Closure to “Influence of Interface Characteristics on the Shear Performance between Open-Graded Friction Course and Underlying Layer” by Weimin Song, Xiang Shu, Baoshan Huang, and Mark Woods
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Materials in Civil Engineering
Volume 30, Issue 7
MT.1943-5533.0002342/asset/09834f04-1ad8-429d-b3a3-f59d396793c9/assets/(asce)mt.1943-5533.0002342.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. 2014. Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage. AASHTO T283. Washington, DC: AASHTO.
Alvarez, A. E., A. E. Martin, C. K. Estakhri, J. W. Button, C. J. Glover, and C. J. Jung. 2006. Synthesis of current practice on the design, construction, and maintenance of porous friction courses. College Station, TX: Texas Transportation Institute—Texas A&M Univ.
Arambula-Mercado, E., R. A. Hill, S. Caro, L. Manrique, E. S. Park, and E. Fernando. 2016. Understanding mechanisms of raveling to extend open graded friction course (OGFC) service life. College Station, TX: Texas A&M Transportation Institute.
Aschenbrener, T. 1995. “Evaluation of Hamburg wheel-tracking device to predict moisture damage in hot-mix asphalt.” Transp. Res. Rec. 1492: 193–201.
Canestrari, F., F. Cardone, A. Graziani, F. A. Santagata, and H. U. Bahia. 2010. “Adhesive and cohesive properties of asphalt-aggregate systems subjected to moisture damage.” Supplement, Road Mater. Pavement Des. 11 (S1): 11–32. https://doi.org/10.1080/14680629.2010.9690325.
Caro, S., E. Masad, A. Bhasin, and D. N. Little. 2008. “Moisture susceptibility of asphalt mixtures. Part I: Mechanisms.” Int. J. Pavement Eng. 9 (2): 81–98. https://doi.org/10.1080/10298430701792128.
Chen, X., and B. Huang. 2008. “Evaluation of moisture damage in hot mix asphalt using simple performance and Superpave indirect tensile tests.” Constr. Build. Mater. 22 (9): 1950–1962. https://doi.org/10.1016/j.conbuildmat.2007.07.014.
Cheng, D., D. N. Little, R. L. Lytton, and J. C. Holste. 2002. “Use of surface free energy properties of the asphalt-aggregate system to predict moisture damage potential (with discussion).” J. Assoc. Asphalt Paving Technol. 71: 59–88.
Hefer, A. W., D. N. Little, and R. L. Lytton. 2005. “A synthesis of theories and mechanisms of bitumen-aggregate adhesion including recent advances in quantifying the effects of water.” J. Assoc. Asphalt Paving Technol. 74: 139–196.
Hicks, R. G. 1991. Moisture damage in asphalt concrete. Washington, DC: Transportation Research Board.
Huang, B., L. N. Mohammad, A. Raghavendra, and C. Abadie. 1999. “Fundamentals of permeability in asphalt mixtures.” In Proc., Annual Meeting of the Association of Asphalt Paving Technologist. Lino Lakes, MN: Association of Asphalt Paving Technology.
Huang, B., X. Shu, Q. Dong, and J. Shen. 2010. “Laboratory evaluation of moisture susceptibility of hot-mix asphalt containing cementitious fillers.” J. Mater. Civ. Eng. 22 (7): 667–673. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000064.
Kakar, M. R., M. O. Hamzah, and J. Valentin. 2015. “A review on moisture damages of hot and warm mix asphalt and related investigations.” J. Cleaner Prod. 99: 39–58. https://doi.org/10.1016/j.jclepro.2015.03.028.
Kanitpong, K., and H. U. Bahia. 2003. “Role of adhesion and thin film tackiness of asphalt binders in moisture damage of HMA (with discussion).” J. Assoc. Asphalt Paving Technol. 72: 502–528.
Kringos, N., A. Scarpas, and C. Kasbergen. 2007. “Three dimensional elasto-visco-plastic finite element model for combined physical-mechanical moisture induced damage in asphaltic mixes.” In Proc., Asphalt Paving Technologists Technical Sessions, 495–524. Lino Lakes, MN: Association of Asphalt Paving Technology.
