Photoluminescent Road Coatings for Open-Graded and Dense-Graded Asphalts: Theoretical and Experimental Investigation
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 8
Abstract
Road safety builds on traffic and driver–infrastructure interaction: nighttime visibility represents a key-aspect of this complex interaction. Therefore, providing an adequate road lighting system and improving drivers’ visibility in nighttime conditions is vital. In this sense, photoluminescent paints for pavements can improve road safety in terms of visibility. This study models photoluminescent phenomenon by referring to dense-graded friction courses (DGFC) and open-graded friction courses (OGFC), and evaluates the effects due to season. Measurements, based on the photometry technique, were carried out in the laboratory on cores. The photoluminescent phenomenon was investigated in terms of charge and discharge time linked to decay phenomena and modeled as a function of pavement type and paint treatments. Results show that photoluminescent performance depends on the luminance time and volumetric characteristics of bituminous mixtures. Results can benefit both researchers and practitioners and can allow optimizing painting treatments for different bituminous mixtures.
Get full access to this article
View all available purchase options and get full access to this article.
References
AGO (Australian Greenhouse Office). 2005. Assessing lighting savings. Canberra, ACT, Australia: AGO.
Andrady, A. L. 1997. Pavement marking materials: Assessing environment-friendly performance. Washington, DC: Transportation Research Board.
Andre, J., and D. A. Owens. 2001. “The twilight envelope: A user-centered approach to describing roadway illumination at night.” Hum. Factors 43 (4): 620–630. https://doi.org/10.1518/001872001775870331.
Austin, R. L., and R. J. Schultz. 2009. Guide to retroreflection safety principles and retroreflective measurements. San Diego, CA: RoadVista.
Bacero, R., D. To, J. P. Arista, M. K. Dela Cruz, J. P. Villaneva, and F. A. Uy. 2015. “Evaluation of strontium aluminate in traffic paint pavement markings for rural and unilluminated roads.” In Proc., 11th Int. Conf. of Eastern Asia Society for Transportation Studies, EASTS 2015. Cebu, Philippines: Eastern Asia Society for Transportation Studies.
Bahar, G., M. Masliah, T. Erwin, E. Tan, and E. Hauer. 2006. Pavement marking materials and markers: Real-world relationship between retroreflectivity and safety over time. Washington, DC: Transportation Research Board.
Boscaino, G., and F. G. Praticò. 2001. “Classification et inventaire des indicateurs de la texture superficielle des revetements des chausses [A classification of surface texture indices of pavement surfaces].” Buletin des Laboratoires des Ponts et Chaussees 234: 17–34.
British Standard. 2008. Road marking materials: Road marking performance for road users. EN 1436. London, UK: British Standard.
British Standard. 2011a. Light and lighting: Lighting of work places: Part 1: Indoor work places. EN 12464-1. London, UK: British Standard.
British Standard. 2011b. Road and airfield surface characteristics: Test methods: Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test. EN 13036-4. London, UK: British Standard.
Bullough, J. D., N. P. Skinner, J. D. Snyder, and U. C. Besenecker. 2014. Nighttime highway construction illumination. Albany, NY: NYS Dept. of Transportation.
Bunning, E., and I. Moser. 1969. “Interference of moonlight with the photoperiodic measurement of time by plants, and their adaptive reaction.” Proc. Natl. Acad. Sci. U.S.A. 62 (4): 1018–1022. https://doi.org/10.1073/pnas.62.4.1018.
Cafiso, S., and C. D’Agostino. 2016. “Assessing the stochastic variability of the benefit-cost ratio in roadway safety management.” Accid. Anal. Prev. 93: 189–197. https://doi.org/10.1016/j.aap.2016.04.027.
Deng, L., L. Chen, and M. S. Rea. 2005. “An evaluation of the Hunt94 color appearance model under different light sources at low photopic to low mesopic light levels.” Color Res. Appl. 30 (2): 107–117. https://doi.org/10.1002/col.20088.
Gates, J. T., G. H. Hawkins, and E. R. Rose. 2003. Effective pavement marking materials and applications for portland cement concrete roadways 2. Texas Transportation Institute.
Giuliani, F., and F. Autelitano. 2014. “Revⓔtements routiers photoluminescents: étude expérimentale préliminaire en laboratoire [Photoluminescent road surface dressing: a first laboratory experimental investigation].” Matériaux Techniques 102 (6–7): 603 https://doi.org/10.1051/mattech/2014030.
Harlow, A. 2005. Skid resistance and pavement marking materials. New Zealand Road Markers Federation.
ISO. 1997. Characterization of pavement texture by use of surface profiles. Part 1: Determination of mean profile depth. ISO 13473-1. Vernier, Geneva, Switzerland: ISO.
ISO. 2002. Characterization of pavement texture by use of surface profiles. Part 3: Specification and classification of profilometers. ISO 13473-3. Vernier, Geneva, Switzerland: ISO.
ISO. 2008. Characterization of pavement texture by use of surface profiles. Part 4: Spectral analysis of surface profiles. ISO/CD TS 13473-4. Vernier, Geneva, Switzerland: ISO.
Jiang, Y. 2008. Durability and retro-reflectivity of pavement markings (synthesis study).
Khan, M., S. Senadheera, D. Gransberg, and R. Stemprok. 1999. “Influence of pavement surface characteristics on nighttime visibility of objects.” Transp. Res. Rec. 1692: 39–48. https://doi.org/10.3141/1692-06.
Migletz, J., and J. Graham. 2002. Long-term pavement marking practices: A synthesis of highway practice. Washington, DC: Transport Research Board of the National Academies.
