Rheological and Structural Evolution of Rubberized Asphalts under Weathering
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 10
Abstract
Rubberized asphalt has been widely used for extending the service life of pavement. Understanding the weathering mechanism of rubberized asphalt is useful for selecting appropriate rubberized asphalt. This paper examines the weathering process of two typical rubberized asphalts composed of crumb rubber modified asphalt (CRMA) and terminal blend rubber asphalt (TB) by characterizing the rheological and structural evolution of the aged asphalt. Dynamic shear rheometer analysis, infrared spectroscopy, and gel permeation chromatography are used to analyze this evolution. The results show that significant changes occur in the chemical structures and rheological properties of the two rubberized asphalts throughout the weathering process. Although the stiffness of CRMA and TB obviously increases during weathering, their increasing trends are distinct from each other. The chemical evolutions of CRMA and TB during the weathering process differ significantly in terms of variations in molecular weight and carbonyl index.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was financially supported by the Natural Science Foundation of China (No. 51273110) and Guangzhou Science and Technology Project (201604020126).
References
ASTM. (2005). “Standard test method for penetration of bituminous materials.” ASTM D5, West Conshohocken, PA.
ASTM. (2006a). “Standard test method for softening point of bitumen (ring-and-ball apparatus).” ASTM D36, West Conshohocken, PA.
ASTM. (2006b). “Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer.” ASTM D4402, West Conshohocken, PA.
ASTM. (2007). “Standard test method for ductility of bituminous materials.” ASTM D113, West Conshohocken, PA.
Billiter, T. C., Chun, J. S., Davison, R. R., Glover, C. J., and Bullin, J. A. (1997). “Investigation of the curing variables of asphalt-rubber binder.” Pet. Sci. Technol., 15(5–6), 445–469.
Dehouchea, N., Kaci, M., and Mokhtar, K. A. (2012). “Influence of thermo-oxidative aging on chemical composition and physical properties of polymer modified bitumen.” Constr. Build. Mater., 26(1), 350–356.
Durrieu, F., Farcas, F., and Muillet, V. (2007). “The influence of UV aging of a styrene/butadiene/styrene modified bitumen: Comparison between laboratory and on site aging.” Fuel, 86(10–11), 1446–1451.
Fernández-Gómez, W. D., Quintana, H. A. R., Daza, C. E., and Lizcano, F. A. R. (2014). “The effects of environmental aging on Colombian asphalt.” Fuel, 115, 321–328.
Ghavibazoo, A., and Abdelrahman, M. (2014). “Effect of CR modification on short term aging susceptibility of asphalt binder.” Int. J. Pavement Eng., 7(4), 297–304.
Ghavibazoo, A., Abdelrahman, M., and Ragab, M. (2016). “Changes in composition and molecular structure of asphalt in mixing with CR modifier.” Road Mater. Pavement Des., 17(4), 906–919.
ISO. (2004). “Paints and varnishes—Natural weathering of coatings—Exposure and assessment.” ISO 2810, Geneva.
Kandhal, P., and Chakraborty, S. (1996). “Effect of asphalt film thickness on short- and long-term aging of asphalt paving mixtures.” Transp. Res. Rec., 1535, 83–90.
Kenbeilova, S. Z., Shaihutdinov, E. M., Boiko, G. I., Lyubchenko, N. P., and Dergunov, S. A. (2013). “Investigation of polymeric bitumen binder subject to climatic service conditions.” Int. J. Chem. Sci., 11(1), 673–682.
Lamontagne, J., Dumas, P., Mouillet, V., and Kister, J. (2001). “Comparison by Fourier transform infrared (FTIR) spectroscopy of different ageing techniques: Application to road bitumens.” Fuel, 80(4), 483–488.
Lee, S. J., Hu, J., Kim, H., Amirkhanian, S. N., and Jeong, K. D. (2011). “Aging analysis of rubberized asphalt binders and mixes using gel permeation chromatography.” Constr. Build. Mater., 25(3), 1485–1490.
Lins, V., Araújo, M., Yoshida, M., Ferraz, V., Andrada, D., and Lameiras, F. (2008). “Photodegradation of hot-mix asphalt.” Fuel, 87(15–16), 3254–3261.
