Effect of Powdered Recycled Tire on Sulfate Resistance of Cemented Clay
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 10
Abstract
Magnesium sulfate () attack is a major problem in geotechnical engineering projects, as exposure to sulfate can affect soil integrity. Lightweight recycled materials such as used vehicle tires can be used to improve the geotechnical properties of soil, while also eliminating landfill. This study investigated the effects of addition of powdered recycled tire (PRT) on the sulfate resistance of cemented clay specimens cured for 7, 14, and 28 days. A total of 74 unconfined compressive strength (UCS) tests were conducted on benchmark (unexposed) and -exposed specimens. Addition of PRT improved the peak UCS values () in both conditions. Microstructural analysis by X-ray powder diffraction and scanning electron microscopy was performed on selected benchmark and -exposed specimens. Exposure to reduced the generation of hydration products such as calcium silicate hydrate (CSH), resulting in poor connections between PRT and soil particles.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the use of Curtin University’s Microscopy & Microanalysis Facility, whose instrumentation has been partially funded by the university, and state and commonwealth governments. The second author is supported by Australian Postgraduate Award (APA) and Curtin University Postgraduate Scholarship (CUPS).
References
Akbulut, S., Arasan, S., and Kalkan, E. (2007). “Modification of clayey soils using scrap tire rubber and synthetic fibers.” Appl. Clay Sci., 38(1), 23–32.
ASTM. (2000). “Standard test method for unconfined compressive strength of cohesive soil.” ASTM D2166, West Conshohoken, PA.
ASTM. (2011). “Standard practice for classification of soils for engineering purposes (unified soil classification system).” ASTM D2487, West Conshohocken, PA.
ASTM. (2012). “Standard test methods for laboratory compaction characteristics of soil using modified effort.” ASTM D1557, West Conshohocken, PA.
Bosscher, P., Edil, T., and Kuraoka, S. (1997). “Design of highway embankments using tire chips.” J. Geotech. Geoenviron. Eng., 295–304.
Cabalar, A. F. (2011). “Direct shear tests on waste tires-sand mixtures.” Geotech. Geol. Eng., 29(4), 411–418.
Consoli, N., Prietto, P., Carraro, J., and Heineck, K. (2001). “Behavior of compacted soil-fly ash-carbide lime mixtures.” J. Geotech. Geoenviron. Eng., 774–782.
Foose, G., Benson, C., and Bosscher, P. (1996). “Sand reinforced with shredded waste tires.” J. Geotech. Eng., 760–767.
Guleria, S. P., and Dutta, R. K. (2011). “Unconfined compressive strength of fly ash-lime–gypsum composite mixed with treated tire chips.” J. Mater. Civil Eng., 1255–1263.
Hekal, E. E., Kishar, E., and Mostafa, H. (2002). “Magnesium sulfate attack on hardened blended cement pastes under different circumstances.” Cem. Concr. Res., 32(9), 1421–1427.
Hernández-Olivares, F., Barluenga, G., Parga-Landa, B., Bollati, M., and Witoszek, B. (2007). “Fatigue behaviour of recycled tyre rubber–filled concrete and its implications in the design of rigid pavements.” Constr. Build. Mater., 21(10), 1918–1927.
Horpibulsuk, S., Suksiripattanapong, C., Samingthong, W., Rachan, R., and Arulrajah, A. (2015). “Durability against wetting-drying cycles of water treatment sludge–fly ash geopolymer and water treatment sludge–cement and silty clay–cement systems.” J. Mater. Civ. Eng., 04015078.
Huang, Y., Bird, R. N., and Heidrich, O. (2007). “A review of the use of recycled solid waste materials in asphalt pavements.” Resour. Conserv. Recycl., 52(1), 58–73.
Jafari, M., and Esna-ashari, M. (2012). “Effect of waste tire cord reinforcement on unconfined compressive strength of lime stabilized clayey soil under freeze-thaw condition.” Cold Reg. Sci. Technol., 82, 21–29.
James, R., Kamruzzaman, A. H. M., Haque, A., and Wilkinson, A. (2008). “Behaviour of lime-slag–treated clay.” Proc. Inst. Civil Eng. Ground Improv., 161(4), 207–216.
Keramatikerman, M., Chegenizadeh, A., and Nikraz, H. (2016). “Effect of GGBFS and lime binders on the engineering properties of clay.” Appl. Clay Sci., 132, 722–730.
