Preparation and Dynamic Performance of Basalt Fiber–Reinforced Lightweight Concrete Confined by Brass Strip
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 9
Abstract
This paper aims to develop a new material with outstanding energy-absorbing performance regarding its application in protection engineering. The preparation and dynamic performance of basalt fiber–reinforced lightweight concrete confined by a brass strip (FLCB) were experimentally investigated. The FLCB specimens were first prepared based on dense packing theory. Impact compression experiments were then carried out by a ( = diameter) split Hopkinson pressure bar apparatus, which was improved by the pulse-shaping technique. The resulting stress-strain curve, dynamic deformation, and energy-absorbing characteristics were studied. The results show that FLCB, with density of , is a kind of lightweight concrete. The stress-strain curve of FLCB can be divided into three stages: linear elastic, stress platform, and brittle failure. The stress platform stage has a significant effect on the improvement of energy-absorbing performance, and the percentage of the stress platform to the whole curve increases continuously with average strain rate. Both the ultimate strain and the energy-absorbing index are sensitive to strain rate and increase continuously with average strain rate. Furthermore, compared with conventional concrete, the production of FLCB is associated with a higher ultimate strain and energy-absorbing index, and the tendency becomes more obvious with increasing average strain rate. Therefore, FLCB includes a lightweight concrete with excellent energy-absorbing performance and this performance shows clear strain-rate dependence. Due to its features of outstanding energy absorption and low density, FLCB has a promising future to be used as antiexplosive layers in protection engineering.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for support from the Industrial Public Relation Project for Science and Technology Development in Shaanxi Province of China (2014k10-15); the Fund of the State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact (PLA University of Science and Technology) (DPMEIKF201406); and Projects of Youth Technology New Star of Shaanxi Province in China (2013KJXX-81).
References
Abdullah, J. A., Sumei, Z., and Jiepeng, L. (2010). “Shear strength and behavior of tubed reinforced and steel reinforced concrete (TRC and TSRC) short columns.” Thin Walled Struct., 48(3), 191–199.
Babu, D. S., Babu, K. G., and Wee, T. H. (2005). “Properties of lightweight expanded polystyrene aggregate concretes containing fly ash.” Cem. Concr. Res., 35(6), 1218–1223.
Brouwers, H. J. H. (2006). “The role of nanotechnology for the development of sustainable concrete.” Proc., ACI Session Nanotechnology of Concrete: Recent Developments and Future Perspectives, K. Sobolev, and S. P. Shah, eds., Vol. 7, American Concrete Institute, Denver, 69–90.
Choi, E., Kim, J. W., Rhee, I., and Kang, J. W. (2014). “Behavior and modeling of confined concrete cylinders in axial compression using FRP rings.” Compos. Part B: Eng., 58(3), 175–184.
Dilger, W. H., Koch, R., and Kowalczyk, R. (1984). “Ductility of plain and confined concrete under different strain rates.” J. ACI, 81(1), 73–81.
Dinger, D. R., and Funk, J. E. (1989). “Particle-size analysis routines available on Cerabull.” Am. Ceram. Soc. Bull., 68(8), 1406–1408.
Gang, P., Liu, D.-F., and Dai, H.-C. (2006). “Investigation of dynamic constitutive model of steel fiber concrete under conventional tri-axial compression.” Eng. Mech., 26(2), 142–147.
Gibson, L. J., and Ashby, M. F. (1999). Cellular solids: Structure and properties, Cambridge University Press, Cambridge, New York.
Grote, D. L., Park, S. W., and Zhou, M. (2001). “Dynamic behavior of concrete at high strain rates and pressures. I: Experimental characterization.” Int. J. Impact Eng., 25(9), 869–886.
Lee, O. S., Kim, S. H., and Lee, J. W. (2006). “Thickness effect of pulse shaper on dynamic stress equilibrium in the NBR rubber specimen.” Key Eng. Mater., 306–308(1–2), 1007–1012.
