Physical and Mechanical Characterization of Fresh Bamboo for Infrastructure Projects
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 2
Abstract
This study tests the physical and mechanical properties of fresh bamboo to explore its suitability for reinforcing the embankment of a highway. A series of experiments is performed using a bamboo species (Sinocalamus affinis) and soil specimens with bamboo grids that are similar to geogrids. The testing indexes include the natural density, water content, wall thickness, and the outer perimeter of bamboo culm. The mechanical property tests include a uniaxial compression test on bamboo culm, tensile and flexural tests on bamboo strips, a friction test on the bamboo–soil interface, a pullout test on a single bamboo strip in a soil specimen, and a triaxial compression test on a soil specimen with a bamboo grid. The results show that the density and water content of fresh bamboo become relatively stable after growing for 2 years and the bamboo strips can satisfy the specification requirement for a traditional geogrid because of their excellent mechanical properties. Based on the physical and mechanical test results, appropriate cutting age of fresh bamboo is 2 years and more. In addition, the compressive strength for bamboo grid–reinforced soil is significantly greater than that of prime soil, and could effectively prevent filling embankments from settling. In addition, its increased shear resistance could suppress a slip shear failure in the filling embankment.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the National Key Basic Research Development Program of China (Grant No. 2015CB057903) and the New Century Excellent Talents Project by the Ministry of Education of China (Grant No. NCET-13-0382) for financial support. They also thank Elsevier’s Webshop for editing and polishing this paper. Finally, they also thank the three peer reviewers for their good suggestions.
References
Abdi, M. R., and Arjomand, M. A. (2011). “Pullout tests conducted on clay reinforced with geogrid encapsulated in thin layers of sand.” Geotext. Geomembr., 29(6), 588–595.
Abdul Khalil, H. P. S., Bhat, I. U. H., Jawaid, M., Zaidon, A., Hermawan, D., and Hadi, Y. S. (2012). “Bamboo fibre reinforced biocomposites: A review.” Mater. Des., 42, 353–368.
Agarwal, A., Nanda, B., and Maity, D. (2014). “Experimental investigation on chemically treated bamboo reinforced concrete beams and columns.” Constr. Build. Mater., 71, 610–617.
Akbulut, S., Arasana, S., and Kalkan, E. (2007). “Modification of clayey soils using scrap tire rubber and synthetic fibers.” Appl. Clay Sci., 38(1–2), 23–32.
Alamshahi, S., and Hataf, N. (2009). “Bearing capacity of strip footings on sand slopes reinforced with geogrid and grid-anchor.” Geotext. Geomembr., 27(3), 217–226.
Alawaji, H. A. (2001). “Settlement and bearing capacity of geogrid-reinforced sand over collapsible soil.” Geotext. Geomembr., 19(2), 75–88.
ASTM. (2002). “Standard test method for determining the coefficient of soil and geosynthetic or geosynthetic and geosynthetic friction by the direct shear method.” ASTM D5321-02, Reston, VA.
BCS (Bureau of China Standards). (1975). “Method of testing in bending strength of wood.” ISO 3133:1975, Beijing.
BCS (Bureau of China Standards). (1995). “Testing methods for physical and mechanical properties of bamboos.” GB/T 15780:1995, Beijing.
BCS (Bureau of China Standards). (1999). “Geosynthetics plastic geogrids.” GB/T 17689:1999, Beijing.
Benmebarek, S., Berrabah, F., and Benmebarek, N. (2015). “Effect of geosynthetic reinforced embankment on locally weak zones by numerical approach.” Comput. Geotech., 65, 115–125.
BIS (Bureau of Indian Standards). (1977). “Methods of tests for split bamboos.” IS 8242:1976, New Delhi, India.
Chen, X. B., Zhang, J. S., and Li, Z. Y. (2014). “Shear behavior of a geogrid-reinforced coarse-grained soil based on large-scale triaxial tests.” Geotext. Geomembr., 42(4), 312–328.
Ghavami, K. (1988). “Application of bamboo as a low-cost construction material.” Proc., Int. Bamboo Workshop, Kerala Forest Research Institute, Peechi, Kerala, India, 270–279.
