Sulfuric Acid Resistance of Quartz Sandstone Aggregate Concrete
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 6
Abstract
Sandstone is a popular type of natural stone and is made up of collective grains of quartz. India is one of the countries blessed with various types of sandstones with appealing colors. Demand for Indian sandstones has increased in the international market and they are being exported to many countries like United States, United Kingdom, and New Zealand. Since Indian sandstones possess impressive qualities to durability, strength, and resistance to abrasion, they are being used in roofing, paving, flooring, aesthetic pillars, and stone carving. Quartz sandstone is a type where the elemental framework of sandstone is dominated by quartz and may contain a small amount of clay in the form of muscovite. Since the clay content in a quartz sandstone is much lower, they can be used as an effective replacement for conventional coarse aggregates in the production of cement concrete. In this paper, quartz sandstones coarse aggregates have been utilized as a substitute of conventional coarse aggregates and its response to sulfuric acid has been studied. It can be concluded that concrete with quartz sandstone aggregates up to 40% replacement showed better resistance to sulfuric acid exposure.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdulla, N. A. (2015). “Effect of recycled coarse aggregate type on concrete.” J. Mater. Civ. Eng., 04014273.
Alani, A. M., and Faramarzi, A. (2014). “An evolutionary approach to modelling concrete degradation due to sulphuric acid attack.” Appl. Soft comput. J., 24, 985–993.
ASTM. (2009). “Standard test method for bulk density (“unit weight”) and voids in aggregate.” ASTM C29/C29M, West Conshohocken, PA.
ASTM. (2015). “Standard test method for modulus of rupture of dimension stone.” ASTM C99/C99M–15, West Conshohocken, PA.
ASTM. (2016). “Standard test method for compressive strength of dimension stone.” ASTM C170/C170M–16, West Conshohocken, PA.
Azevedo, F., Pacheco-Torgal, F., Jesus, C., Barroso de Aguiar, J. L., and Camoes, A. F. (2012). “Properties and durability of HPC with tire rubber wastes.” Constr. Build. Mater., 34, 186–191.
Backus, J., and McPolin, D. (2016). “Effect of cyclic carbonation on chloride ingression in GGBS concrete.” J. Mater. Civ. Eng., .
Bhutta, M. A. R., Hussin, W. M., Azreen, M., and Tahir, M. M. (2014). “Sulphate resistance of geopolymer concrete prepared from blended waste fuel ash.” J. Mater. Civ. Eng., .
BS (British Standard Institute). (2008). “Aggregates for concrete.” EN 12620:2002+A1:2008, London.
Chang, Z.-T., Song, X.-J., Munn, R., and Marosszeky, M. (2005). “Using limestone aggregates and different cements for enhancing resistance of concrete to sulphuric acid attack.” Cem. Concr. Res., 35(8), 1486–1494.
EPA. (2007). Field portable x-ray fluorescence spectrometry for the determination of elemental concentrations in soil and sediment (Method 6200), U.S. Environmental Protection Agency, Washington, DC.
Etxeberria, M., Fernandez, J. M., and Limeira, J. (2016). “Secondary aggregates and seawater employment for sustainable concrete dyke blocks production: Case study.” Constr. Build. Mater., 113, 586–595.
Fisher, L. R., and Lark, P. D. (1979). “An experimental study of the Washburn equation for liquid flow in very fine capillaries.” J. Colloid Interface Sci., 69(3), 486–492.
Frigione, M. (2010). “Recycling of PET bottles as fine aggregate in concrete.” Waste Manage., 30(6), 1101–1106.
Hobbs, D., and Taylor, M. (2000). “Nature of the thaumasite sulfate attack mechanism in field concrete.” Cem. Concr. Res., 30(4), 529–533.
IS (Bureau of Indian Standards). (1970). “Indian standard specification for coarse and fine aggregates from natural sources for concrete.” IS 383, New Delhi, India.
IS (Bureau of Indian Standards). (1983). “Indian standard specification for methods of test for aggregates for concrete.” IS 2386 (Part III), New Delhi, India.
IS (Bureau of Indian Standards). (1989). “43 grade ordinary Portland cement specification.” IS 8112, New Delhi, India.
IS (Bureau of Indian Standards). (2000). “Indian standard plain and reinforced concrete-code of practice.” IS 456, New Delhi, India.
