Three-Dimensional Finite-Element Modeling for Asphalt Concrete Using Visual Cross-Sectional Imaging and Indirect Element Meshing Based on Discrete-Element Models
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 1
Abstract
Numerical simulation for asphalt concrete using the finite-element (FE) method has been widely explored during the last few decades. However, the FE model reconstructions for asphalt concrete samples are mainly limited to the X-ray imaging approach. Although some computer-generated FE models have been used in previous studies, related work is still at a very preliminary stage. Different from FE modeling for asphalt concrete, discrete element (DE) modeling has been well developed using user defined aggregate models with the aid of commercial software. This study aims to bridge the DE models with FE models for asphalt concrete by using virtual cross-sectional imaging and indirect cubic element meshing. In the first approach, virtual cross-sectional imaging is conducted to identify the areas occupied by aggregate particles and air voids. These virtual cross-sectional images are afterward stacked to form three-dimensional (3D) solid models. Then, the 3D solid models are triangularly meshed and imported into the FE simulation software, ABAQUS. By this means, an FE model with tetrahedral elements is reconstructed. In the second approach, arranged spheres are generated to fill the entire sample first. The circumscribed cubes of the spheres are found and regarded as the cubic elements in FE models. An input file containing elemental and nodal information is directly written by PFC3D using user-written functions. Then the input file is imported into ABAQUS, and an FE model with hexahedral elements is reconstructed. This study provides a new and effective approach for FE model reconstruction of asphalt concrete with user defined aggregate and air void models. Additionally, the advantages and limitations of the two approaches are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS [Computer software]. Dassault Systèmes, Providence, RI.
Al-Omari, A., and Masad, E. (2004). “Three dimensional simulation of fluid flow in X-ray CT images of porous media.” Int. J. Numer. Anal. Methods Geomech., 28(13), 1327–1360.
Aragão, F., Kim, Y., Lee, J., and Allen, D. (2010). “Micromechanical model for heterogeneous asphalt concrete mixtures subjected to fracture failure.” J. Mater. Civ. Eng., 30–38.
Bažant, Z., Tabbara, M., Kazemi, M., and Pijaudier-Cabot, G. (1990). “Random particle model for fracture of aggregate or fiber composites.” J. Eng. Mech., 1686–1705.
Caballero, A., López, C. M., and Carol, I. (2006). “3D meso-structural analysis of concrete specimens under uniaxial tension.” Comput. Methods Appl. Mech. Eng., 195(52), 7182–7195.
Carol, I., Lopez, C. M., and Roa, O. (2001). “Micromechanical analysis of quasi-brittle materials using fracture-based interface elements.” Int. J. Numer. Methods Eng., 52(1–2), 193–215.
Chen, S., Yang, X., You, Z., and Wang, M. (2016). “Innovation of aggregate angularity characterization using gradient approach based upon the traditional and modified Sobel operation.” Constr. Build. Mater., 120, 442–449.
Dai, Q., and Ng, K. (2014). “2D cohesive zone modeling of crack development in cementitious digital samples with microstructure characterization.” Constr. Build. Mater., 54(0), 584–595.
Dai, Q., and You, Z. (2008). “Micromechanical finite element framework for predicting viscoelastic properties of asphalt mixtures.” Mater. Struct., 41(6), 1025–1037.
Dong, Z., Tan, Y., and Cao, L. (2008). “The effect of water on pavement response based on 3D FEM simulation and experiment evaluation.” Pavements and materials, ASCE, Reston, VA, 34–44.
Ferellec, J., and McDowell, G. (2010a). “Modelling realistic shape and particle inertia in DEM.” Géotechnique, 60(3), 227–232.
Ferellec, J. F., and McDowell, G. R. (2008). “A simple method to create complex particle shapes for DEM.” Geomech. Geoeng., 3(3), 211–216.
Ferellec, J.-F., and McDowell, G. R. (2010b). “A method to model realistic particle shape and inertia in DEM.” Granular Matter, 12(5), 459–467.