Hebel, D. E., Javadian, A., Heisel, F., Schlesier, K., Griebel, D., and Wielopolski, M. (2014). “Process-controlled optimization of the tensile strength of bamboo fiber composites for structural applications.” Compos. Part B: Eng., 67(67), 125–131.
Hegde, A., and Sitharam, T. G. (2014). “Use of bamboo in soft-ground engineering and its performance comparison with geosynthetics: Experimental studies.” J. Mater. Civ. Eng., 04014256.
Hegde, A., and Sitharam, T. G. (2015). “Experimental and analytical studies on soft clay beds reinforced with bamboo cells and geocells.” Int. J. Geosynth. Ground Eng., 1(2), 1–13.
ISO. (2004). “Bamboo: Determination of physical and mechanical properties.” ISO 22157:2004, Geneva.
Jensen, W. B. (2008). “The origin of the polymer concept.” J. Chem. Educ., 85(5), 624–625.
Kuity, A., and Roy, T. K. (2013). “Utilization of geogrid mesh for improving the soft subgrade layer with waste material mix compositions.” Procedia Soc. Behav. Sci., 104(3), 255–263.
Kwan, C. C. J. (2006). “Geogrid reinforcement of railway ballast.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Nottingham, Nottingham, U.K.
Li, H. T., Zhang, Q. S., Huang, D. S., and Deeks, A. J. (2013). “Compressive performance of laminated bamboo.” Compos. Part B: Eng., 54, 319–328.
Li, M., Chai, S. X., Du, H. P., Wei, L., and Shi, Q. (2010). “Reasonable reinforcement position and shear strength model of reinforced saline soil with wheat straw and line.” Chin. J. Rock Mech. Eng., 29(3), 3293–3299 (in Chinese).
Li, Z. J., Liu, C. P., and Yu, T. X. (2002). “Laminate of reformed bamboo and extruded fiber-reinforced cementitious plate.” J. Mater. Civ. Eng., 359–365.
Liu, C. N., Ho, Y. H., and Huang, J. W. (2009). “Large scale direct shear tests of soil/PET-yarn geogrid interfaces.” Geotext. Geomembr., 27(1), 19–30.
Liu, D. G., Song, J. W., Debbie, P. A., Chang, P. R., and Hua, Y. (2012). “Bamboo fiber and its reinforced composites: Structure and properties.” Cellulose, 19(5), 1449–1480.
Low, I. M., Che, Z. Y., Latella, B. A., and Sim, K. S. (2006). “Mechanical and fracture properties of bamboo.” Key Eng. Mater., 312, 15–20.
Mahdavi, M., Clouston, P. L., and Arwade, S. R. (2011). “Development of laminated bamboo lumber: Review of processing, performance, and economical considerations.” J. Mater. Civ. Eng., 1036–1042.
Mattox, R. M. (1987). “Geogrid reinforcement for Cochrane bridge embankment.” Geotext. Geomembr., 6(1), 225–232.
Mitch, D., Harries, K. A., and Sharma, B. (2010). “Characterization of splitting behavior of bamboo culms.” J. Mater. Civ. Eng., 1195–1199.
Mukhopadhyay, P., and Dutta, S. C. (2015). “Investigating compressive and cleavage strengths of an Indian bamboo species.” J. Mater. Civ. Eng., 06014029.
O’Kelly, B. C., and Naughton, P. J. (2008). “On the interface shear resistance of a novel geogrid with in-plane drainage capability.” Geotext. Geomembr., 26(4), 357–362.
Palmeira, E. M. (2009). “Soil-geosynthetic interaction: Modelling and analysis.” Geotext. Geomembr., 27(5), 368–390.
Ramirez, F., Correal, J. F., Yamin, L. E., Atoche, J. C., and Piscal, C. M. (2012). “Dowel-bearing strength behavior of glued laminated Guadua bamboo.” J. Mater. Civ. Eng., 1378–1387.
Rowe, R. K., and Mylleville, B. L. J. (1996). “A geogrid reinforced embankment on peat over organic silt: A case history.” Can. Geotech. J., 33(1), 106–122.