IS (Bureau of Indian Standards). (2010). “Indian standard recommended guidelines for concrete mix design.” IS 10262, New Delhi, India.
IS (Bureau of Indian Standards). (2012). “Indian standard specification for cement concreting flooring tiles.” IS 1237, New Delhi, India.
Kumar, S., Gupta, R. C., and Shrivastava, S. (2016a). “Strength, abrasion and permeability studies on cement concrete containing quartz sandstone coarse aggregates.” Constr. Build. Mater., 125, 884–891.
Kumar, S., Gupta, R. C., Shrivastava, S., Csetenyi, L., and Thomas, B. S., (2016b). “Preliminary study on the use of quartz sandstone as a partial replacement of coarse aggregate in concrete based on clay content, morphology and compressive strength of combined gradation.” Constr. Build. Mater., 107, 103–108.
Marques, M. L., Chastre, C., and Vasconcelos, G. (2012). “Modelling the compressive mechanical behaviour of granite and sandstone historical building stones.” Constr. Build. Mater., 28(1), 372–381.
Matias, D., Brito, J. D., Rosa, A., and Pedro, D. (2014). “Durability of concrete with recycled coarse aggregates: Influence of superplasticizers.” J. Mater. Civ. Eng., .
Mohammed, T. U., Hasnat, A., Awal, M. A., and Bosunia, S. Z. (2015). “Recycling of brick aggregate concrete as coarse aggregate.” J. Mater. Civ. Eng., .
Monteny, J., et al. (2000). “Chemical, microbiological, and in situ test methods for biogenic sulphuric acid corrosion of concrete.” Cem. Concr. Res., 30, 623–634.
Nnadi, E. O., and Marriaga, J. L. (2013). “Acid corrosion of plain and reinforced concrete sewage systems.” J. Mater. Civ. Eng., 1353–1356.
Nosouhian, F., Mostofinejad, D., and Hasheminejad, H. (2016). “Concrete durability improvement in a sulfate environment using bacteria.” J. Mater. Civ. Eng., .
O’Connell, M., McNally, C., and Richardson, M. G. (2012). “Performance of concrete incorporating GGBS in aggressive wastewater environments.” Constr. Build. Mater., 27(1), 368–374.
Peyvandi, A., Holmes, D., Soroushian, P., and Balachandra, A. M. (2015). “Monitoring of sulfate attack in concrete by 27Al and29 Si MAS NMR spectroscopy.” J. Mater. Civ. Eng., .
Proverbio, E., and Carassiti, F. (1997). “Evaluation of chloride content in concrete by X-ray fluorescence.” Cem. Concr. Res., 27(8), 1213–1223.
Rezende, L. R. D., Silveira, L. R. D., Araújo, W. L. D., and Luz, M. R. D. (2014). “Reuse of fine quarry wastes in pavement: Case study in Brazil.” J. Mater. Civ. Eng., .
Sharma, R., and Bansal, P. P. (2015). “Use of different forms of waste plastic in concrete-review.” J. Clean. Prod., 112(1), 473–482.
Thomas, B. S., and Gupta, R. C. (2015). “Long term behaviour of cement concrete containing discarded tire rubber.” J. Cleaner Prod., 102, 78–87.
Verstrynge, E., Adriaens, R., Elsen, J., and Van Balen, K. (2014). “Multi-scale analysis on the influence of moisture on the mechanical behavior of ferruginous sandstone.” Constr. Build. Mater., 54, 78–90.
Yilmaz, M., and Tugrul, A. (2012). “The effects of different sandstone aggregates on concrete strength.” Constr. Build. Mater., 35, 294–303.
Zega, C. J., Di Maio, A. A., and Zerbino, R. L. (2014). “Influence of natural coarse aggregate type on the transport properties of recycled concrete.” J. Mater. Civ. Eng., .
Zhang, N., Yu, X., Pradhan, A., and Puppala, A. J. (2015). “Thermal conductivity of quartz sands by thermo-time domain reflectometry probe and model prediction.” J. Mater. Civ. Eng., .
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jun 28, 2016
Accepted: Oct 27, 2016
Published online: Feb 27, 2017
Published in print: Jun 1, 2017
Discussion open until: Jul 27, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.