Gao, H., Yang, X., and Zhang, C. (2015). “Experimental and numerical analysis of three-point bending fracture of pre-notched asphalt mixture beam.” Constr. Build. Mater., 90(0), 1–10.
Huang, H., and Tutumluer, E. (2014). “Image-aided element shape generation method in discrete-element modeling for railroad ballast.” J. Mater. Civ. Eng., 527–535.
ImageJ [Computer software]. National Institutes of Health, Bethesda, MD.
Jin, C., Yang, X., and You, Z. (2015a). “Automated real aggregate modelling approach in discrete element method based on X-ray computed tomography images.” Int. J. Pavement Eng., 1–14.
Jin, C., You, Z., Zhang, W., and Liu, K. (2015b). “Microstructural modeling method for asphalt specimens supporting 3D adaptive and automatic mesh generation.” J. Comput. Civ. Eng., 04015013.
Kim, Y.-R., Allen, D., and Little, D. (2006). “Computational model to predict fatigue damage behavior of asphalt mixtures under cyclic loading.” Transp. Res. Rec., 1970, 196–206.
Kutay, M. E., Arambula, E., Gibson, N., and Youtcheff, J. (2010). “Three-dimensional image processing methods to identify and characterise aggregates in compacted asphalt mixtures.” Int. J. Pavement Eng., 11(6), 511–528.
Kutay, M. E., Arambula, E., Gibson, N., Youtcheff, J., and Petros, K. (2009). “Use of artificial neural networks to detect aggregates in poor-quality X-ray CT images of asphalt concrete.” Airfield and highway pavements. Efficient pavements supporting transportation’s future, ASCE, Bellevue, WA.
Kutay, M. E., Aydilek, A. H., Masad, E., and Harman, T. (2007). “Computational and experimental evaluation of hydraulic conductivity anisotropy in hot-mix asphalt.” Int. J. Pavement Eng., 8(1), 29–43.
Li, N., Molenaar, A. A. A., van de Ven, M. F. C., and Wu, S. (2013). “Characterization of fatigue performance of asphalt mixture using a new fatigue analysis approach.” Constr. Build. Mater., 45(0), 45–52.
Liu, Y., and You, Z. (2009). “Visualization and simulation of asphalt concrete with randomly generated three-dimensional models.” J. Comput. Civ. Eng., 340–347.
Liu, Y., and You, Z. (2011). “Accelerated discrete-element modeling of asphalt-based materials with the frequency-temperature superposition principle.” J. Eng. Mech., 355–365.
López, C., Carol, I., and Aguado, A. (2008a). “Meso-structural study of concrete fracture using interface elements. I: Numerical model and tensile behavior.” Mater. Struct., 41(3), 583–599.
López, C., Carol, I., and Aguado, A. (2008b). “Meso-structural study of concrete fracture using interface elements. II: Compression, biaxial and Brazilian test.” Mater. Struct., 41(3), 601–620.
Lu, M., and McDowell, G. R. (2007). “The importance of modelling ballast particle shape in the discrete element method.” Granular Matter, 9(1–2), 69–80.
Lu, Y., and Garboczi, E. (2012). “Bridging the gap between random microstructure and 3D meshing.” J. Comput. Civ. Eng., 04014007.
Lutif, J., Souza, F., Kim, Y., Soares, J., and Allen, D. (2010). “Multiscale modeling to predict mechanical behavior of asphalt mixtures.” Transp. Res. Rec., 2181(-1), 28–35.
Mahmoud, E., Saadeh, S., Hakimelahi, H., and Harvey, J. (2013). “Extended finite-element modelling of asphalt mixtures fracture properties using the semi-circular bending test.” Road Mater. Pavement Des., 15(1), 153–166.
Masad, E., Jandhyala, V., Dasgupta, N., Somadevan, N., and Shashidhar, N. (2002). “Characterization of air void distribution in asphalt mixes using X-ray computed tomography.” J. Mater. Civ. Eng., 122–129.