Shah, M. Y., Saran, S., and Mittal, S. (2013). “Effect of geogrid reinforcement on hyperbolic stress strain behavior of sand: An experimental investigation.” Int. J. Sci. Res., 2(1), 654–659.
Sharma, B., Gatóo, A., and Ramage, M. H. (2015). “Effect of processing methods on the mechanical properties of engineered bamboo.” Constr. Build. Mater., 83, 95–101.
Singh, H. P. (2013). “Strength and stiffness response of medium dense reinforced sand.” Int. J. Current Eng. Technol., 3(4), 1419–1423.
Sivakumar Babu, G. L., and Vasudevan, A. K. (2008). “Strength and stiffness response of coir fiber-reinforced tropical soil.” J. Mater. Civ. Eng., 571–577.
Sulastiningsih, I. M., and Nurwati (2009). “Physical and mechanical properties of laminated bamboo board.” J. Trop. For. Sci., 21(3), 246–251.
Tatsuoka, F., Koseki, J., and Tateyama, M. (1995). “Performance of geogrid-reinforced soil retaining walls during the great Hanshin-Awaji earthquake.” Proc., 1st Int. Conf. on Earthquake Geotechnical Engineering, International Society of Soil Mechanics and Foundation Engineering, Tokyo, 55–62.
Terai, M., and Minami, K. (2011). “Fracture behavior and mechanical properties of bamboo reinforced concrete members.” Procedia Eng., 10, 2967–2972.
Van der Lugt, P., Van den Dobbelsteen, A. A. J. F., and Abrahams, R. (2003). “Bamboo as a building material alternative for Western Europe?” J. Bamboo Rattan, 2(3), 205–223.
Van der Lugt, P., Van den Dobbelsteen, A. A. J. F., and Janssen, J. J. A. (2006). “An environmental, economic, and practical assessment of bamboo as a building material for supporting structures.” Constr. Build. Mater., 20(9), 648–656.
Wang, H. K., Li, W. J., Ren, D., Yu, Z. X., and Yu, Y. (2014a). “A two-variable model for predicting the effects of moisture content and density on compressive strength parallel to the grain for moso bamboo.” J. Wood Sci., 60(5), 362–366.
Wang, H. Y., Zhao, W. F., and Bu, G. B. (2012). “Application technology of bamboo reinforced concrete in building structures.” Archit. Technol., 43(7), 605–607.
Wang, L. Y., Chen, G. X., and Chen, S. (2015). “Experimental study on seismic response of geogrid reinforced rigid retaining walls with saturated backfill sand.” Geotext. Geomembr., 43(1), 35–45.
Wang, Q. B., Wen, X. K., Jiang, J. Q., Zhang, C., and Shi, Z. Y. (2014b). “Experimental study on performance of multidirectional geogrid and its application in engineering of high slope.” J. Wuhan Univ. Technol. Mater. Sci. Ed., 29(4), 704–711.
Wong, K. J., Zahi, S., Low, K. O., and Lim, C. C. (2010). “Fracture characterization of short bamboo fibre reinforced polyester composites.” Mater. Des., 31(9), 4147–4154.
Xing, H. F., Zhang, Z., Liu, H. B., and Wei, H. (2014). “Large-scale tests of pile-supported earth platform with and without geogrid.” Geotext. Geomembr., 42(6), 586–598.
Yang, G. Q., Liu, H. B., Lv, P., and Zhang, B. J. (2012). “Geogrid-reinforced lime-treated cohesive soil retaining wall: Case study and implications.” Geotext. Geomembr., 35(39), 112–118.
Yoo, C. (2001). “Laboratory investigation of bearing capacity behavior of strip footing on geogrid-reinforced sand slope.” Geotext. Geomembr., 19(5), 279–298.
Yue, B. H., and Zhong, S. Z. (2001). The investigation report of the great wall in Han dynasty on Shule River, Cultural Relics Press, Beijing (in Chinese).
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jan 5, 2017
Accepted: Jul 10, 2017
Published online: Nov 24, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 24, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.