. https://doi.org/10.1016/j.ijengsci.2009.01.005.
JTG. 2015. Technical guidelines for construction of highway cement concrete pavements. JTG F30. Beijing: Ministry of Transport of the People’s Republic of China.
Li, G., Y. Li, J. B. Metcalf, and S. S. Pang. 1999. “Elastic modulus prediction of asphalt concrete.” J. Mater. Civ. Eng. 11 (3): 236–241. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:3(236).
Li, Y., and J. B. Metcalf. 2005. “Two-step approach to prediction of asphalt concrete modulus from two-phase micromechanical models.” J. Mater. Civ. Eng. 17 (4): 407–415. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:4(407).
Mori, T., and K. Tanaka. 1973. “Average stress in matrix and average elastic energy of materials with misfitting inclusions.” Acta metallurgica 21 (5): 571–574. https://doi.org/10.1016/0001-6160(73)90064-3.
Neville, A. 2004. “The confused world of sulfate attack on concrete.” Cem. Concr. Res. 34 (8): 1275–1296. https://doi.org/10.1016/j.cemconres.2004.04.004.
Nie, Q., C. Zhou, H. Li, X. Shu, and B. Huang. 2015. “Numerical simulation of fly ash concrete under sulfate attack.” Constr. Build. Mater. 84: 261–268. https://doi.org/10.1016/j.conbuildmat.2015.02.088.
Rodin, G. J. 1996. “Eshelby’s inclusion problem for polygons and polyhedra.” J. Mech. Phys. Solids 44 (12): 1977–1995. https://doi.org/10.1016/S0022-5096(96)00066-X.
Shen, A. 1994. “Analysis of Reliability to Determine Elasticity Module of Concrete Mortar with Ultrasonic.” Xi’an Highway Jiaotong Univ. 14 (2): 44–47.
Shin, H., and Y. Chung. 2011. Determination of coefficient of thermal expansion effects on Louisiana’s PCC pavement design. Baton Rouge, LA: Louisiana State Univ.
Shu, X., and B. Huang. 2008. “Dynamic modulus prediction of HMA mixtures based on the viscoelastic micromechanical model.” J. Mater. Civ. Eng. 20 (8): 530–538. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:8(530).
Shu, X., and B. Huang. 2009. “Predicting dynamic modulus of asphalt mixtures with differential method.” Road Mater. Pavement Des. 10 (2): 337–359. https://doi.org/10.1080/14680629.2009.9690198.
Siddiqui, M. S., and D. W. Fowler. 2013. “Optimizing the COTE of concrete by blending high and low COTE aggregates to meet TxDOT limit.” In Proc., Green Street, Highways and Development, 125–134. Reston, VA: ASCE.
Siddiqui, M. S., and D. W. Fowler. 2014. “Effect of internal water pressure on the measured coefficient of thermal expansions of concrete.” J. Mater. Civ. Eng. 27 (4): 04014151. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001095.
Siddiqui, M. S., and D. W. Fowler. 2015. “A systematic optimization technique for the coefficient of thermal expansion of Portland cement concrete.” Constr. Build. Mater. 88: 204–211. https://doi.org/10.1016/j.conbuildmat.2015.04.008.
Siddiqui, M. S., and D. W. Fowler. 2017. “Experimental investigation to improve the thermomechanical response of concrete samples subjected to coefficient of thermal expansion testing.” J. Mater. Civ. Eng. 29 (9): 04017144. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001976.
Siddiqui, M. S., Z. Grasley, and D. W. Fowler. 2016. “Internal water pressure development in saturated concrete cylinder subjected to coefficient of thermal expansion tests: Poroelastic model.” Constr. Build. Mater. 112: 996–1004. https://doi.org/10.1016/j.conbuildmat.2016.02.081.
Siddiqui, M. S., M. Rached, and D. W. Fowler. 2014. “Mixture design for minimizing cement content in pavement concrete.” Transp. Res. Rec. 2441 (1): 20–27. https://doi.org/10.3141/2441-04.
Tian, J., and X. Wang. 2009. “Experimental Study on Selecting Aggregates for Concrete Using in Longkaikou Hydroelectric Power Station.” The Research and Progress on Concrete Materials and Temperature Control in Hydraulic Dam. 104–110. Beijing: China Water Power Press.
Yeon, J. H., S. Choi, and M. C. Won. 2009. “Effect of relative humidity on coefficient of thermal expansion of hardened cement paste and concrete.” Transp. Res. Rec. 2113 (1): 83–91. https://doi.org/10.3141/2113-10.
Ying, Z., C. Du, and L. Sun. 2007. “Prediction of concrete elastic modulus based on numerical random aggregate model.” J. Hydraul. Eng. 38 (8): 933–937. https://doi.org/10.3321/j.issn:0559-9350.2007.08.007.
Zhang, Y., H. Chen, Z. Zhang, and L. Jiang. 2011. “Meso-scale study on thermal expansion coefficient of concrete.” J. Build. Mater. 14 (3): 310–316. https://doi.org/10.3969/j.issn.1007-9629.2011.03.005.
Zhang, Z., Y. Zhang, and Z. Song. 2007. “Prediction on thermal expansion coefficient of concrete based on mesomechanics.” Chin. J. Comput. Mech. 24 (6): 806–810. https://doi.org/10.3969/j.issn.1007-4708.2007.06.017.
Zhou, C., B. Huang, and X. Shu. 2013. “Micromechanical model for predicting coefficient of thermal expansion of concrete.” J. Mater. Civ. Eng. 25 (9): 1171–1180. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000663.
Zhou, C., and K. Li. 2012. “Numerical analysis of gas permeability of concrete incorporating recycled aggregate.” Eng. Mech. 29 (12): 201–210. https://doi.org/10.6052/j.issn.1000-4750.2011.05.0270.
Zhou, C., X. Shu, and B. Huang. 2014. “Predicting concrete coefficient of thermal expansion with an improved micromechanical model.” Constr. Build. Mater. 68: 10–16. https://doi.org/10.1016/j.conbuildmat.2014.06.039.
Zhu, X. 2013. “Influence of interfacial zone between asphalt mastic and aggregate on the elastic behavior of asphalt concrete.” Constr. Build. Mater. 49: 797–806. https://doi.org/10.1016/j.conbuildmat.2013.08.072.
Zhu, X., and L. Chen. 2012. “Numerical prediction of elastic modulus of asphalt concrete with imperfect bonding.” Constr. Build. Mater. 35: 45–51. https://doi.org/10.1016/j.conbuildmat.2011.12.059.
Zhu, X., X. Wang, and Y. Yu. 2014. “Micromechanical creep models for asphalt-based multi-phase particle-reinforced composites with viscoelastic imperfect interface.” Int. J. Eng. Sci. 76: 34–46. https://doi.org/10.1016/j.ijengsci.2013.11.011.
Zhu, X., Z. Yang, X. Guo, and W. Chen. 2011. “Modulus prediction of asphalt concrete with imperfect bonding between aggregate-asphalt mastic.” Compos. B Eng. 42 (6): 1404–14111. https://doi.org/10.1016/j.compositesb.2011.05.023.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Apr 7, 2017
Accepted: Jun 4, 2018
Published online: Sep 19, 2018
Published in print: Dec 1, 2018
Discussion open until: Feb 19, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.