Masad, E., Somadevan, N., Bahia, H., and Kose, S. (2001). “Modeling and experimental measurements of strain distribution in asphalt mixes.” J. Transp. Eng., 477–485.
Matsushima, T., and Saomoto, H. (2002). “Discrete element modeling for irregularly-shaped sand grains.” NUMGE2002: Numerical Methods in Geotechnical Engineering, Presses de l’ENPC/LCPC, Paris, 239–246.
Matsushima, T., Saomoto, H., Matsumoto, M., and Toda, K. (2003). “Discrete element simulation of an assembly of irregularly shaped grains: Quantitative comparison with experiments.” 16th ASCE Engineering Mechanics Conf., ASCE, Reston, VA.
Mimics [Computer software]. Materialise, Leuven, Belgium.
Ng, K., and Dai, Q. (2014). “Numerical investigation of internal frost damage of digital cement paste samples with cohesive zone modeling and SEM microstructure characterization.” Constr. Build. Mater., 50(0), 266–275.
Papagiannakis, A. T., Abbas, A., and Masad, E. (2002). “Micromechanical analysis of the viscoelastic properties of asphalt concretes.” Transp. Res. Rec., 1789, 113–120.
PFC3D version 4.0 [Computer software]. Itasca Consulting Group Inc., Minneapolis.
Schlangen, E., and Van Mier, J. G. M. (1992). “Micromechanical analysis of fracture of concrete.” Int. J. Damage Mech., 1(4), 435–454.
SolidWorks [Computer software]. Dassault Systèmes, Waltham, MA.
Souza, L., Kim, Y., Souza, F., and Castro, L. (2012). “Experimental testing and finite-element modeling to evaluate the effects of aggregate angularity on bituminous mixture performance.” J. Mater. Civ. Eng., 249–258.
Souza, L. T. (2009). “Investigation of aggregate angularity effects on asphalt concrete mixture performance using experimental and virtual asphalt samples.” Univ. of Nebraska, Lincoln, NE.
Stankowski, T. (1990). “Numerical simulation of progressive failure in particle composites.” Ph.D. dissertation, Dept. of Civil, Environmental, and Architectural Engineering, Univ. of Colorado, Boulder, CO.
Teixeira, J., Kim, Y.-R., Souza, F., Allen, D., and Little, D. (2014). “Multiscale model for asphalt mixtures subjected to cracking and viscoelastic deformation.” Transp. Res. Rec., 2447, 136–145.
Wang, D., Linbing, W., Christian, D., and Zhou, G. (2012). “Fatigue properties of asphalt materials at low in-service temperatures.” J. Mater. Civ. Eng., 1220–1227.
Wang, H., and Hao, P. (2011). “Numerical simulation of indirect tensile test based on the microstructure of asphalt mixture.” J. Mater. Civ. Eng., 21–29.
Wang, H., Zhang, C., Yang, L., and You, Z. (2013). “Study on the rubber-modified asphalt mixtures’ cracking propagation using the extended finite element method.” Constr. Build. Mater., 47(0), 223–230.
Wang, J., Navi, P., and Huet, C. (1997). “Numerical analysis of crack propagation in tension specimens of concrete considered as a 2D multicracked granular composite.” Mater. Struct., 30(1), 11–21.
Wang, L. (2003). “Stress concentration factor of poroelastic material by FEM simulation and X-ray tomography imaging.” ASCE Engineering Mechanics Conf., ASCE, Seattle.
Wang, X., Yang, Z., and Jivkov, A. P. (2015a). “Monte Carlo simulations of mesoscale fracture of concrete with random aggregates and pores: A size effect study.” Constr. Build. Mater., 80(0), 262–272.
Wang, X. F., Yang, Z. J., Yates, J. R., Jivkov, A. P., and Zhang, C. (2015b). “Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores.” Constr. Build. Mater., 75(0), 35–45.
