Quantifying Water Removal Rate of a Wicking Geotextile under Controlled Temperature and Relative Humidity
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 1
Abstract
Global warming and climate change have increased the frequency of heavy precipitation. Heavy rainfall results in a large amount of water entering roadways within a short time period. Water remains in the pavement system for a certain time period, reduces strengths and moduli of granular bases and subgrades, and induces pavement distresses. Geotextiles are commonly used in roadways for drainage purposes, which require soil saturation. However, soil saturation does not always exist in roadways to enable gravity drainage of water by conventional geotextiles. Wicking geotextile, a new type of woven geotextile, was recently introduced to the market to remove moisture from unsaturated soils. The wicking geotextile includes special hydrophilic and hygroscopic 4 deep groove fibers with multichannel cross sections, which can induce high capillary force to wick water out of moist soil without saturation of soil. The ability and rate of this geotextile to remove water from moist soil depends on several factors, including temperature and relative humidity. In this study, a series of laboratory tests under controlled temperature and relative humidity were conducted to quantify the water removal rate of the wicking geotextile. A half length of the wicking geotextile was submerged in water tanks, and the other half was hung outside of the tanks. The water wicked from the tank into the geotextile evaporated into the air. Such tests were conducted under 12 different test conditions (i.e., different temperatures and relative humidities). Test results demonstrated that the wicking geotextile could remove water from the water tank at a certain rate. Three commonly used methods available in the literature were adopted to quantify the water removal rate of the wicking geotextile based on vapor pressure, temperature, and relative humidity. A new concept of equivalent water evaporation length of a wicking geotextile is proposed in this study. It should be pointed out that the tests presented in this paper aimed to determine the maximum water removal capacity of the geotextile given sufficient water supply.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was sponsored by TenCate (Geosynthetics, Pendergrass, GA), which also provided the wicking geotextile used in the study. Mr. Brett Odgers, Director of Roadway Reinforcement at TenCate, provided technical guidance for the study. The authors gratefully acknowledge their support.
References
Allen, M., and Ingram, W. J. (2002). “Constraints on future changes in climate and the hydrologic cycle.” Nature, 419(6903), 224–232.
Azevedo, M., and Zornberg, J. G. (2013). “Capillary barrier dissipation by new wicking geotextile.” Proc., Advances in Unsaturated Soils First Pan-American Conf. on Unsaturated Soils, Caicedo, et al., eds., Taylor & Francis Group, London, 559–565.
Barksdale, R. D., and Itani, S. Y. (1989). “Influence of aggregate shape on base behaviour.” Transp. Res. Rec., 1227, 173–182.
Bear, J. (1972). Dynamics of fluids in porous media, Elsevier, New York.
Bosen, J. F. (1960). “A formula for approximation of saturation vapor pressure over water.” Mon. Weather Rev., 88(8), 275–276.
Dawson, A. R., Thom, N. H., and Paute, J. L. (1996). “Mechanical characteristics of unbound granular materials as a function of condition.” Proc., Flexible Pavements, Eur. Symp. Euroflex 1993, A. G. Correia, ed., Balkema, Rotterdam, Netherlands, 35–44.
Dore, M. H. I. (2005). “Climate change and changes in global precipitation patterns: What do we know?” Environ. Int., 31(8), 1167–1181.
El-Gamal, M. A. L., and El-Shafey, M. (2000). “Performance of drainage Geotextiles for sustainable development of soil and water resources in Egypt.” Cairo Univ., Cairo, Egypt, 1–13.
Gillis, J. (2016). “Short answers to hard questions about climate change.” 〈http://www.nytimes.com/interactive/2015/11/28/science/what-is-climate-change.html?_r=0〉 (Jan. 2, 2016).
Han, J. (2015). Principles and practice of ground improvement, Wiley, Hoboken, NJ, 432.
Han, J., and Shiwakoti, H. (2016). “Wheel tracking methods to evaluate moisture sensitivity of hot-mix asphalt mixtures.” Front. Archit. Civ. Eng. China, 10(1), 30–43.
