Application of Cylindrical Cavity Expansion in MCC Model to a Sensitive Clay under Consolidation
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 8
Abstract
This paper presents expressions for the principal effective stresses generated around a cylindrical cavity expanded in plane strain and undrained conditions in modified Cam-clay (MCC). The assumption made in the present analysis is that Poisson’s ratio, , remains constant throughout the shearing process. Theoretical expressions are first applied to the simulation of two cylindrical cavity expansion tests in normally consolidated remolded Boston blue clay modeled as MCC. Thereafter, the paper analyzes field test results obtained by means of pressuremeter tests in a sensitive clay of Quebec. Effective stress paths, derived from application of Palmer’s total stress approach and the measured pore water pressures, are compared with theoretical curves obtained by assuming that the sensitive clay obeys an overconsolidated MCC model. Shear stress–shear strain curves deduced from Palmer’s approach are compared with the theoretically derived MCC relationships.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors express their gratitude to the Natural Sciences and Engineering Research Council of Canada for the financial support received in this study.
References
Baguelin, F., J. F. Jézéquel, and D. H. Shields. 1978. The pressuremeter and foundation engineering. Clausthal, Germany: Trans Tech Publications.
Banerjee, P. K., A. S. Kumbhojkar, and N. B. Yousif. 1988. “Finite element analysis of the stability of vertical cut using an anisotropical soil model.” Can. Geotech. J. 25 (1): 119–127. https://doi.org/10.1139/t88-012.
Banerjee, P. K., and N. B. Yousif. 1986. “A plasticity model for the mechanical behaviour of anisotropically consolidated clay.” Int. J. Numer. Anal. Methods Geomech. 10 (5): 521–541. https://doi.org/10.1002/nag.1610100505.
Cao, L., C. I. Teh, and M.-F. Chang. 2001. “Undrained cavity expansion in modified Cam clay. I: Theoretical analysis.” Géotechnique 51 (4): 323–334. https://doi.org/10.1680/geot.2001.51.4.323.
Chen, S. L., and Y. N. Abousleiman. 2012. “Exact undrained elasto-plastic solution for cylindrical cavity expansion in modified Cam clay.” Géotechnique 62 (5): 447–456. https://doi.org/10.1680/geot.11.P.027.
Dafalias, Y. F. 1987. “An anisotropic critical state clay plasticity model.” In Vol. 1 of Proc., 2nd Int. Conf. on Constitutive Laws Engineering Materials Theory and Applications, 513–521. Tucson, AZ: Univ. of Arizona and the Rensselaer Polytecnic Institute.
Dafalias, Y. F., M. T. Manzari, and M. Akaishi. 2002. “A simple anisotropic clay plasticity model.” Mech. Res. Commun. 29 (4): 241–245. https://doi.org/10.1016/S0093-6413(02)00252-5.
Dafalias, Y. F., M. T. Manzari, and A. G. Papadimitriou. 2006. “SANICLAY: Simple anisotropic clay plasticity model.” Int. J. Numer. Anal. Methods Geomech. 30 (12): 1231–1257. https://doi.org/10.1002/nag.524.
Felio, G. Y., and J. L. Briaud. 1986. “Conventional parameters from pressuremeter test data: Review of existing methods.” In Proc., 2nd Int. Symp. on Pressuremeter and Its Marine Applications ASTM STP950, 265–282. West Conshohocken, PA: ASTM.
Gens, A., and D. Potts. 1988. “Critical state models in computational geomechanics.” Eng. Comput. 5 (3): 178–197. https://doi.org/10.1108/eb023736.
Hamouche, K. K., S. Leroueil, M. Roy, and A. J. Lutenegger. 1995. “In situ evaluation of in eastern Canada clays.” Can. Geotech. J. 32 (4): 677–688. https://doi.org/10.1139/t95-067.
Lacasse, S., M. Jamiolkowski, R. Lancellotta, and T. Lunne. 1981. “In situ characteristics of two Norwegian clays.” In Vol. 2 of Proc., 10th Int. Conf. on Soil Mechanics and Foundation Engineering, 507–511. Rotterdam, Netherlands: A.A. Balkema.
Mitchell, R. J. 1970. “On the yielding and mechanical strength of Leda clays.” Can. Geotech. J. 7 (2): 292–312. https://doi.org/10.1139/t70-036.
Monnet, J. 2007. “Numerical validation of an elastoplastic formulation of the conventional limit pressure measured with the pressuremeter test in cohesive soil.” J. Geotech. Geoenviron. Eng. 133 (9): 1119–1127. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:9(1119).
Palmer, A. C. 1972. “Undrained plane strain expansion of a cylindrical cavity in clay: A simple interpretation of the pressuremeter test.” Géotechnique 22 (3): 451–457. https://doi.org/10.1680/geot.1972.22.3.451.
Randolph, M. F., J. P. Carter, and C. P. Wroth. 1979. “Driven piles in clay-the effect of installation and subsequent consolidation.” Géotechnique 29 (4): 361–393. https://doi.org/10.1680/geot.1979.29.4.361.
Roy, M., R. Juneau, P. LaRochelle, and F. Tavenas. 1975. “In situ measurement of the properties of sensitive clays by pressuremeter tests.” Vol. 1 of Proc., ASCE Specialty Conf. on In Situ Meas. Soil Properties, 350–372. Reston, VA: ASCE.
Silvestri, V., and G. Abou-Samra. 2012. “Analytical solution for undrained plane strain expansion of a cavity in modified Cam clay.” Geomech. Eng. 4 (1): 19–37. https://doi.org/10.12989/gae.2012.4.1.019.
Silvestri, V., and C. Tabib. 2013. “Analysis of self-boring pressuremeter tests in a sensitive clay of Quebec.” In Proc., 18th Int. Conf. on Soil Mechanics and Geotechnical Engineering, Parallel Session ISP6, PRESSIO 2013 [Comité français de la mécanique des sols et de la géotechnique], 1–4. Paris: Apagéo.
Silvestri, V., and C. Tabib. 2017. “Analysis of cylindrical cavity expansion in modified Cam clay with Ko consolidation.” In Soil Testing, Soil Stability, and Ground Improvement: Proc., GeoMEasT 2017—Sustainable Civil Infrastructure: Innovative Infrastructure Geotechnology, edited by A. Viana da Fonseca, W. Frikha, and S. Varaksin, 297–310. New York: Springer.
Silvestri, V., C. Tabib, and C. Bravo-Jonard. 2015. “Effective stress parameters determined from undrained SBP tests in a stiff clay of Quebec.” In Proc., 7th Int. Symp. 60 Years Press. ISP7 PRESSIO 2015, edited by W. Frikha, S. Varaksin, and M. Gambin, 261–269. Soukra Ariana, Tunisia: Boussaa.
Wood, D. M. 2007. Soil behaviour and critical state soil mechanics. Cambridge, UK: Cambridge University Press.
Yu, H. S. 2000. Cavity expansion methods in geomechanics. Dordrecht, Netherlands: Kluwer Academic Publishers.
Yu, H. S. 2006. Plasticity and geotechnics. New York: Springer.
Zytynski, M., M. F. Randolph, R. Nova, and C. P. Wroth. 1978. “On modelling the unloading-reloading behaviour of soils.” Int. J. Numer. Anal. Methods Geomech. 2 (1): 87–93. https://doi.org/10.1002/nag.1610020107.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Aug 14, 2017
Accepted: Jan 9, 2018
Published online: May 19, 2018
Published in print: Aug 1, 2018
Discussion open until: Oct 19, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.