Tensile Strength of Fiber-Reinforced Soil
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 7
Abstract
The tensile strength of soil is an important mechanical parameter that controls the development of tension cracks. In this study, randomly distributed polypropylene fibers were employed to improve soil tensile behavior. Direct tensile tests were conducted on fiber-reinforced soil specimens with different fiber contents and compacted at different water contents and dry densities. Desiccation tests were also performed to evaluate the effectiveness of fiber reinforcement in improving soil tensile cracking resistance. The tensile test results showed that fiber inclusion significantly increased the soil peak strength, reduced the postpeak strength, and changed the brittle tensile failure behavior to a more ductile one. Soil tensile strength increased with the increase in fiber content. The tensile strength of both reinforced and unreinforced specimens decreased with increasing water content and increased with increasing dry density. Moreover, a higher soil dry density showed a more positive effect in mobilizing the reinforcement benefit of fibers. Based on the fiber/soil interfacial interaction mechanisms, the fiber reinforcement benefits on soil tensile behavior were analyzed. A linear relationship was obtained between the fiber reinforcement benefit and the fiber/soil interfacial shear strength. The desiccation test results showed that fiber inclusion significantly decreased soil cracking. The surface crack reduction ratio increased while the average crack width and length decreased with increasing fiber content, suggesting that fiber reinforcement was efficient in impeding soil tensile failure.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the support of the National Natural Science Foundation of China for Excellent Young Scholars (Grant 41322019), the National Natural Science Foundation of China (Grant 41572246), the Key Project of the National Natural Science Foundation of China (Grant 41230636), and the National Basic Research Program of China (973 Program, 2011CB710605). The authors also wish to acknowledge the support of the European Commission via the Marie Curie IRSES project GREAT—Geotechnical and Geological Responses to Climate Change: Exchanging Approaches and Technologies on a World-Wide Scale (FP7-PEOPLE-2013-IRSES- 612665).
References
Ahmad, F., Bateni, F., and Azmi, M. (2010). “Performance evaluation of silty sand reinforced with fibers.” Geotext. Geomembr., 28(1), 93–99.
Ajaz, A., and Parry, R. H. G. (1975). “Stress-strain behavior of two compacted clays in tension and compression.” Geotechnique, 25(3), 495–512.
Albrecht, B. A., and Benson, C. H. (2001). “Effect of desiccation on compacted natural clay.” J. Geotech. Geoenviron. Eng., 67–75.
Alwahab, R. M., and Al-ourna, H. H. (1995). “Fiber reinforced cohesive soils for application in compacted earth structures.” Proc., Geosynthetics’95, Vol. 2, Industrial Fabrics Association International, Nashville, TN, 433–446.
Arslan, H., Sture, S., and Batiste, S. (2008). “Experimental simulation of tensile behavior of lunar soil simulant JSC-1.” Mater. Sci. Eng., 478(1–2), 201–207.
ASTM. (2005). “Standard test methods for laboratory compaction characteristics of soil using standard effort.”, West Conshohocken, PA.
Barzegar, A. R., Oades, J. M., Rengasamy, P., and Murray, R. S. (1995). “Tensile strength of dry, remoulded soils as affected by properties of the clay faction.” Geoderma, 65(1–2), 93–108.
Biazejczak, D., Horn, R., and Pytka, J. (1995). “Soil tensile strength as affected by time, water content and bulk density.” Int. Agrophys., 9(3), 179–188.
Casagrande, M. D. T., Coop, M. R., and Consoli, N. C. (2006). “Behavior of a fiber-reinforced bentonite at large shear displacements.” J. Geotech. Geoenviron. Eng., 1505–1508.
Consoli, N. C., Bassani, M. A. A., and Festugato, L. (2010). “Effect of fiber-reinforcement on the strength of cemented soils.” Geotext. Geomembr., 28(4), 344–351.
Consoli, N. C., Casagrande, M. D. T., and Coop, M. R. (2005). “Effect of fiber reinforcement on the isotropic compression behavior of a sand.” J. Geotech. Geoenviron. Eng., 1434–1436.
Consoli, N. C., Casagrande, M. D. T., and Coop, M. R. (2007a). “Performance of fibre-reinforced sand at large shear strains.” Géotechnique, 57(9), 751–756.
Consoli, N. C., Casagrande, M. D. T., Prietto, P. D. M., and Thomé, A. (2003). “Plate load test on fiber-reinforced soil.” J. Geotech. Geoenviron. Eng., 951–955.
Consoli, N. C., Casagrande, M. D. T., Thome, A., Rosa, F. D., Fahey, M. (2009a). “Effect of relative density on plate tests on fibre-reinforced sand.” Geotechnique, 59(5), 471–476.
