Exploring the Effect of Asphalt-Concrete Fabrication and Compaction Location on Six Compaction Metrics
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 12
Abstract
Ensuring proper compaction of asphalt concrete in the field is necessary for high performance of pavements, and understanding how different asphalt concrete technologies compact can lead to better compaction in the field. This research examines a chemically modified warm-mix asphalt material that was (1) plant mixed, lab compacted; (2) reheated, plant mixed, lab compacted; and (3) lab mixed, lab compacted, and explores how changing the compaction temperatures and compaction pressures influences the compaction characteristics in the lab. In addition, the chemically modified warm-mix asphalt was compared to foamed material and traditional hot-mix asphalt in the lab-mixed lab-compacted state. Overall, workability energy index (WEI), compactability energy index (CEI), compaction densification index (CDI), and number of gyrations required to reach 92% maximum specific gravity () (N92) followed expected trends of increasing compaction effort required with decreasing temperature or pressure, while locking point and gyratory compactibility index (GCI) did not. For the chemically modified warm-mix asphalt, WEI provided the most-consistent results across sample preparation methods, compaction temperatures, and compaction pressures. However, trends were not as clear when comparing chemically modified warm-mix asphalt, foamed warm-mix asphalt, and hot-mix asphalt.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The University of Arkansas thanks Road Science, especially Craig Good, Lou Harper, and A.J. Jensen, for their generous assistance with this project; APAC-Kansas and Max VanArsdale; and Cory Bramlett, Reihle Saldana, Zachary Lemmon, Airam Morales, and Elvis Castillo for their assistance in the laboratory.
References
AASHTO. (2001). “Standard method of test for determining the percentage of fracture in coarse aggregate.” AASHTO TP61-01, Washington, DC.
AASHTO. (2005). “Standard method of test for materials finer than 75-μm (No. 200) sieve in mineral aggregates by washing.” AASHTO T11-13, Washington, DC.
AASHTO. (2008). “Standard method of test for plastic fines in graded aggregates and soils by use of the sand equivalent test.” AASHTO T176-13, Washington, DC.
AASHTO. (2011). “Standard method of test for uncompacted void content of fine aggregate.” AASHTO T304-15, Washington, DC.
AASHTO. (2014). “Standard method of test for reducing samples of aggregate to testing size.” AASHTO T248-14, Washington, DC.
Abu Abdo, A., Bayomy, F., Nielsen, R., Weaver, T., Jung, S., and Santi, M. (2010). “Development and evaluation of hot mix asphalt stability index.” Int. J. Pavement Eng., 11(6), 529–539.
ASTM. (2016a). “Standard practice for reducing samples of aggregate to testing size.” ASTM C702-11, West Conshohocken, PA.
ASTM. (2016b). “Standard test method for compaction and shear properties of bituminous mixtures by means of the U.S. corps of engineers gyratory testing machine (GTM).” ASTM D3387-11, West Conshohocken, PA.
Bahia, H., Friemel, T., Peterson, P., Russell, J., and Poehnelt, B. (1998). “Optimization of constructibility and resistance to traffic: A new design approach for HMA using the superpave compactor.” Assoc. Asphalt Paving Technol., 67, 189–232.
Braham, A., Steger, R., Lynn, T., and Pyle, R. (2015). “Characterizing compactability of high RAP and warm mix asphalt mixtures in the superpave gyratory compactor.” J. Test. Eval., 43(3), 535–543.
Butcher, M. (1998). “Determining gyratory compaction characteristics using servopac gyratory compactor.” Transp. Res. Rec., 1630, 89–97.
De Sombre, R., Newcomb, D., Chadbourn, B., and Voller, V. (1998). “Parameters to define the laboratory compaction temperature range of hot-mix asphalt.” Assoc. Asphalt Paving Technol., 67, 125–142.
Dessouky, S., Pothuganti, A., Walubita, L., and Rand, D. (2013). “Laboratory evaluation of the workability and compactability of asphaltic materials prior to road construction.” J. Mater. Civ. Eng., 810–818.
Gibson, N., and Li, X. (2011). “Mechanistic characterization of aggregate packing to assess gyration levels during HMA mix design.” Assoc. Asphalt Paving Technol., 80, 33–64.
Guler, M., Bahia, H., Bosscher, P., and Plesha, M. (2000). “Device for measuring shear resistance of hot-mix asphalt in gyratory compactor.” Transp. Res. Rec., 1723, 116–124.
Hanz, A., Faheem, A., Mahmoud, E., and Bahia, H. (2010). “Measuring effects of warm-mix additives use of newly developed asphalt binder lubricity test for the dynamic shear rheometer.” Transp. Res. Rec., 2180, 85–92.
Hanz, A., Mahmoud, E., and Bahia, H. (2011). “Asphalt lubricity test evaluation and relationship to mixture workability.” Proc., 90th Annual Meeting of the Transportation Research Board (CD-ROM), Transportation Research Board, Washington, DC.
Leiva, F., and West, R. (2008). “Analysis of hot-mix asphalt lab compactability using lab compaction parameters and mix characteristics.” Transp. Res. Rec., 2057, 89–98.
Mallick, R. (1999). “Use of Superpave gyratory compactor to characterize hot-mix asphalt.” Transp. Res. Rec., 1681, 86–96.
Schmitt, R., Johnson, C., Bahia, H., and Hanz, A. (2009). “Effects of temperature and compaction effort on field and lab densification of HMA.” Assoc. Asphalt Paving Technol., 78, 171–208.
Vavrik, W., Fries, R., and Carpenter, S. (1999). “Effect of flat and elongated coarse aggregate on characteristics of gyratory compacted samples.” Transp. Res. Rec., 1681, 28–36.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 16, 2015
Accepted: May 2, 2016
Published online: Jul 14, 2016
Published in print: Dec 1, 2016
Discussion open until: Dec 14, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.