Experimental Study of the Application of Polyurethane Products in Accelerated Construction of Innovative Noise Barrier
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 7
Abstract
This paper presents a comprehensive experimental study on mechanical characteristics of rigid polyurethane foam (RPF) and its application as the structural core of an innovative noise barrier consisting of polyblock, RPF, and polyurea. The mechanical behavior of RPF was characterized by performing tensile, compression, modulus of elasticity, Poisson’s ratio, flexural, shear, pullout, cyclic, and long-term creep tests. Five full-scale walls were also fabricated and their behavior was established under lateral static and cyclic loading. Applicability of the proposed wall system (polywall) in accelerated construction was practically examined. Experimental results were discussed and a preliminary design of polywall was also conducted. Results revealed that mechanical performance of RPF as well as the entire wall system is satisfactory for the investigated application and polywall can be employed in accelerated construction of noise barriers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank POLY-MOR Canada Inc. for supplying all required materials and technology for this research, their assistance to build the specimens as well as their financial support. The authors also appreciate the financial support of Natural Sciences and Engineering Research Council (NSERC) of Canada.
References
AASHTO. (2004). “AASHTO LRFD bridge design specifications.” Washington, DC.
Agavriloaie, L., Oprea, S., Barbuta, M., and Luca, F. (2012). “Characterisation of polymer concrete with epoxy polyurethane acryl matrix.” Constr. Build. Mater., 37, 190–196.
ASTM. (2008). “Standard test method for tensile properties of polymer matrix composite materials.” ASTM D3039/D3039M-08, West Conshohocken, PA.
ASTM. (2010a). “Standard test method for abrasion resistance of organic coatings by the Taber abraser.” ASTM D4060-10, West Conshohocken, PA.
ASTM. (2010b). “Standard test method for flexural strength of concrete (using simple beam with third-point loading).” ASTM C78/C78M-10, West Conshohocken, PA.
ASTM. (2010c). “Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression.” ASTM C469/C469M-10, West Conshohocken, PA.
ASTM. (2012). “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM C39/C39M-12, West Conshohocken, PA.
Bažant, Z. P., and Pfeiffer, P. A. (1986). “Shear fracture tests of concrete.” Mater. Struct., 19(2), 111–121.
Behjat, Y., Cheng, J., Polak, M., and Penlidis, A. (2014). “Effect of molecular structure on short-term and long-term mechanical behaviour of high density polyethylene.” J. Mater. Civ. Eng., 795–802.
Briodya, C., Duignana, B., Jerramsb, S., and Ronanb, S. (2012). “Prediction of compressive creep behaviour in flexible polyurethane foam over long time scales and at elevated temperatures.” Polym. Test., 31(8), 1019–1025.
Chen, W., Lu, F., and Winfree, N. (2002). “High-strain-rate compressive behavior of a rigid polyurethane foam with various densities.” Exp. Mech., 42(1), 65–73.
Choi, H., Toutanji, H., Gilbert, J., and Alldredge, D. (2013). “Impact resistance of polyurea-coated high performance cementitious composites.” J. Mater. Civ. Eng., 1984–1989.
CSA. (2003). “Standard for certification of noise barrier.” CAN/CSA-Z107.9-00, Mississauga, ON, Canada.
CSA. (2004). “Design of concrete structures.” CAN/CSA-A23.3-04, Rexdale, ON, Canada.
CSA. (2006). “Canadian highway bridge design code.” CAN/CSA-S6-06, Mississauga, ON, Canada.
CSA. (2009). “Carbon steel bars for concrete reinforcement.” CAN/CSA-G30.18-09, Mississauga, ON, Canada.
Daee, B. (2015). “Application of polyurethane products in accelerated construction of innovative noise barrier.” Ph.D. thesis, Univ. of Western Ontario, London, ON, Canada.