Lee, J., Salgado, R., Bernal, A., and Lovell, C. (1999). “Shredded tires and rubber-sand as lightweight backfill.” J. Geotech. Geoenviron. Eng., 132–141.
Li, B., Huang, M., and Zeng, X. (2016). “Dynamic behavior and liquefaction analysis of recycled-rubber sand mixtures.” J. Mater. Civil Eng., 04016122.
Little, D., Nair, S., and Herbert, B. (2010). “Addressing sulfate-induced heave in lime treated soils.” J. Geotech. Geoenviron. Eng., 110–118.
Manutec. (2011). “Material safety data sheet for magnesium sulphate/epsom salt.” Manutec, Australia.
Neaz Sheikh, M., Mashiri, M. S., Vinod, J. S., and Tsang, H. H. (2013). “Shear and compressibility behavior of sand-tire crumb mixtures.” J. Mater. Civil Eng., 1366–1374.
Noorzad, R., and Amini, P. F. (2014). “Liquefaction resistance of Babolsar sand reinforced with randomly distributed fibers under cyclic loading.” Soil Dyn. Earthquake Eng., 66, 281–292.
Obika, B., and Freer-Hewish, R. J. (1990). “Soluble salt damage to thin bituminous surfacing of roads and runways.” Australian Road Res., 20(4), 24–41.
Özkul, Z., and Baykal, G. (2007). “Shear behavior of compacted rubber fiber-clay composite in drained and undrained loading.” J. Geotech. Geoenviron. Eng., 767–781.
Patil, U., Valdes, J., and Evans, T. (2011). “Swell mitigation with granulated tire rubber.” J. Mater. Civ. Eng., 721–727.
Priyadarshee, A., Gupta, D., Kumar, V., and Sharma, V. (2015). “Comparative study on performance of tire crumbles with fly ash and kaolin clay.” Int. J. Geosynthetics Ground Eng., 1(4), 38.
Purwana, Y. M. (2013). “Experimental study on unsaturated direct shear and California bearing ratio tests with suction monitoring on sand-kaolin clay mixtures.” Ph.D. dissertation, Curtin Univ., Perth, Australia.
Raghavan, D., Huynh, H., and Ferraris, C. F. (1998). “Workability, mechanical properties, and chemical stability of a recycled tyre rubber-filled cementitious composite.” J. Mater. Sci., 33(7), 1745–1752.
Rajasekaran, G., Murali, K., and Srinivasaraghavan, R. (1997). “Effect of chlorides and sulphates on lime treated marine clays.” Soils Found., 37(2), 105–115.
Santhanam, M., Cohen, M. D., and Olek, J. (2001). “Sulfate attack research—Whither now?” Cem. Concr. Res., 31(6), 845–851.
Sibelco. (2011). “Material safety data sheet for clay prestige NY.” Sibelco Australia, Lang Lang East, VIC, Australia.
SUEZ. (2016). “Tyres.” ⟨http://www.sita.com.au/community-education/site-tours-education/recycling-tips/tyres/⟩ (Jan. 10, 2016).
Vakili, M. V., Chegenizadeh, A., Nikraz, H., and Keramatikerman, M. (2016). “Investigation on shear strength of stabilised clay using cement, sodium silicate and slag.” Appl. Clay Sci., 124, 243–251.
Wild, S., and Tasong, W. A. (1999). “Influence of ground granulated blastfurnace slag on the sulphate resistance of lime-stabilized kaolinite.” Mag. Concr. Res., 51(4), 247–254.
Yang, Y., Wang, G., and Xie, S. (2012). “Effect of magnesium sulfate on the unconfined compressive strength of cement-treated soils.” J. Test. Eval., 40(7), 1–8.
Yi, Y., Li, C., Liu, S., and Jin, F. (2015). “Magnesium sulfate attack on clays stabilised by carbide slag-and magnesia-ground granulated blast furnace slag.” Géotech. Lett., 5(4), 306–312.
Yilmaz, A., and Degirmenci, N. (2009). “Possibility of using waste tire rubber and fly ash with portland cement as construction materials.” Waste Manage., 29(5), 1541–1546.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 20, 2016
Accepted: Mar 20, 2017
Published online: Jun 20, 2017
Published in print: Oct 1, 2017
Discussion open until: Nov 20, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.