Resilient Response Characterization of Pavement Foundation Materials Using a Polyacrylamide-Based Stabilizer
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 1
Abstract
The demand for stable and high-quality granular materials for the construction of flexible granular pavements is constantly increasing due to population growth and the ever-expanding urbanization of the planet. Thus, the function of material stabilization to improve the quality and enable the use of available low-quality granular materials is becoming increasingly important. Traditionally, cement-based additives have been used for such stabilization. However, alternate additives such as polymers have recently been shown to also enhance strength and stiffness characteristics. Furthermore, as an added benefit, the use of polymer-based additives results in a far lower carbon footprint than cement-based additives. In the study reported herein, an extensive laboratory investigation was carried out to evaluate the use of polymeric stabilization to improve engineering properties of pavement materials. The engineering properties of three types of soils were evaluated after being treated with a polyacrylamide (PAM). Strength and stiffness properties were determined by conducting unconfined compressive strength (UCS) and repeated load triaxial (RLT) tests. The experimental program showed that the addition of PAM consistently enhanced the strength properties of all tested soils. The PAM-treated samples also showed improvements in the resilient moduli when compared to samples treated with traditional additives of lime and cement. Furthermore, multiple regression models were developed and the resulting three-parameter model revealed an excellent fit to actual resilient moduli. Finally, resilient modulus values were used to analyze the structural coefficient of a granular subbase layer and the results confirmed the improvements in structural capacity of all treated samples.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the contribution of Earthco Projects Pty Ltd., particularly Mr. Mark Holding, for providing the stabilizer additive for this research.
References
AASHTO. (1993). AASHTO guide for design of pavement structures, Washington, DC.
AASHTO. (2003). “Standard method of test for determining the resilient modulus of soils and aggregate materials.” AASHTO T307-99, Washington, DC.
Ajayi-Majebi, A., Grissom, W. A., Smith, L. S., and Jones, E. E. (1991). “Epoxy-resin-based chemical stabilization of a fine, poorly graded soil system.” Transp. Res. Rec., 1259, 95–108.
Andrews, R. C., and Duffy, P. (2008). “Polymer stabilisation and best value management of unsealed road networks.” J. Aust. NZ Res. Practice, 17(3), 59–69.
ASTM. (2008). “Standard test method for unconfined compressive strength of cohesive soil.” ASTM D2166, West Conshohocken, PA.
ASTM. (2011). “Standard practice for classification of soils for engineering purposes (Unified Soil Classification System).” ASTM D2487, West Conshohocken, PA.
Austroads. (2007). “Commentary to AG: PT/T053—Determination of permanent deformation and resilient modulus characteristics of unbound granular materials under drained conditions.” Sydney, Australia.
Camarena, S. (2013). “Sustainable road maintenance and construction utilising new technologies.” Int. Public Works Conf., 2013, Institute of Public Works Engineering Australia, North Sydney, NSW, Australia.
Chen, B. (2004). “Polymer–clay nanocomposites: An overview with emphasis on interaction mechanisms.” Br. Ceram. Trans., 103(6), 241–249.
Elliott, R. P., and Thornton, S. (1988). “Simplification of subgrade resilient modulus testing.” Transp. Res. Rec., 1192, 1–7.
Fleming, P., and Rogers, C. (1995). “Assessment of pavement foundations during construction.” Proc. ICE-Transp., 111(2), 105–115.
Güneyli, H., and Rüşen, T. (2016). “Effect of length-to-diameter ratio on the unconfined compressive strength of cohesive soil specimens.” Bull. Eng. Geol. Environ., 75(2), 793–806.
Holtz, R. D., Kovacs, W. D., and Sheahan, T. C. (2011). An introduction to geotechnical engineering, 2nd Ed., Pearson, Upper Saddle River, NJ.
Iyengar, S. R., Masad, E., Rodriguez, A. K., Bazzi, H. S., Little, D., and Hanley, H. J. (2012). “Pavement subgrade stabilization using polymers: Characterization and performance.” J. Mater. Civ. Eng., 472–483.
Jameson, G. (2006). Guide to pavement technology. 2: Pavement structural design, Austroads, Sydney, Australia.
Lekarp, F., Isacsson, U., and Dawson, A. (2000). “State of the art. II: Permanent strain response of unbound aggregates.” J. Transp. Eng., 76–83.
Malik, M., and Letey, J. (1991). “Adsorption of polyacrylamide and polysaccharide polymers on soil materials.” Soil Sci. Soc. Am. J., 55(2), 380–383.
