Performance of Multiaxial Paving Interlayer–Reinforced Asphalt Pavement
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 7
Abstract
Paving interlayers have been used in asphalt concrete (AC) overlays for a variety of benefits. An earlier study showed that different paving interlayers improved mixture performance, while the multiaxial interlayer provided the best overall laboratory performance. This paper presents further investigation of the reinforcing effect of the multiaxial interlayer on the entire pavement. Pavement structural analysis using finite-element method (FEM) analysis and several specialized commercially available software were conducted, and field test sections were established and surveyed to further validate findings from the previous study. The pavement structural analyses were in agreement that using interlayer could improve fatigue crack resistance and extend service life. The three-yarn biaxial interlayer showed the best reinforcement potential of fatigue crack resistance, followed by the multiaxial interlayer and the two-yarn biaxial interlayer. The FEM analysis indicated that the multiaxial interlayer could improve stress distribution more effectively than the two-yarn biaxial interlayer. Preliminary results from field evaluations of test sections showed that pavement performance was improved if reinforced by interlayers, in terms of reduced amount and severity of cracking. Further monitoring of field test sections are recommended to give clearer projection of the utility of the paving interlayers in cold regions.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2009). “Determining dynamic modulus of hot mix asphalt (HMA).” AASHTO TP62, Washington, DC.
ABAQUS 6.12 [Computer software]. Dassault Systèmes Simulia, Providence, RI.
Alaska Flexible Pavement Design (AKFPD) 2003 [Computer software]. Alaska Dept. of Transportation & Public Facilities, Juneau, AK.
ARA (Applied Research Associates, Inc.). (2000). “Guide for mechanistic—empirical design of new and rehabilitated pavement structures. Appendix DD–1: Resilient modulus as function of soil moisture—Summary of predictive models.”, Transportation Research Board, Washington, DC.
Baek, J. (2010). “Modeling reflective cracking development in hot-mix asphalt overlays and quantification of control techniques.” Ph.D. dissertation, Univ. of Illinois at Urbana-Champaign, Urbana, IL.
Baek, J., and Al-Qadi, I. L. (2009). “Reflective cracking: Modeling fracture behavior of hot-mix asphalt overlay with interlayer system.” J. Assoc. Asphalt Paving Technol., 78, 789–828.
Bhutta, S. A. (1998). “Mechanistic-empirical pavement design procedure for geosynthetically stabilized flexible pavements.” Ph.D. dissertation, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.
Bitumen Stress Analysis in Roads (BISAR) 3.0 [Computer software]. Shell International Oil Products B.V., The Hague, South Holland, Netherlands.
Burton, M., Smit, A., Trevino, M., Prozzi, J., and Murphy, M. (2013). “Best practices for flexible pavement structure widening: Workshops.” Center for Transportation Research, Univ. of Texas, Austin, TX.
Button, J. W. (1989). “Overlay construction and performance using geotextiles.” Transp. Res. Rec., 1248, 24–33.
Chang, D. T., Ho, N., Chang, H., and Yeh, H. (1999). “Laboratory and case study for geogrid-reinforced flexible pavement overlay.” Transp. Res. Rec., 1687, 125–130.
Chowdhury, A., Button, J. W., and Lytton, R. L. (2009). “Tests of HMA overlays using geosynthetics to reduce reflection cracking.”, Texas Transportation Institute, Texas A&M Univ. System, College Station, TX.
Erickson, H., and Drescher, A. (2001). “The use of geosynthetics to reinforce low volume roads.”, Univ. of Minnesota, Minneapolis.
Hall, K. T., Correa, C. E., and Simpson, A. L. (2002). “LTPP data analysis—Effectiveness of maintenance and rehabilitation options.” Transportation Research Board of the National Academies, Washington, DC.
Khodaii, A., and Fallah, S. (2008). “The effect of geogrid on reduction of reflection cracking in asphalt overlay.” 4th National Conf. on Civil Engineering, Univ. of Tehran, Tehran, Iran.
Kim, H., Arraigada, M., Raab, C., and Partl, M. N. (2010). “Numerical and experimental analysis for the interlayer behavior of double-layered asphalt pavement specimens.” J. Mater. Civ. Eng., 12–20.
Kim, J., and Buttlar, W. G. (2002). “Analysis of reflective crack control system involving reinforcing grid over base-isolating interlayer mixture.” J. Transp. Eng., 375–384.
Kwon, J., Tutumluer, E., and Kim, M. (2005). “Development of a mechanistic model for geosynthetic-reinforced flexible pavements.” Geosynthetics Int., 12(6), 310–320.
Li, P., Liu, J., Samueloff, M., and Jones, D. (2014). “Performance of paving fabric reinforced asphalt mixture.” Climatic Effects on Pavement and Geotechnical Infrastructure, ASCE, Reston, VA, 126–138.
Miller, J. S., and Bellinger, W. Y. (2003). “Distress identification manual for the long-term pavement performance program.”, Federal Highway Administration, McLean, VA.
Saraf, C. L., Majidzadeh, K., and Tribbett, W. O. (1996). “Effect of reinforcement on fatigue life of asphalt beams.” Transp. Res. Rec., 1534, 66–71.
Sun, Y., Zhai, X., and Yu, B. (2012). “Finite element analysis of geosynthetics retarding damage of AC trabecula.” Proc., 2012 2nd Int. Conf. on Electric Technology and Civil Engineering, IEEE Computer Society, 1375–1378.
Van Hulst, R., and Van Gurp, C. (1988). “Structural behavior of six asphalt structures in the hextrack load set-up.”, Delft Univ. of Technology, Delft, Netherlands.
Wathugala, G. W., Huang, B., and Pal, S. (1996). “Numerical simulation of geosynthetic-reinforced flexible pavements.” Transp. Res. Rec., 1534, 58–65.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 21, 2014
Accepted: Nov 18, 2015
Published online: Feb 8, 2016
Published in print: Jul 1, 2016
Discussion open until: Jul 8, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.