Fatigue Performance Prediction of Asphalt Pavement Based on Semicircular Bending Test at Intermediate Temperature
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 9
Abstract
The objective of this study is to correlate asphalt mixtures’ crack resistance with their in situ cracking performance. Ten mixtures were obtained from a full-scale experiment at the Federal Highway Administration (FHWA) Accelerated Loading Facility (ALF), which were constructed with various contents of reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS), two warm-mix technologies, and two asphalt binder grades. The mixtures’ linear viscoelastic properties were assessed through dynamic modulus testing. Fracture resistance was characterized by the critical strain energy release rate (), which was obtained from semicircular bending (SCB) tests at intermediate temperature. The increase in RAP/RAS content was found to enhance mixture’s stiffness while reducing the mix crack resistance. No significant difference in terms of crack resistance was observed between the two used warm-mix technologies. The use of a soft binder was effective in improving the crack resistance of mixtures with a high RAP content. The generic fatigue model from the literature did not correlate well with the ALF test results; modification was achieved by introducing as an indicator of crack resistance into the model form. The resulting -based model exhibited an adequate correlation with field performance measured by the ALF test results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented herein is part of Transportation Pooled Fund TPF-5(294) “Develop Mix Design and Analysis Procedures for Asphalt Mixtures Containing High-RAP and/or RAS Contents.” The authors would like to acknowledge the support of the Federal Highway Administration and the Louisiana Transportation Research Center. The assistance of Dr. Jack Youtcheff, Dr. Nelson Gibson, and Mr. Xinjun Li in obtaining field data of ALF test lanes is greatly appreciated.
References
AASHTO. 2015a. Standard method of test for determining the dynamic modulus and flow number for hot mix asphalt (HMA) using the asphalt mixture performance tester (AMPT). AASHTO TP79-15. Washington, DC: AASHTO.
AASHTO. 2015b. Standard practice for mixture conditioning of hot mix asphalt. AASHTO R30-02. Washington, DC: AASHTO.
Anderson, T. L. 2017. Fracture mechanics: Fundamentals and applications. 4th ed. Boca Raton, FL: CRC Press.
ASTM. 2016. Standard test method for evaluation of asphalt mixture cracking resistance using the semi-circular bend (SCB) test at intermediate temperatures. ASTM D8044. West Conshohocken, PA: ASTM.
Biligiri, K. P., S. Said, and H. Hakim. 2012. “Asphalt mixture’s crack propagation assessment using semi-circular bending tests.” Int. J. Pavement Res. Technol. 5 (4): 209–217.
Cao, W., A. Norouzi, and Y. R. Kim. 2016. “Application of viscoelastic continuum damage approach to predict fatigue performance of Binzhou perpetual pavements.” J. Traffic Transp. Eng. 3 (2): 104–115. https://doi.org/10.1016/j.jtte.2016.03.002.
Chong, K. P., and M. D. Kuruppu. 1984. “New specimens for fracture toughness determination for rock and other materials.” Int. J. Fract. 26 (2): R59–R62. https://doi.org/10.1007/BF01157555.
Cooper, S. B., Jr., L. N. Mohammad, and M. Elseifi. 2014. “Laboratory performance of asphalt mixtures containing recycled asphalt shingles.” Transp. Res. Rec. 2445 (1): 94–102. https://doi.org/10.3141/2445-11.
Cooper, S. B., Jr., I. Negulescu, S. S. Balamurugan, L. N. Mohammad, and W. H. Daly. 2015. “Binder composition and intermediate temperature cracking performance of asphalt mixtures containing RAS.” Road Mater. Pavement Des. 16 (S2): 275–295. https://doi.org/10.1080/14680629.2015.1077013.
Cooper, S. B., Jr., I. Negulescu, S. S. Balamurugan, L. N. Mohammad, W. H. Daly, and G. L. Baumgardner. 2017. “Asphalt mixtures containing RAS and/or RAP: Relationships amongst binder composition analysis and mixture intermediate temperature cracking performance.” Supplement, Road Mater. Pavement Des. 18 (S1): 209–234. https://doi.org/10.1080/14680629.2016.1266758.
