Modeling Mechanical Properties of Cement Asphalt Emulsion Mortar with Different Asphalt to Cement Ratios and Temperatures
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 10
Abstract
The compressive strength and elastic modulus of cement asphalt emulsion mortar (CAM) are two fundamental parameters of material design, and their values are highly dependent on asphalt:cement mass ratio (A/C) and temperature. However, there are few quantitative studies about the effect of A/C and temperature on the mechanical properties of CAM. This paper studies the compressive strength and elastic modulus of CAM with varied A/C at different temperatures. A physical and mathematic model is proposed to relate the compressive strength and elastic modulus of CAM to asphalt:cement volume ratio () and temperature. The proposed model calculates the compressive strength (or elastic modulus) of CAM by the compressive strength (or elastic modulus) of cement mortar, , and a parameter . The parameter is related to the rigidity and adhesive ability of asphalt binder, and it has a linear relationship with temperature. The proposed model can accurately predict the mechanical properties of CAM with different and temperatures, and thus it provides a good method to study the mechanical properties of CAM. The limitations of the proposed model are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first author thanks the funding supported from the National Science Foundation of China (51608096) and the Fundamental Research Funds for the Central Universities (DUT17RC(4)16).
References
ASTM. 2008. Standard test method for fundamental transverse, longitudinal, and torsional resonant frequencies of concrete specimens. ASTM C215-08. West Conshohocken, PA: ASTM.
Chinese Railway Specification. 2008. Technical specification of cement asphalt emulsion mortar for CRTSII non-ballast slab track. [In Chinese.] Beijing: China Railway Publishing House.
Deng, D., Q. Tian, Z. Liu, Y. Ai, and Q. Yuan. 2014. “Physical structure of hardened cement asphalt paste for the slab track of high-speed railway.” [In Chinese.] Sci. Sin. Technol. 44 (7): 661–671.
Esveld, C. 2003. “Recent developments in slab track.” Eur. Railway Rev. 9 (2): 81–85.
Fang, L., Q. Yuan, D. Deng, Y. Pan, and Y. Wang. 2017. “Effect of mix parameters on the dynamic mechanical properties of cement asphalt mortar.” J. Mater. Civ. Eng. 29 (8): 04017080. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001913.
Guo, M., Y. Tan, and L. Zhang. 2012. “Effect of filler on glass transition of asphalt mastic.” Adv. Eng. Forum 5: 376–381. https://doi.org/10.4028/www.scientific.net/AEF.5.376.
He, D., J. Xing, G. Guo, F. B. Kong, and Q. Y. Zeng. 2006. “The effect of stiffness and damping of cement asphalt mortar on the vertical vibration of the high-speed train and slab track time-dependent system.” [In Chinese.] J. Railway Sci. Eng. 3 (3): 26–30.
Hu, S., T. Wang, F. Wang, and Z. C. Liu. 2009. “Adsorption behaviour between cement and asphalt emulsion in cement-asphalt mortar.” Adv. Cem. Res. 21 (1): 11–14. https://doi.org/10.1680/adcr.2007.00034.
Hu, S., Y. Zhang, and F. Wang. 2012. “Effect of temperature and pressure on the degradation of cement asphalt mortar exposed to water.” Constr. Build. Mater. 34: 570–574. https://doi.org/10.1016/j.conbuildmat.2012.03.002.
Kong, X., Y. Liu, Y. Zhang, Z. L. Zhang, P. Y. Yan, and Y. Bai. 2014. “Influences of temperature on mechanical properties of cement asphalt mortars.” Mater. Struct. 47 (1–2): 285–292. https://doi.org/10.1617/s11527-013-0060-2.
Li, G., Y. Zhao, S. S. Pang, and W. Huang. 1998. “Experimental study of cement-asphalt emulsion composite.” Cem. Concr. Res. 28 (5): 635–641. https://doi.org/10.1016/S0008-8846(98)00038-6.
Li, W., X. Zhu, J. Hong, W. She, P. Wang, and W. Zuo. 2015. “Effect of anionic emulsifier on cement hydration and its interaction mechanism.” Constr. Build. Mater. 93: 1003–1011. https://doi.org/10.1016/j.conbuildmat.2015.05.053.
Liu, B., and D. Liang. 2017. “Effect of mass ratio of asphalt to cement on the properties of cement modified asphalt emulsion mortar.” Constr. Build. Mater. 134: 39–43. https://doi.org/10.1016/j.conbuildmat.2016.12.137.
Lu, C. T., M. F. Kuo, and D. H. Shen. 2009. “Composition and reaction mechanism of cement-asphalt mastic.” Constr. Build. Mater. 23 (7): 2580–2585. https://doi.org/10.1016/j.conbuildmat.2009.02.014.
Ministry of Communications of PR China. 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. [In Chinese.] JTG E20-2011. Beijing: China Communications Press.
Nicoleau, L., and A. Nonat. 2016. “A new view on the kinetics of tricalcium silicate hydration.” Cem. Concr. Res. 86: 1–11. https://doi.org/10.1016/j.cemconres.2016.04.009.
Ouyang, J., B. Han, Y. Cao, W. Zhou, W. Li, and S. P. Shah. 2016a. “The role and interaction of superplasticizer and emulsifier in fresh cement asphalt emulsion paste through rheology study.” Constr. Build. Mater. 125: 643–653. https://doi.org/10.1016/j.conbuildmat.2016.08.085.