Decker, C., Masson, F., and Schwalm, R. (2004). “Weathering resistance of waterbased UV-cured polyurethane-acrylate coatings.” Polym. Degrad. Stab., 83(2), 309–320.
Fang, Z. H., et al. (2011). “Novel heat-resistance UV curable waterborne polyurethane coatings modified by melamine.” Appl. Surf. Sci., 257(11), 4765–4768.
FHWA (Federal Highway Administration). (2011). “Highway traffic noise: Analysis and abatement guidance.” FHWA-HEP-10-025, Washington, DC.
Greene, C., and Myers, J. (2013). “Flexural and shear behavior of reinforced concrete members strengthened with a discrete fiber-reinforced polyurea system.” J. Compos. Constr., 108–116.
Huang, J. S., and Gibson, L. J. (1991). “Creep of polymer foams.” J. Mater. Sci., 26(3), 637–647.
Irshidat, M., Al-Ostaz, A., Cheng, A., and Mullen, C. (2011). “Blast vulnerability evaluation of concrete masonry unit infill walls retrofitted with nano particle reinforced polyurea: Modelling and parametric evaluation.” Struct. Congr., 2126–2141.
Khanlou, A., MacRae, G. A., Scott, A. N., Hicksand, S. J., and Clifton, G. C. (2012). “Shear performance of steel fibre-reinforced concrete.” Australasian Structural Engineering Conf., Perth, Australia, 8.
Li, Y., Kim, U. S., Shields, J., and Davis, R. (2013). “Controlling polyurethane foam flammability and mechanical behaviour by tailoring the composition of clay-based multilayer nanocoatings.” J. Mater. Chem. A, 1(41), 12987–12997.
Liu, P. (2000). “Is the wind wave frequency spectrum outdated.” Ocean Eng., 27(5), 577–588.
Majdzadeh, F., Soleimani, S. M., and Banthia, N. (2011). “Shear strength of reinforced concrete beams with a fiber concrete matrix.” Can. J. Civ. Eng., 33(6), 726–734.
Manalo, A. (2013). “Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and magnesium oxide board.” Constr. Build. Mater., 41, 642–653.
NBCC. (2005). “National building code of Canada.” National Research Council of Canada (NRCC), Ottawa.
Priddy, L. P., and Newman, J. K. (2010). “Full-scale field testing for verification of mechanical properties of polyurethane foams for use as backfill in PCC repairs.” J. Mater. Civ. Eng., 245–252.
Qoods, S. H., Neuschwanger, C. L., and Whinnery, L. L. (1998). “Mechanical properties of a structural polyurethane foam and the effect of particulate loading.” Porous and cellular materials for structural applications, Materials Research Society, San Francisco.
Ramamurthy, K., Kunhanandan Nambiar, E. K., and Indu Siva Ranjani, G. (2009). “A classification of studies on properties of foam concrete.” Cem. Concr. Compos., 31, 388–396.
Ridha, M. (2007). “Mechanical and failure properties of rigid polyurethane foam under tension.” Ph.D. thesis, National Univ. of Singapore, Singapore.
Rizzi, E., Papa, E., and Coriglian, A. (2000). “Mechanical behavior of a syntactic foam: Experiments and modeling.” Int. J. Solids Struct., 37(40), 5773–5794.
Ruiz, D., Riveros, M., León, M., Vacca, H., and Jarro, S. (2014). “Cyclic and static tests to evaluate the seismic strength of walls and connections of prefab light weight panels for housing construction projects.” Pract. Period. Struct. Des. Constr., 04014004.
Sharaf, T., and Fam, A. (2011). “Experimental investigation of large-scale cladding sandwich panels under out-of-plane transverse loading for building applications.” J. Compos. Constr., 422–430.
Sound Attenuation Certification. (2008). “Acoustical consulting service.” AB, Canada.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jul 27, 2015
Accepted: Nov 2, 2015
Published online: Jan 27, 2016
Discussion open until: Jun 27, 2016
Published in print: Jul 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.