Elseifi, M. A., L. N. Mohammad, H. Ying, and S. Cooper III. 2012. “Modeling and evaluation of the cracking resistance of asphalt mixtures using the semi-circular bending test at intermediate temperatures.” Supplement, Road Mater. Pavement Des. 13 (S1): 124–139. https://doi.org/10.1080/14680629.2012.657035.
Eslaminia, M., S. Thirunavukkarasu, M. N. Guddati, and Y. R. Kim. 2012. “Accelerated pavement performance modeling using layered viscoelastic analysis.” In Proc., 7th RILEM Int. Conf. on Cracking in Pavements, 497–506. Dordrecht, Netherlands: Springer.
FHWA (Federal Highway Administration). 2018. Advance use of recycled asphalt in flexible pavement infrastructure: Develop and deploy framework for proper use and evaluation of recycled asphalt in asphalt mixtures. FHWA-PROJ-11-0070. Washington, DC: FHWA.
Kendall, M. 1938. “A new measure of rank correlation.” Biometrika 30 (1–2): 81–93. https://doi.org/10.1093/biomet/30.1-2.81.
Kim, M., L. N. Mohammad, and M. A. Elseifi. 2012. “Characterization of fracture properties of asphalt mixtures as measured by semi-circular bend test and indirect tension test.” Transp. Res. Rec. 2296 (1): 115–124. https://doi.org/10.3141/2296-12.
Kim, M., L. N. Mohammad, P. Phaltane, and M. A. Elseifi. 2017. “Density and SCB measured fracture resistance of temperature segregated asphalt mixtures.” Int. J. Pavement Res. Technol. 10 (2): 112–121. https://doi.org/10.1016/j.ijprt.2017.01.004.
LaDOTD (Louisiana Department of Transportation and Development). 2016. Louisiana standard specifications for roads and bridges. Baton Rouge, LA: LaDOTD.
Li, X., and N. Gibson. 2016. “Comparison of asphalt mixture performance tester fatigue characteristics with full-scale pavement cracking for recycled and warm-mix asphalts.” Transp. Res. Rec. 2576: 100–108. https://doi.org/10.3141/2576-11.
Mohammad, L. N., M. Kim, and H. Challa. 2016. Development of performance-based specifications for Louisiana asphalt mixtures. Baton Rouge, LA: Louisiana Transportation Research Center.
Mohammad, L. N., Z. Wu, and M. A. Aglan. 2004. “Characterization of fracture and fatigue resistance on recycled polymer-modified asphalt pavements.” In Proc., 5th RILEM Int. Conf. on Cracking in Pavements, 375–382. Limoges, France: RILEM.
Mull, M. A., K. Stuart, and A. Yehia. 2002. “Fracture resistance characterization of chemically modified crumb rubber asphalt pavement.” J. Mater. Sci. 37 (3): 557–566. https://doi.org/10.1023/A:1013721708572.
Park, H.-J., M. Eslaminia, and Y. R. Kim. 2014. “Mechanistic evaluation of cracking in in-service asphalt pavements.” Mater. Struct. 47 (8): 1339–1358. https://doi.org/10.1617/s11527-014-0307-6.
Raghavendra, A., M. S. Medeiros Jr., M. M. Hassan, L. N. Mohammad, and W. B. King Jr. 2016. “Laboratory and construction evaluation of warm-mix asphalt.” J. Mater. Civ. Eng. 28 (7): 04016023. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001506.
Rice, J. R. 1968. “A path independent integral and the approximate analysis of strain concentration by notches and cracks.” J. Appl. Mech. 35 (2): 379–386. https://doi.org/10.1115/1.3601206.
Wu, Z., L. N. Mohammad, L. B. Wang, and M. A. Mull. 2005. “Fracture resistance characterization of Superpave mixtures using the semi-circular bending test.” J. ASTM Int. 2 (3): 1–15. https://doi.org/10.1520/JAI12264.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 8, 2017
Accepted: Mar 30, 2018
Published online: Jun 29, 2018
Published in print: Sep 1, 2018
Discussion open until: Nov 29, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.