Consoli, N. C., Cruz, R. C., Floss, M. F., and Festugato, L. (2009b). “Parameters controlling tensile and compressive strength of artificially cemented sand.” J. Geotech. Geoenviron. Eng., 136(6), 759–763.
Consoli, N. C., da Fonseca, A. V., Cruz, R. C., and Silva, S. R. (2011a). “Voids/cement ratio controlling tensile strength of cement-treated soils.” J. Geotech. Geoenvion. Eng., 1126–1131.
Consoli, N. C., de Moraes, R. R., and Festugato, L. (2011b). “Split tensile strength of monofilament polypropylene fiber-reinforced cemented sandy soils.” Geosynthetics Int., 18(2), 57–62.
Consoli, N. C., Heineck, K. S., Casagrande, M. D. T., and Coop, M. R. (2007b). “Shear strength behavior of fiber-reinforced sand considering triaxial tests under distinct stress paths.” J. Geotech. Geoenviron. Eng., 1466–1469.
Consoli, N. C., Prietto, P. D. M., and Ulbrich, L. A. (1998). “Influence of fiber and cement addition on behavior of sandy soil.” J. Geotech. Geoenviron. Eng., 1211–1214.
Dall’Acqua, G. P. (2000). “Fibre reinforced stabilized soil.” Ph.D. thesis, Univ. of Birmingham, Birmingham, U.K.
Das, B. M., Yen, S. C., and Dass, R. N. (1995). “Brazilian tensile strength test of lightly cemented sand.” Can. Geotech. J., 32(1), 166–171.
Divya, P. V., Viswanadham, B. V. S., and Gourc, J. P. (2014). “Evaluation of tensile strength-strain characteristics of fiber reinforced soil through laboratory tests.” J. Mater. Civ. Eng., 14–23.
Fang, H. Y., and Chen, W. F. (1971). “New method for determination of tensile strength of soils.” Highway Res. Rec., 345, 62–68.
Favaretti, M. (1996). “Tensile strength of compacted clays.” Proc., 1st Int. Conf. on Unsaturated Soils (UNSAT 95), E. E. Alonzo and P. Delage, ed., Vol. 1, Balkema, Rotterdam, Netherlands, 51–56.
Ghosh, A., and Subbarao, C. (2006). “Tensile strength bearing ratio and slake durability of class F fly ash stabilized with lime and gypsum.” J. Mater. Civ. Eng., 18–27.
Gray, D. H. (1970). “Role of woody vegetation in reinforcing soils and stabilizing slopes.” Proc., Symp. on Soil Reinforcement and Stabilizing Techniques, Sydney, Australia, 253–306.
Gray, D. H., and Maher, M. H. (1989). “Admixture stabilization of sand with discrete randomly distributed fibers.” Proc., XII Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 2, Rio de Janeiro, Brazil, 1363–1366.
Gray, D. H., and Ohashi, H. (1983). “Mechanics of fiber-reinforcement in sand.” J. Geotech. Eng., 335–353.
Gregory, G. H. (1999). “Theoretical shear-strength model of fiber-soil composite.” Proc., ASCE Texas Section Spring Meeting, ASCE, Reston, VA, 1–10.
Hagner, T. (2005). “Shrinkage characteristics and tensile strength of cohesive soils.” Master’s thesis, Bauhaus Univ., Weimar, Germany and Nanyang Technological Univ., Singapore.
Hendry, M. T., Sharma, J. S., Matin, C. D., and Barbour, S. L. (2012). “Effect of fiber content ad structure on anisotropic elastic stiffness and shear strength of peat.” Can. Geotech. J., 49(4), 403–415.
Ibraim, E., Diambra, A., Russell, A. R., and Muir Wood, D. (2012). “Assessment of laboratory sample preparation for fibre reinforced sands.” Geotext. Geomembr., 34, 69–79.
Kaniraj, S. R., and Havanagi, V. G. (2001). “Behavior of cement-stabilized fiber-reinforced flyash-soil mixtures.” J. Geotech. Geoenviron. Eng., 574–584.
Kim, T. H. (2001). “Moisture-induced tensile strength and cohesion in sand.” Ph.D. dissertation, Univ. of Colorado, Boulder, CO.
Kim, T. H., Kim, C. K., Jung, S. J., and Lee, J. H. (2007). “Tensile strength characteristics of contaminated and compacted sand-bentonite mixtures.” Environ. Geol., 52(4), 653–661.
Kim, T. H., Kim, T. H., Kang, G. C., and Ge, L. (2012). “Factors influencing crack-induced tensile strength of compacted soil.” J. Mater. Civ. Eng., 315–320.
Kim, T. H., and Sture, S. (2008). “Capillary induced tensile strength in unsaturated sands.” Can. Geotech. J., 45(5), 726–737.