Midgley, L. (2009). “Best practice for the preparation of new granular pavements for thin bituminous surfacing.” Proc., 13th Int. Flexible Pavements Conf., Australian Asphalt Paving Association, Port Melbourne, VIC, Australia.
Mohammadinia, A., Arulrajah, A., Sanjayan, J., Disfani, M. M., Bo, M. W., and Darmawan, S. (2014). “Laboratory evaluation of the use of cement-treated construction and demolition materials in pavement base and subbase applications.” J. Mater. Civ. Eng., 04014186.
Newman, J. K., Tingle, J. S., Gill, C., and Mccaffrey, T. (2005). “Stabilization of silty sand using polymer emulsions.” Int. J. Pavements, 4(1–2), 1–12.
Park, J., Vipulanandan, C., Kim, J. W., and Oh, M. H. (2006). “Effects of surfactants and electrolyte solutions on the properties of soil.” Environ. Geol., 49(7), 977–989.
Puppala, A. J., Hoyos, L. R., and Potturi, A. K. (2011). “Resilient moduli response of moderately cement-treated reclaimed asphalt pavement aggregates.” J. Mater. Civ. Eng., 990–998.
Puppala, A. J., Mohammad, L., and Allen, A. (1996). “Engineering behavior of lime-treated Louisiana subgrade soil.” Transp. Res. Rec., 1546, 24–31.
Sangiorgi, C., Lantieri, C., and Dondi, G. (2015). “Construction and demolition waste recycling: An application for road construction.” Int. J. Pavement Eng., 16(6), 530–537.
Santoni, R. L., Tingle, J. S., and Webster, S. L. (2002). “Stabilization of silty sand with nontraditional additives.” Transp. Res. Rec., 1787, 61–70.
Shogaki, T. (2007). “Effect of specimen size on unconfined compressive strength properties of natural deposits.” Soils Found., 47(1), 119–129.
Standards Australia. (1997). “Soil chemical tests—Determination of the pH value of a soil-electrometric method.” AS 1289.4.3.1, Sydney, Australia.
Standards Australia. (2001). “Sampling and preparation of soils-preparation of disturbed soil samples for testing.” AS 1289.1.1, Sydney, Australia.
Standards Australia. (2003a). “Soil classification tests—Determination of the particle size distribution of a soil-standard method of fine analysis using hydrometer.” AS 1289.3.6.3, Sydney, Australia.
Standards Australia. (2003b). “Soil compaction and density tests—Determination of the dry density/moisture content relation of a soil using modified compactive effort.” AS 1289.5.2.1, Sydney, Australia.
Standards Australia. (2008). “Unconfined compressive strength of compacted materials.” AS 5101.4, Sydney, Australia.
Standards Australia. (2009a). “Soil classification tests—Calculation of the plasticity index of a soil.” AS 1289.3.3.1, Sydney, Australia.
Standards Australia. (2009b). “Soil classification tests—Determination of the particle size distribution of a soil-standard method of analysis by sieving.” AS 1289.3.6.1, Sydney, Australia.
Theng, B. K. G. (2012). “Negatively charged polymers (polyanions).” Chapter 4, Developments in clay science, B. K. G. Theng, ed., Vol. 4, Elsevier, Amsterdam, Netherlands, 111–127.
Tingle, J. S., and Santoni, R. L. (2003). “Stabilization of clay soils with nontraditional additives.” Transp. Res. Rec., 1819, 72–84.
Uzan, J. (1985). “Characterization of granular material.” Transp. Res. Rec., 1022, 52–59.
VicRoads. (2001). Section 812: Crushed rock for pavement base and subbase, Kew, Australia.
VicRoads. (2013). Cementitious treated crushed rock for pavement subbase, Kew, Australia.
Virgil Ping, W., Yang, Z., Liu, C., and Bruce, D. (2001). “Measuring resilient modulus of granular materials in flexible pavements.” Transp. Res. Rec., 1778, 81–90.
Yongfeng, D., Songyu, L., Jian’an, H., Kan, L., Yanjun, D., and Fei, J. (2012). “Strength and permeability of cemented soil with PAM.” Proc., Fourth Int. Conf. on Grouting and Deep Mixing, ASCE, Reston, VA, 1800–1807.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 30, 2016
Accepted: Jun 13, 2017
Published online: Oct 25, 2017
Published in print: Jan 1, 2018
Discussion open until: Mar 25, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.