Liu, M., and Horrocks, A. R. (2002). “Effect of carbon black on UV stability of LLDPE films under artificial weathering conditions.” Polym. Degrad. Stab., 75(3), 485–499.
Lu, X., and Isacsson, U. (2002). “Effect of ageing on bitumen chemistry and rheology.” Constr. Build. Mater., 16(1), 15–22.
Ma, T., Chen, C., and Li, C. (2011). “Laboratory investigation of recycling for aged SBS modified asphalt cement.” GeoHunan Int. Conf. 2011, ASCE, Reston, VA, 139–149.
Motepara, A., Santagata, E., and Tosi, G. (1996). “Photochemical degradation of pure bitumen by UV radiation.” Proc., 1st Eurasphalt & Eurbitumen Congress, E&E, Strasbourg, 133.
Nivitha, M. R., Prasad, E., and Krishnan, J. M. (2016). “Ageing in modified bitumen using FTIR spectroscopy.” Int. J. Pavement Eng., 17(7), 565–577.
Qin, Q., Schabron, J. F., Boysen, R. B., and Farrar, M. J. (2014). “Field aging effect on chemistry and rheology of asphalt binders and rheological predictions for field aging.” Fuel, 121, 86–94.
Ruan, Y., Davison, R. R., and Glover, C. J. (2003). “The effect of long-term oxidation on the rheological properties of polymer modified asphalts.” Fuel, 82(14), 1763–1773.
Sugano, M., Iwabuchi, Y., Watanabe, T., Kajita, J., Iwata, K., and Hirano, K. (2010). “Relations between thermal degradations of SBS copolymer and asphalt substrate in polymer modified asphalt.” Clean Tech. Environ. Policy, 12(6), 653–659.
Sun, L., Wang, Y., and Zhang, Y. (2014). “Aging mechanism and effective recycling ratio of SBS modified asphalt.” Constr. Build. Mater., 70, 26–35.
Tarefder, R. A., and Yousefi, S. S. (2015). “Rheological examination of aging in polymer-modified asphalt.” J. Mater. Civ. Eng., 04015112.
Wang, Q., Li, S., Wu, X., Wang, S., and Ouyang, C. (2016a). “Weather aging resistance of different rubber modified asphalts.” Constr. Build. Mater., 106, 443–448.
Wang, S., Wang, Q., and Li, S. (2016b). “Thermooxidative aging mechanism of crumb-rubber-modified asphalt.” J. Appl. Polymer Sci., 133(16), in press.
Wang, Y., Sun, L., and Qin, Y. (2015). “Aging mechanism of SBS modified asphalt based on chemical reaction kinetics.” Constr. Build. Mater., 91, 47–56.
Wu, S. P., Pang, L., Mo, L. T., Chen, Y. C., and Zhu, G. J. (2009). “Influence of aging on the evolution of structure, morphology and rheology of CRMAs and SBS modified asphalt.” Constr. Build. Mater., 23(2), 1005–1010.
Xiang, L., Cheng, J., and Kang, S. (2015). “Thermal oxidative aging mechanism of CR/SBS composite modified asphalt.” Constr. Build. Mater., 75, 169–175.
Xie, Z., and Shen, J. (2016). “Effect of weathering on rubberized porous European Mixture.” J. Mater. Civ. Eng., 04016043.
Yao, H., Zhou, S., and Wang, S. (2016). “Structural evolution of tire rubber in the asphalt.” J. Appl. Polymer Sci., in press.
Zeng, W., Wu, S., Wen, J., and Chen, Z. (2015). “The temperature effects in aging index of asphalt during UV aging process.” Constr. Build. Mater., 93, 1125–1131.
Zhao, X., Wang, S., Wang, Q., and Yao, H (2016). “Rheological and structural evolution of SBS modified asphalts under natural weathering.” Fuel, 184, 242–247.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 3, 2016
Accepted: Mar 25, 2017
Published online: Jul 12, 2017
Published in print: Oct 1, 2017
Discussion open until: Dec 12, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.