Lakshmikantha, M. R. (2009). “Experimental and theoretical analysis of cracking in drying soils.” Ph.D. dissertation, Universitat Politecnica de Catalunya, Barcelona, Spain.
Lakshmikantha, M. R., Prat, P. C., and Ledesma, A. (2012). “Experimental evidences of size-effect in soil cracking.” Can. Geotech. J., 49(3), 264–284.
Li, J., Tang, C. S., Wang, D. Y., Pei, X. J., and Shi, B. (2014). “Effect of discrete fiber reinforcement on soil tensile strength.” J. Rock Mech. Geotech. Eng., 6, 133–137.
Liu, C., Tang, C. S., Shi, B., and Suo, W. B. (2013). “Automatic quantification of crack patterns by image processing.” Comput. Geosci., 57, 77–80.
Liu, J., Wang, G., Kamai, T., Zhang, F., Yang, J., and Shi, B. (2011). “Static liquefaction behavior of saturated fiber-reinforced sand in undrained ring-shear tests.” Geotext. Geomembr., 29(5), 462–471.
Lloret, A., Ledesma, A., Rodríguez, R. L., Sánchez, M. J., Olivella, S., and Suriol, J. (1998). “Crack initiation in drying soils.” Proc., 2nd Int. Conf. on Unsaturated Soils, International Academic Publisher, Beijing.
Maher, M. H., and Gray, D. H. (1990). “Static response of sands reinforced with randomly distributed fibers.” J. Geotech. Eng. Div., 1661–1677.
Mesbah, A., Morel, J. C., and Ghavami, K. H. (2004). “Development of a direct tensile test for compacted earth blocks reinforced with natural fibers.” J. Geotech. Geoenviron. Eng., 16(1), 95–98.
Miller, C. J., Mi, H., and Yesiller, N. (1998). “Experimental analysis of desiccation crack propagation in clay liners.” J. Am. Water Resour. Assoc., 34(3), 677–686.
Miller, C. J., and Rifai, S. M. (2004). “Fiber reinforcement for waste containment soil liner.” J. Environ. Eng., 891–895.
Moraci, N., and Recalcati, P. (2006). “Factors affecting the pullout behavior of extruded geogrids embedded in a compacted granular soil.” Geotext. Geomembr., 24(4), 220–242.
Morris, P. H., Graham, J., and Williams, D. J. (1992). “Cracking in drying soils.” Can. Geotech. J., 29(2), 263–277.
Mosaid, A. (1981). “Tensile properties of compacted soils, laboratory Shear Strength of Soil.” ASTM STP 740, West Conshohocken, PA, 207–225.
Nahlawi, H., Chakrabarti, S., and Kodikara, J. (2004). “A direct tensile strength testing method for unsaturated geomaterials.” Geotech. Testing J., 27(4), 1–6.
Nataraj, M. S., and McManis, K. L. (1997). “Strength and deformation properties of soils reinforced with fibrillated fibers.” Geosynthetics Int., 4(1), 65–79.
Péron, H., Herchel, T., Laloui, L., and Hu, L. B. (2009). “Fundamentals of desiccation cracking of fine-grained soils: Experimental characterization and mechanisms identification.” Can. Geotech. J., 46(10), 1177–1201.
Plé, O., and Lê, T. N. H. (2012). “Effect of polypropylene fiber-reinforcement on the mechanical behavior of silty clay.” Geotext. Geomembr., 32, 111–116.
Prabakar, J., and Sridhar, R. S. (2002). “Effect of random inclusion of sisal fibre on strength behavior of soil.” Constr. Build. Mater., 16(2), 123–131.
Racana, N., Grédiac, M., and Gourvès, R. (2003). “Pull-out response of corrugated geotextile strips.” Geotext. Geomembr., 21(5), 265–288.
Ranjan, G., Vasan, R. M., and Charan, H. D. (1996). “Probabilistic analysis of randomly distributed fiber-reinforced soil.” J. Geotech. Eng., 419–426.
Rifai, S. M., and Miller, C. J. (2009). “Theoretical assessment of increased tensile strength of fibrous soil undergoing desiccation.” J. Geotech. Geoenviron. Eng., 1857–1862.
Rodríguez, R., Sanchez, M., Ledesma, A., and Lloret, A. (2007). “Experimental and numerical analysis of desiccation of a mining waste.” Can. Geotech. J., 44(6), 644–658.
Santoni, R. L., Tingle, J. S., and Webster, S. L. (2001). “Engineering properties of sand-fiber mixtures for road construction.” J. Geotech. Geoenviron. Eng., 258–268.