MIT (Ministero delle Infrastrutture e dei Trasporti). 1992. Ministero delle Infrastrutture e dei Trasporti, D. Lgs. n. 285 e ss.mm.ii. Codice della Strada, Art. 2.
Okada, J. 2015. “Lotus ceramics for counteracting urban heat island effects.” In Eco-efficient materials for mitigating building cooling needs design, properties and applications, edited by F. Pacheco-Torgal, J. Labrincha, L. Cabeza, and C.-G. Granqvist, 195–213. Amsterdam, Netherlands: Elsevier.
Oleari, C. 2015. Standard colorimetry: Definitions, algorithms and software. Hoboken, NJ: Wiley.
OSHA (Occupational Safety and Health Administration). 2009. Illumination: 1926.56, 2009, regulations (standards: 29 CFR). Washington, DC: US Dept. of Labor.
PD (Paints Directive). 2004. 2004/42/EC. Brussels, Belgium: Official Journal of the European Union.
Pears, A. 1998. “Appliance technologies and scope for emission reduction.” In Chap. 7 in Strategic study of household energy and greenhouse issues, 61. Sustainable Solutions Pty.
Praticò, F., and A. Moro. 2011. “In-lab and on-site measurements of hot mix asphalt density: convergence and divergence hypotheses.” Constr. Build. Mater. 25 (2): 1065–1071. https://doi.org/10.1016/j.conbuildmat.2010.06.071.
Praticò, F., R. Vaiana, and R. Fedele. 2014. “A study on the dependence of PEMs acoustic properties on incidence angle.” Int. J. Pavement Eng. 16 (7): 632–645. https://doi.org/10.1080/10298436.2014.943215.
Praticò, F., R. Vaiana, and M. Giunta. 2013. “Pavement sustainability: Permeable wearing courses by recycling porous European mixes.” J. Archit. Eng. 19 (3): 186–192. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000127.
Praticò, F. G., and A. Astolfi. 2017. “A new and simplified approach to assess the pavement surface micro- and macrotexture.” Constr. Build. Mater. 25 (2): 476–483. https://doi.org/10.1016/j.conbuildmat.2017.05.050.
Praticò, F. G., S. Noto, and A. Moro. 2016. “Optimisation of photoluminescent painting treatments on different surface layers.” In Proc., 4th Chinese-European Workshop on Functional Pavement Design, CEW 2016, edited by S. Erkens, X. Liu, K. Anupam, and T. Yiqiu. London, UK: Taylor & Francis Group.
Praticò, F. G., and R. Vaiana. 2013. “A study on volumetric versus surface properties of wearing courses.” Constr. Build. Mater. 101 (1): 766–775. https://doi.org/10.1016/j.conbuildmat.2012.09.021.
Praticò, F. G., and R. Vaiana. 2015. “A study on the relationship between mean texture depth and mean profile depth of asphalt pavements.” Constr. Build. Mater. 101 (1): 72–79. https://doi.org/10.1016/j.conbuildmat.2015.10.021.
Praticò, F. G., R. Vaiana, and T. Iuele. 2015. “Macrotexture modeling and experimental validation for pavement surface treatments.” Constr. Build. Mater. 95 (Oct): 658–666. https://doi.org/10.1016/j.conbuildmat.2015.07.061.
Rea, M. S., J. D. Bullough, J. P. Freyssinier, and A. Bierman. 2004. “A proposed unified system of photometry.” Light. Res. Technol. 36 (2): 85–109. https://doi.org/10.1191/1365782804li114oa.
Riccardi, C., A. Cannone Falchetto, M. Losa, and M. Wistuba. 2016. “Back-calculation method for determining the maximum RAP content in stone matrix asphalt mixtures with good fatigue performance based on asphalt mortar tests.” Constr. Build. Mater. 118 (Aug): 364–372. https://doi.org/10.1016/j.conbuildmat.2016.05.086.
Rojas-Hernandez, R. E., F. Rubio-Marcos, M. Á. Rodriguez, and J. F. Fernandez. 2017. “Long lasting phosphors: , Dy as the most studied material.” Renewable Sustainable Energy Rev. 81 (2): 2759–2770. https://doi.org/10.1016/j.rser.2017.06.081.
Santamouris, M. 2013. “Using cool pavements as a mitigation strategy to fight urban heat island. A review of the actual developments.” Renewable Sustainable Energy Rev. 26 (Oct): 224–240. https://doi.org/10.1016/j.rser.2013.05.047.
Schlyter, P. 2010. “Radiometry and photometry in astronomy.” Accessed April, 2018. http://stjarnhimlen.se/comp/radfaq.html.
UNI (Ente Italiano di Normazione). 2012. Illuminazione stradale: Selezione delle categorie illuminotecniche. UNI 11248. Milano, Italy: UNI.
UNI (Ente Italiano di Normazione). 2016. Illuminazione stradale: Parte 2: Requisiti prestazionali. UNI EN 13201-2. Milano, Italy: UNI.
Waynant, R. W., and M. N. Ediger. 2000. Electro-optics handbook. 2nd ed. New York: McGraw-Hill.
Zitoun, D., L. Bernaud, and A. Manteghetti. 2009. “Microwave synthesis of a long-lasting phosphor.” J. Chem. Educ. 86 (1): 72. https://doi.org/10.1021/ed086p72.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Oct 12, 2017
Accepted: Jan 31, 2018
Published online: May 29, 2018
Published in print: Aug 1, 2018
Discussion open until: Oct 29, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.