Lu, Q., and J. Harvey. 2011. “Laboratory evaluation of open-graded asphalt mixes with small aggregates and various binders and additives.” Transp. Res. Rec. 2209: 61–69. https://doi.org/10.3141/2209-08.
Mallick, R. B., R. Pelland, and F. Hugo. 2005. “Use of accelerated loading equipment for determination of long term moisture susceptibility of hot mix asphalt.” Int. J. Pavement Eng. 6 (2): 125–136. https://doi.org/10.1080/10298430500158984.
Masad, E., A. Castelblanco, and B. Birgisson. 2005. “Effects of air void size distribution, pore pressure, and bond energy on moisture damage.” J. Test. Eval. 34 (1): 15–23.
NAPA (National Asphalt Pavement Association). 2002. Design, construction, and maintenance of open-graded asphalt friction courses. Lanham, MD: NAPA.
Raposeiras, A., D. Castro-Fresno, A. Vega-Zamanillo, and J. Rodriguez-Hernandez. 2013. “Test methods and influential factors for analysis of bonding between bituminous pavement layers.” Constr. Build. Mater. 43: 372–381. https://doi.org/10.1016/j.conbuildmat.2013.02.011.
Shu, X., and B. Huang. 2014. “Recycling of waste tire rubber in asphalt and portland cement concrete: An overview.” Constr. Build. Mater. 67: 217–224. https://doi.org/10.1016/j.conbuildmat.2013.11.027.
Shu, X., B. Huang, E. D. Shrum, and X. Jia. 2012. “Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP.” Constr. Build. Mater. 35: 125–130. https://doi.org/10.1016/j.conbuildmat.2012.02.095.
Song, W., X. Shu, B. Huang, and M. Woods. 2015. “Factors affecting shear strength between open-graded friction course and underlying layer.” Constr. Build. Mater. 101: 527–535. https://doi.org/10.1016/j.conbuildmat.2015.10.036.
Song, W., X. Shu, B. Huang, and M. Woods. 2017. “Influence of interface characteristics on the shear performance between open-graded friction course and underlying layer.” J. Mater. Civ. Eng. 29 (8): 04017077. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001907.
Suresha, S., G. Varghese, and A. R. Shankar. 2009. “A comparative study on properties of porous friction course mixes with neat bitumen and modified binders.” Constr. Build. Mater. 23 (3): 1211–1217. https://doi.org/10.1016/j.conbuildmat.2008.08.008.
Terrel, R. L., and S. Al-Swailmi. 1993. “The role of pessimum voids concept in understanding moisture damage to asphalt concrete mixtures.” Transp. Res. Rec. 1386: 31–37.
Terrel, R. L., and S. Al-Swailmi. 1994. Water sensitivity of asphalt-aggregate mixes: Test selection. Corvallis, OR: Oregon State Univ.
Wang, J., F. Xiao, Z. Chen, X. Li, and S. Amirkhanian. 2017. “Application of tack coat in pavement engineering.” Constr. Build. Mater. 152: 856–871. https://doi.org/10.1016/j.conbuildmat.2017.07.056.
Xiao, F., D. A. Herndon, S. Amirkhanian, and L. He. 2015. “Aggregate gradations on moisture and rutting resistances of open graded friction course mixtures.” Constr. Build. Mater. 85: 127–135. https://doi.org/10.1016/j.conbuildmat.2015.03.095.
Zhang, J., G. D. Airey, and J. R. Grenfell. 2016. “Experimental evaluation of cohesive and adhesive bond strength and fracture energy of bitumen-aggregate systems.” Mater. Struct. 49 (7): 2653–2667. https://doi.org/10.1617/s11527-015-0674-7.
Zhao, S., B. Huang, X. Shu, and P. Ye. 2014. “Laboratory investigation of biochar-modified asphalt mixture.” Transp. Res. Rec. 2445: 56–63. https://doi.org/10.3141/2445-07.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 30 • Issue 7 • July 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jan 4, 2018
Accepted: Jan 19, 2018
Published online: Apr 30, 2018
Published in print: Jul 1, 2018
Discussion open until: Sep 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.