Li, W., and Xu, J. (2009). “Impact characterization of basalt fiber reinforced geopolymeric concrete using a 100-mm-diameter split Hopkinson pressure bar.” Mater. Sci. Eng., 513(14), 145–153.
Li, X. B., Lok, T. S., Zhao, J., and Zhao, P. J. (2000). “Oscillation elimination in the Hopkinson bar apparatus and resultant complete dynamic stress-strain curves for rocks.” Int. J. Rock Mech. Min. Sci., 37(7), 1055–1060.
Luo, X., Xu, J., Bai, E., and Li, Z. (2014). “Mechanical properties of ceramics-cement based porous material under impact loading.” Mater. Des., 55(6), 778–784.
Ravichandran, G., and Subhash, G. (1994). “Critical appraisal of limiting strain rates for compression testing of ceramics in a split Hopkinson pressure bar.” J. Am. Ceram. Soc., 77(1), 263–267.
Silva, M. J., and Gibson, L. J. (1997). “The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solids.” Int. J. Mech. Sci., 39(5), 549–563.
Sim, J., and Park, C. (2005). “Characteristics of basalt fiber as a strengthening material for concrete structures.” Compos. Part B: Eng., 36(6), 504–512.
Song, B., Chen, W., Antoun, B. R., and Frew, D. J. (2007a). “Determination of early flow stress for ductile specimens at high strain rates by using a SHPB.” Exp. Mech., 47(5), 671–679.
Song, B., Chen, W., Ge, Y., and Weerasooriya, T. (2007b). “Dynamic and quasi-static compressive response of porcine muscle.” J. Biomech., 40(13), 2999–3005.
Song, B., Chen, W. W., and Lu, W. Y. (2007c). “Mechanical characterization at intermediate strain rates for rate effects on an epoxy syntactic foam.” Int. J. Mech. Sci., 49(12), 1336–1343.
Su, H., and Xu, J. (2013). “Dynamic compressive behavior of ceramic fiber reinforced concrete under impact load.” Constr. Build. Mater., 45, 306–313.
Tedesco, J. W., and Ross, C. A. (1998). “Strain-rate-dependent constitutive equations for concrete.” J. Pressure Vessel Technol., 120(4), 398–405.
Wang, J. G., Sun, W., and Anand, S. (2009). “Numerical investigation on active isolation of ground shock by soft porous layers.” J. Sound Vibr., 321(3), 492–509.
Wang, L. (2001). “Progress in studies on dynamic response of structures and materials under explosive/impact loading.” Explosion Shock Waves, 21(2), 81–88 (in Chinese).
Wang, L. (2011). Foundations of stress waves, Elsevier, Oxford, U.K.
Wang, S., Zhang, M. H., and Quek, S. T. (2011). “Effect of specimen size on static strength and dynamic increase factor of high-strength concrete strength from SHPB test.” Test. Eval., 39(5), 898–907.
Wang, Z. L., Li, Y. C., and Wang, J. G. (2006). “Numerical analysis of attenuation effect of EPS geofoam on stress-waves in civil defense engineering.” Geotext. Geomembr., 24(5), 265–273.
Yang, J., and Jiang, G. (2003). “Experimental study on properties of pervious concrete pavement materials.” Cem. Concr. Res., 33(3), 381–386.
Yu, T. (2001). Impact dynamic, Tsinghua University Press, Beijing.
Zhang, F., and De, C. L. (1987). “Effect of applied tension on quality of brass strip manufactured by extrusion cutting.” CIRP Ann. Manuf. Technol., 36(1), 53–56.
Zhang, Z. X., Kou, S. Q., Jiang, L. G., and Lindqvist, P. A. (2000). “Effects of loading rate on rock fracture: Fracture characteristics and energy partitioning.” Int. J. Rock Mech. Min. Sci., 37(5), 745–762.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 18, 2016
Accepted: Feb 9, 2017
Published online: May 15, 2017
Published in print: Sep 1, 2017
Discussion open until: Oct 15, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.