Coupled Navier–Stokes Phase-Field Model to Evaluate the Microscopic Phase Separation in Asphalt Binder under Thermal Loading
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 10
Abstract
The evolution of asphalt microstructures under thermal loading has always been a critical issue for pavement engineers. Previous researches show that phase separation will greatly affect the mechanical performance of asphalt at microscale. To analyze this important phenomenon, the conserved phase-field model is coupled with the Navier–Stokes equation to simulate the phase kinetics in this paper. The asphalt is chemically simplified to a quaternary system consisting of four chemical components: asphaltene, resin, oil, and wax. The coupled Navier–Stokes phase-field system is solved in a unified finite element framework in COMSOL software. It is observed that phase separation has a significant influence on the thermal stress distribution. Moreover, stress concentration is observed at the interfaces between different phases, which may result in microcracks. This conclusion is validated by atomic-force microscopy (AFM) experiment results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first author would like to express sincere gratitude to Dr. Troy Pauli at Western Research Institute for sharing the AFM experiment results. The research performed in this paper is supported by Natural Science Foundation of Shandong Province (ZR2015EQ009), the Fundamental Research Funds of Shandong University (2015HW024), and China Postdoctoral Science Foundation Funded Project (2015M582093).
References
Bhasin, A., Bommavaram, R., Greenfield, M., and Little, D. (2011). “Use of molecular dynamics to investigate self-healing mechanisms in asphalt binders.” J. Mater. Civ. Eng., 485–492.
Branthaver, J., et al. (1993). “SHRP-A-368: Binder characterization and evaluation. Volume 2: Chemistry.” Strategic Highway Research Program, National Research Council, Washington, DC.
Buckley, J., Hirasaki, G., Liu, Y., von Drasek, S., Wang, J., and Gill, B. (2007). “Asphaltene precipitation and solvent properties of crude oils.” Pet. Sci. Technol., 16(3–4), 251–285.
Cahn, J., and Hilliard, J. E. (1958). “Free energy of a nonuniform system. I: Interfacial free energy.” J. Chem. Phys., 28(2), 258–267.
COMSOL version 4.1 [Computer software]. COMSOL, Burlington, MA.
Das, P., Jelagin, D., Birgisson, B., and Kringos, N. (2011). “Micro-mechanical investigation of low temperature fatigue cracking behavior of bitumen.” 7th RILEM Int. Conf. on Cracking in Pavements, Vol. 4, RILEM, Springer, Dordrecht, Netherlands, 1281–1290.
Das, P., Kringos, N., Wallqvist, V., and Birgisson, B. (2013). “Micro-mechanical investigation of phase separation in bitumen by combining atomic force microscopy with differential scanning calorimetry results.” Road Mater. Pavement Des., 14(Suppl. 1), 25–37.
De Moraes, M., Pereira, R., Simao, R., and Leite, L. (2010). “High temperature AFM study of CAP 30/45 pen grade bitumen.” J. Microsc., 239(1), 46–53.
Hou, Y., Wang, L., Yue, P., Pauli, T., and Sun, W. (2014). “Modeling mode I cracking failure in asphalt binder by using nonconserved phase-field model.” J. Mater. Civ. Eng., 684–691.
Kringos, N., Schmets, A., Scarpas, A., and Pauli, T. (2011). “Towards an understanding of the self-healing capacity of asphaltic mixtures.” Heron, 56(1/2), 45–74.
Kriz, P., Stastna, J., and Zanzotto, L. (2011). “Glass transition and phase stability in asphalt binders.” Road Mater. Pavement Des., 9(1), 37–65.
Loeber, L., Muller, G., Morel, J., and Sutton, O. (1998). “Bitumen in colloid science: A chemical, structural and rheological approach.” Fuel, 77(13), 1443–1450.
Loeber, L., Sutton, O., Morel, J., Valleton, J., and Muller, G. (1996). “New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy.” J. Microsc.-Oxford, 182(1), 32–39.
Nguyen, Q., Benedetto, H., and Sauzeat, C. (2012). “Determination of thermal properties of asphalt mixtures as another output from cyclic tension-compression test.” Road Mater. Pavement Des., 13(1), 85–103.
Ortega-Rodriguez, A., Lira-Galeana, C., Ruiz-Morales, Y., and Cruz, S. (2001). “Interaction energy in maya-oil asphaltenes: A molecular mechanics study.” Pet. Sci. Technol., 19(1–2), 245–256.
Pauli, A. T., Grimes, R. W., Beemer, A. G., Turner, T. F., and Branthaver, J. F. (2011). “Morphology of asphalts, asphalt fractions and model wax-doped asphalts studied by atomic force microscopy.” Int. J. Pavement Eng., 12(4), 291–309.
Ponniah, J. E., Cullen, R. A., and Hesp, S. (1996). “Fracture energy specifications for modified asphalts.” Proc. ACS Div. Fuel Chem., 41(4), 1317–1321.
Poulikakos, L., and Partl, M. (2010). “Investigation of porous asphalt microstructure using optical and electron microscopy.” J. Microsc., 240(2), 145–154.
Read, J., and Whiteoak, D. (2003). The Shell bitumen handbook, 5th Ed., Thomas Telford, London.
Schmets, A., Kringos, N., Pauli, T., Redelius, P., and Scarpas, T. (2010). “On the existence of wax-induced phase separation in bitumen.” Int. J. Pavement Eng., 11(6), 555–563.
Tashman, L., Masad, E., Little, D., and Zbib, H. (2005). “A microstructure-based viscoplastic model for asphalt concrete.” Int. J. Plast., 21(9), 1659–1685.
Wahle, C., Ross, D., and Thurston, G. M. (2012). “Mathematical and computational aspects of quaternary liquid mixing free energy measurement using light scattering.” J. Chem. Phys., 137(3), 034202.
Yang, X., and Kilpatrick, P. (2005). “Asphaltene and waxes do not interact synergistically and coprecipitate in solid organic deposits.” Energy Fuels, 19(4), 1360–1375.
Zborowski, A., and Kaloush, K. (2011). “Predictive equations to evaluate thermal fracture of asphalt rubber mixtures.” Road Mater. Pavement Des., 8(4), 819–833.
Zhang, L., and Greenfield, M. L. (2008). “Effects of polymer modification on properties and microstructure of model asphalt systems.” Energy Fuels, 22(5), 3363–3375.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 6, 2015
Accepted: Dec 30, 2015
Published online: May 2, 2016
Published in print: Oct 1, 2016
Discussion open until: Oct 2, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.