Laboratory Testing of Self-Healing Microcapsules in Asphalt Mixtures Prepared with Recycled Asphalt Shingles
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 9
Abstract
Self-healing products such as microcapsules filled with an asphalt rejuvenator present an emerging technology that would allow asphalt mixtures to resist cracking damage caused by vehicular and environmental loading. The objective of this study was to characterize laboratory-prepared microcapsules in order to evaluate thermal stability as well as the self-healing effectiveness of the microcapsules in asphalt mixtures. A three-point bending test was used to evaluate the healing efficiency and stiffness recovery in asphalt mixtures under two healing conditions: room temperature and high temperature. An optical microscope was used to quantify the healing progress of cracked specimens as a function of time. Based on microscopic characterization, it was observed that the produced microcapsules had adequate thermal stability because the microcapsules showed no sign of breakage when exposed to high temperature. An analysis of microscopic images revealed a reduction in the size of the cracks for both healing conditions for a period from 0 to 6 days. A lower healing efficiency was observed for the mixture with microcapsules compared with the control because not all microcapsules have broken during the test and are designed to break over time and not all at once. Results also showed that there was a recovery in the stiffness of the mixtures because the healed stiffness was greater than the damaged stiffness but less than the undamaged stiffness. A greater stiffness recovery was observed at high temperature, which could be explained by binder aging during the 5-day conditioning period.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would also like to acknowledge the laboratory support from the Louisiana Transportation Research Center (LTRC).
References
Aguirre, M. A., Hassan, M. M., Shirzad, S., Daly, W. H., and Mohammad, L. N. (2016). “Micro-encapsulation of asphalt rejuvenators using melamine-formaldehyde.” Constr. Build. Mater., 114, 29–39.
ASTM. (2010). “Standard practice for classifying hot-mix recycling agents.” ASTM D4552/D4552M-10, West Conshohocken, PA.
Brown, E. N., Kesseler, M. R., Sottos, N. R., and White, S. R. (2003). “In situ poly (urea-formaldehyde) microencapsulation of dicyclopentadiene.” J. Microencapsulation, 20(6), 719–730.
Brownridge, J. (2010). “The role of an asphalt rejuvenator in pavement preservation: Use and need for asphalt rejuvenation.” Tricor Refining, Bakersfield, CA.
Chiu, C., and Lee, M. (2006). “Effectiveness of seal rejuvenators for bituminous pavement surfaces.” J. Test. Eval., 34(5), 390–394.
Construction Materials Recycling Association. (2013). “Economics of shingle recycling.” ⟨http://www.shinglerecycling.org/content/economics-shingle-recycling⟩ (May 22, 2016).
Garcia, A., Schlangen, E., van de Ven, M., and Sierra-Beltran, G. (2010). “Preparation of capsules containing rejuvenator for their use in asphalt concrete.” J. Hazard. Mater., 184(1–3), 603–611.
Karlsson, R., and Isacsson, U. (2006). “Material-related aspects of asphalt recycling—State of the art.” J. Mater. Civ. Eng., 81–92.
LDOTD (Louisiana Department of Transportation and Development). (2006). Louisiana standard specifications for roads and bridges, Baton Rouge, LA.
Maupin, G. W. (2010). “Investigation of the use of tear-off shingles in asphalt concrete.”, Virginia Transportation Research Council, Charottesville, VA.
Peterson, G., Davison, R., Glover, C., and Bullin, J. (1994). “Effect of composition on asphalt recycling agent performance.” Transp. Res. Rec., 1436, 38–46.
Samadzadeh, M., Hatami, S., Peikari, M., and Ashrafi, A. (2010). “A review on self-healing coatings based on micro/nanocapsules.” Prog. Org. Coat., 68(3), 159–164.
Shen, J., Amirkhanian, S., and Miller, J. A. (2007). “Effects of rejuvenating agents on Superpave mixtures containing reclaimed asphalt pavement.” J. Mater. Civ. Eng., 376–384.
Shirzad, S., Hassan, M. M., Aguirre, M. A., Mohammad, L. N., and Daly, W. H. (2016). “Evaluation of sunflower oil as a rejuvenator and its microencapsulation as a healing agent.” J. Mater. Civ. Eng., 04016116.
Sun, G., and Zhang, Z. (2002). “Mechanical strength of microcapsules made of different wall materials.” Int. J. Pharm., 242(1), 307–311.
Tran, N. H., Taylor, A., and Willis, R. (2012). “Effect of rejuvenator on performance properties of HMA mixtures with high RAP and RAS contents.”, National Center for Asphalt Technology, Auburn Univ., Auburn, AL.
Watson, D. E., Johnson, A., and Sharma, H. R. (1998). “Georgia’s experience with recycled roofing shingles in asphaltic concrete.” Transp. Res. Rec., 1638, 129–133.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 28, 2016
Accepted: Jan 19, 2017
Published online: Apr 18, 2017
Published in print: Sep 1, 2017
Discussion open until: Sep 18, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.