Sobhan, K., and Mashnad, M. (2002). “Tensile strength and toughness of soil-cement–fly-ash composite reinforced with recycled high-density polyethylene strips.” J. Mater. Civ. Eng., 177–184.
Soni, D. K., and Jain, A. (2008). “Effect of freezing-thawing and wetting-drying on tensile strength of lime-fly ash stabilized black cotton soil.” Proc., 12th Int. Conf. Int. Association for Computer Methods and Advances in Geomechanics (IACMAG), Goa, India.
Tamrakar, S. B., Toytosawa, Y., Mitachi, T., and Itoh, K. (2005). “Tensile strength of compacted and saturated soils using newly developed tensile strength measuring apparatus.” Soils Found., 45(6), 103–110.
Tang, C. S., Cui, Y. J., Tang, A. M., and Shi, B. (2010a). “Experiment evidence on the temperature dependence of desiccation cracking behavior of clayey soils.” Eng. Geol., 114(3–4), 261–266.
Tang, C. S., Shi, B., Cui, Y. J., Liu, C., and Gao, L. (2012). “Desiccation cracking behavior of polypropylene fiber-reinforced clay soil.” Can. Geotech. J., 49(9), 1088–1101.
Tang, C. S., Shi, B., Gao, W., Chen, F., and Cai, Y. (2007). “Strength and mechanical behavior of short polypropylene fiber reinforced and cement stabilised clayey soil.” Geotext. Geomembr., 25(3), 194–202.
Tang, C. S., Shi, B., Liu, C., Zhao, L., and Wang, B. (2008). “Influencing factors of geometrical structure of surface shrinkage cracks in clayey soils.” Eng. Geol., 101(3–4), 204–217.
Tang, C. S., Shi, B., and Zhao, L. Z. (2010c). “Interfacial shear strength of fiber reinforced soil.” Geotext. Geomembr., 28(1), 54–62.
Tang, G. X., and Graham, J. (2000). “A method for testing tensile strength in unsaturated soils.” Geotech. Testing J., 23(3), 377–381.
Towner, G. D. (1987). “The mechanics of cracking of drying clay.” J. Agric. Eng. Res., 36(2), 115–124.
Trabelsi, H., Jamei, M., Guiras, H., Zenzri, H., Romero, E., and Olivella, S. (2010). “Some investigations about the tensile strength and the desiccation process of unsaturated clay.” Proc., EPJ Web of Conf. 6, 12005. ICEM 14–14th Int. Conf. on Experimental Mechanics.
Viswanadham, B. V. S., Jha, B. K., and Pawar, S. N. (2010). “Experimental study on flexural testing of compacted soil beams.” J. Mater. Civ. Eng., 460–468.
Vizcarra, G. O. C., Casagrande, M. D. T., and Motta, L. M. G. (2014). “Applicability of municipal solid waste incineration ash on base layers of pavements.” J. Mater. Civ. Eng., 06014005-1-06014005-7.
Vogel, H. J., Hoffmann, H., and Roth, K. (2005). “Studies of crack dynamics in clay soil: I. Experimental methods, results, and morphological quantification.” Geoderma, 125(3–4), 203–211.
Wang, J. J., Zhu, J. G., Chiu, C. F., and Zhang, H. (2007). “Experimental study on fracture toughness and tensile strength of a clay.” Eng. Geol., 94(1–2), 65–75.
Yetimoglu, T., Inanir, M., and Inanir, O. E. (2005). “A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clay.” Geotext. Geomembr., 23(2), 174–183.
Yetimoglu, T., and Salbas, O. (2003). “A study on shear strength of sands reinforced with randomly distributed discrete fibers.” Geotext. Geomembr., 21(2), 103–110.
Zeh, R. M., and Witt, K. J. (2005). “Tensile strength of compacted clays as a criterion of crack initiation in clay liners of landfills.” Proc., Int. Conf. on Problematic Soils, Eastern Mediterranean Univ., Famagusta, Northern Cyprus.
Zeh, R. M., and Witt, K. J. (2007). “The tensile strength of compacted clays as affected by suction and soil structure.” Exp. Unsaturated Soil Mech., 112(3), 219–226.
Zhu, H. H., Zhang, C. C., Tang, C. S., Shi, B., and Wang, B. J. (2014). “Modeling the pullout behavior of short fiber in reinforced soil.” Geotext. Geomembr., 42(4), 329–338.
Ziegler, S., Leshchinsky, D., and Ling, H. L. (1998). “Effect of short polymeric fibers on crack development in clays.” Soils Found., 38(1), 247–253.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 28 • Issue 7 • July 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 18, 2014
Accepted: Nov 23, 2015
Published online: Jan 28, 2016
Discussion open until: Jun 28, 2016
Published in print: Jul 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.