Han, J., and Zhang, X. (2014). “Recent advances in the use of geosynthetics to enhance sustainability of roadways.” Invited Keynote Lecture, Conf. on Advances in Civil Engineering for Sustainable Development, Nakhon Ratchasima, Thailand.
Han, J., Zhang, X., Guo, J., and Wang, F. (2016). “Laboratory evaluation of wickability of wicking fabrics under controlled temperature and relative humidity.” Proc., 3rd Pan-American Conf. on Geosynthetics, Vol. 2, IGS North America, Jupiter, FL, 1203–1209.
Haynes, J. G., and Yoder, E. J. (1963). “Effects of repeated loading on gravel and crushed stone base course materials used in the AASHTO road test.”, Purdue Univ., West Lafayette, IN.
Helmig, R. (1997). Multiphase flow and transport processes in the subsurface: A contribution to the modeling of hydrosystems, Springer, Berlin.
Hicks, R. G., and Monismith, C. L. (1971). “Factors influencing the resilient properties of granular materials.” Hwy. Res. Rec., 345, 15–31.
Ho, A. F. (2000). “Experimental and numerical investigation of infiltration ponding in one-dimensional sand-geotextile columns.” M.Sc. thesis, Queen’s Univ., Kingston, ON, Canada, 212.
Holtz, R. D., Christopher, B. R., and Ryan, R. B. (1997). Geosynthetic engineering, BiTech Publishers, Richmond, BC, Canada.
Iryo, T., and Rowe, R. K. (2004). “Numerical study of infiltration into a soil-geotextile column.” Geosynthetics Int., 11(5), 377–389.
Iryo, T., and Rowe, R. K. (2005). “Hydraulic behaviour of soil-geocomposite layers in slopes.” Geosynthetics Int., 12(3), 145–155.
Koener, R. M. (2012). Designing with geosynthetics, 4th Ed., Prentice Hall, Upper Saddle River, NJ.
Lee, S., and Bourdeau, P. L. (2006). “Filter performance and design for highway drains.”, Joint Transportation Research Program.
Milly, P. C. D., Dunne, K. A., and Vecchia, A. V. (2005). “Global pattern of trends in streamflow and water availability in a changing climate.” Nature, 438(7066), 347–350.
Parish, O. O., and Putnam, T. W. (1997). “Equations for the determination of humidity from dewpoint and psychrometric data.”, NASA, Washington, DC, 25.
Qian, Y., Han, J., Pokharel, S. K., and Parsons, R. L. (2013). “Performance of triangular aperture geogrid-reinforced base courses over weak subgrade under cyclic loading.” J. Mater. Civ. Eng., 1013–1021.
Romanenko, V. A. (1961). “Computation of the autumn soil moisture using a universal relationship for a large area.” Proc., Ukrainian Hydrometeorol. Research Institute, Vol. 3, Kiev, Ukraine.
Singh, V. P., and Xu, C. Y. (1997). “Evaluation and generalization of 13 mass-transfer equations for determining free water evaporation.” Hydrol. Process, 11(3), 311–323.
Stormont, J. C., Henry, K. S., and Evans, T. M. (1997). “Water retention functions of four nonwoven polypropylene geotextiles.” Geosynthetics Int., 4(6), 661–672.
Szymkiewicz, A. (2007). “Numerical simulation of one-dimensional two-phase flow in porous media.” Arch. Hydro-Eng. Environ. Mech., 54(2), 117–136.
Xu, Y. S., Huang, R. Q., Han, J., and Shen, S. L. (2013). “Evaluation of allowable withdrawn volume of groundwater based on observed data.” Nat. Hazards, 67(2), 513–522.
Zhang, X., Presler, W., Li, L., Jones, D., and Odgers, B. (2014). “Use of wicking fabric to help prevent frost boils in Alaskan pavements.” J. Mater. Civ. Eng., 728–740.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jan 26, 2016
Accepted: Jun 2, 2016
Published online: Jul 28, 2016
Discussion open until: Dec 28, 2016
Published in print: Jan 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.