Ouyang, J., and Y. Tan. 2015. “Rheology of fresh cement asphalt emulsion pastes.” Constr. Build. Mater. 80: 236–243. https://doi.org/10.1016/j.conbuildmat.2015.01.078.
Ouyang, J., Y. Tan, D. J. Corr, and S. P. Shah. 2016b. “Investigation on the mixing stability of asphalt emulsion with cement through viscosity.” J. Mater. Civ. Eng. 28 (12): 04016149. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001657.
Ouyang, J., Y. Tan, D. J. Corr, and S. P. Shah. 2016c. “The thixotropic behavior of fresh cement asphalt emulsion paste.” Constr. Build. Mater. 114: 906–912. https://doi.org/10.1016/j.conbuildmat.2016.04.024.
Ouyang, J., Y. Tan, D. J. Corr, and S. P. Shah. 2017. “Viscosity prediction of fresh cement asphalt emulsion pastes.” Mater. Struct. 50 (1): 59. https://doi.org/10.1617/s11527-016-0897-2.
Ouyang, J., Y. Tan, Y. Li, and J. Zhao. 2015. “Demulsification process of asphalt emulsion in fresh cement-asphalt emulsion paste.” Mater. Struct. 48 (12): 3875–3883. https://doi.org/10.1617/s11527-014-0446-9.
Peng, J., D. Deng, Q. Yuan, Z. Liu, and L. Fang. 2014. “Study of the rheological properties of fresh cement emulsified asphalt paste.” Constr. Build. Mater. 66 (15): 348–355. https://doi.org/10.1016/j.conbuildmat.2014.05.023.
Qiang, W., Y. Peiyu, A. Ruhan, Y. Jinbo, and K. Xiangming. 2011. “Strength mechanism of cement-asphalt mortar.” J. Mater. Civ. Eng. 23 (9): 1353–1359. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000301.
Rutherford, T., Z. Wang, X. Shu, B. Huang, and D. Clarke. 2014. “Laboratory investigation into mechanical properties of cement emulsified asphalt mortar.” Constr. Build. Mater. 65: 76–83. https://doi.org/10.1016/j.conbuildmat.2014.04.113.
Song, H., J. Do, and Y. Soh. 2006. “Feasibility study of asphalt-modified mortars using asphalt emulsion.” Constr. Build. Mater. 20 (5): 332–337. https://doi.org/10.1016/j.conbuildmat.2005.01.027.
Tan, Y., and M. Guo. 2014. “Interfacial thickness and interaction between asphalt and mineral fillers.” Mater. Struct. 47 (4): 605–614. https://doi.org/10.1617/s11527-013-0083-8.
Tan, Y., J. Ouyang, J. Lv, and Y. Li. 2013. “Effect of emulsifier on cement hydration in cement asphalt mortar.” Constr. Build. Mater. 47: 159–164. https://doi.org/10.1016/j.conbuildmat.2013.04.044.
Taylor, H. F. 1997. Cement chemistry, 113–115. 2nd ed. London: Thomas Telford.
Tian, Q., Q. Yuan, L. Fang, Y. Wang, Z. Liu, and D. Deng. 2017. “Estimation of elastic modulus of cement asphalt binder with high content of asphalt.” Constr. Build. Mater. 133: 98–106. https://doi.org/10.1016/j.conbuildmat.2016.12.003.
Wang, F., Z. Liu, T. Wang, and S. Hu. 2010. “Temperature stability of compressive strength of cement asphalt mortar.” ACI Mater. J. 107 (1): 27–30.
Wang, J., Y. Chen, X. Fan, and J. Z. Li. 2015. “Effects of strain rate and confining pressure on compressive behavior of cement asphalt mortar.” Mater. Des. (1980-2015) 65: 772–779. https://doi.org/10.1016/j.matdes.2014.10.010.
Wang, J., X. Wu, X. Fan, and Y. R. Chen. 2016. “Stress-strain model of cement asphalt mortar subjected to temperature and loading rate.” Constr. Build. Mater. 111: 164–174. https://doi.org/10.1016/j.conbuildmat.2016.02.080.
Wang, Y., Q. Yuan, D. Deng, and Z. Liu. 2017. “Modeling compressive strength of cement asphalt composite based on pore size distribution.” Constr. Build. Mater. 150: 714–722. https://doi.org/10.1016/j.conbuildmat.2017.06.049.
Yuan, Q., W. Liu, Y. Pan, D. Deng, and Z. Liu. 2015. “Characterization of cement asphalt mortar for slab track by dynamic mechanical thermoanalysis.” J. Mater. Civ. Eng. 28 (3): 04015154. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001401.
Zhang, Y., X. Kong, S. Hou, Y. Liu, and S. Han. 2012. “Study on the rheological properties of fresh cement asphalt paste.” Constr. Build. Mater. 27 (1): 534–544. https://doi.org/10.1016/j.conbuildmat.2011.07.010.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jan 7, 2018
Accepted: Apr 25, 2018
Published online: Jul 23, 2018
Published in print: Oct 1, 2018
Discussion open until: Dec 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.