Yang, X., Dai, Q., You, Z., and Wang, Z. (2014). “Integrated experimental-numerical approach for estimating asphalt mixture induction healing level through discrete element modeling of a single-edge notched beam test.” J. Mater. Civ. Eng., 04014259.
Yang, X., You, Z., Jin, C., and Wang, H. (2016a). “Aggregate representation for mesostructure of stone based materials using a sphere growth model based on realistic aggregate shapes.” Mater. Struct., 49(6), 2493–2508.
Yang, X., You, Z., Wang, Z., and Dai, Q. (2016b). “Review on heterogeneous model reconstruction of stone-based composites in numerical simulation.” Constr. Build. Mater., 117, 229–243.
Ying, H., Elseifi, M., Mohammad, L., and Hassan, M. (2014b). “Heterogeneous finite-element modeling of the dynamic complex modulus test of asphalt mixture using X-ray computed tomography.” J. Mater. Civ. Eng., 04014052.
You, T., Abu Al-Rub, R., Masad, E., and Little, D. (2013a). “Three-dimensional microstructural modeling of asphalt concrete by use of X-ray computed tomography.” Transp. Res. Rec., 2373(-1), 63–70.
You, T., Al-Rub, R., Masad, E., Kassem, E., and Little, D. (2013b). “Three-dimensional microstructural modeling framework for dense-graded asphalt concrete using a coupled viscoelastic, viscoplastic, and viscodamage model.” J. Mater. Civ. Eng., 607–621.
You, Z., Adhikari, S., and Dai, Q. (2008). “Three-dimensional discrete element models for asphalt mixtures.” J. Eng. Mech., 1053–1063.
You, Z., Adhikari, S., and Emin Kutay, M. (2009). “Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images.” Mater. Struct., 42(5), 617–630.
You, Z., and Buttlar, W. (2004). “Discrete element modeling to predict the modulus of asphalt concrete mixtures.” J. Mater. Civ. Eng., 140–146.
You, Z., and Dai, Q. (2007). “Dynamic complex modulus predictions of hot-mix asphalt using a micromechanical-based finite element model.” Can. J. Civ. Eng., 34(12), 1519–1528.
Yu, H., and Shen, S. (2012). “Impact of aggregate packing on dynamic modulus of hot mix asphalt mixtures using three-dimensional discrete element method.” Constr. Build. Mater., 26(1), 302–309.
Zelelew, H., and Papagiannakis, T. (2010a). “Simulation of asphalt concrete uniaxial creep using discrete element method (DEM).” Pavements and materials: Testing and modeling in multiple length scales, ASCE, Los Angeles.
Zelelew, H. M., Almuntashri, A., Agaian, S., and Papagiannakis, A. T. (2013). “An improved image processing technique for asphalt concrete X-ray CT images.” Road Mater. Pavement Des., 14(2), 341–359.
Zelelew, H. M., and Papagiannakis, A. T. (2009). “DEM simulation of asphalt concrete uniaxial creep.” 6th Int. Conf. on Maintenance and Rehabilitation of Pavements and Technological Control (MAIREPAV6), International Society for Maintenance and Rehabilitation of Transportation Infrastructure, Turin, Italy.
Zelelew, H. M., and Papagiannakis, A. T. (2010c). “Micromechanical modeling of asphalt concrete uniaxial creep using the discrete element method.” Road Mater. Pavement Des., 11(3), 613–632.
Zelelew, H. M., and Papagiannakis, A. T. (2011). “A volumetrics thresholding algorithm for processing asphalt concrete X-ray CT images.” Int. J. Pavement Eng., 12(6), 543–551.
Zhang, B., Wang, L., and Tumay, M. (2006). “An evaluation of the stress non-uniformity due to the heterogeneity of AC in the indirect tensile test.” R. Lytton Symp. on Mechanics of Flexible Pavement, ASCE, Baton Rouge, LA, 29–43.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 29 • Issue 1 • January 2017
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Feb 18, 2016
Accepted: Jun 2, 2016
Published online: Jul 28, 2016
Discussion open until: Dec 28, 2016
Published in print: Jan 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.