Analytical Model for Square Root Increase of Surface Chloride Concentration and Decrease of Chloride Diffusivity
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 4
Abstract
An analytical model of chloride diffusion in concrete structures is derived mathematically for a condition with a square-root increase of surface chloride concentration and a decrease of chloride diffusivity in the initial exposure period. This model is validated with four sets of chloride profiles measured by other researchers on concrete samples containing a few types of cementitious materials. The validation results indicate that the new model is accurate and suitable for the abovementioned diffusion condition with the average coefficient of determination () between the modeled results and the measured chloride profiles being very close to 1 (i.e., ). The model can be used to predict the chloride concentration profile after undergoing diffusion for a certain period in the initial exposure period, which can then be integrated with the profile outcomes modeled for the subsequent exposure periods with different diffusion conditions to determine the corrosion initiation period as a main part of concrete structure’s service life.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Thanks are given to Zhou’s Concrete Consulting Pty, Ltd. for sponsoring this research.
References
ACI (American Concrete Institute). (2000). “Service life prediction—State-of-the-art report.” ACI 365.1R-00, Farmington Hills, MI.
Ann, K. Y., Ahn, J. H., and Ryou, J. R. (2009). “The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures.” Constr. Build. Mater., 23(1), 239–245.
Bamforth, P. (2004). “Enhancing reinforced concrete durability.”, Concrete Society, Surrey, U.K.
Bamforth, P. B., Price, W. F., and Emerson, M. (1997). “An international review of chloride ingress into structural concrete.” Transport Research Laboratory (TRL), Berkshire, U.K.
Collepardi, M., Marcialis, A., and Turriziani, R. (1972). “Penetration of chloride ions into cement pastes and concrete.” J. Am. Ceram. Soc., 55(10), 534–535.
Collins, F. G., and Grace, W. R. (1997). “Specifications and testing for corrosion durability of marine concrete: The Australian perspective.” Durability of concrete, V. M. Malhotra, ed., American Concrete Institute, Farmington Hills, MI, 757–776.
Costa, A., and Appleton, J. (1999). “Chloride penetration into concrete in marine environment—Part 1: Main parameters affecting chloride penetration.” Mater. Struct., 32(4), 252–259.
Crank, J. (1975). The mathematics of diffusion, Clarendon Press, Oxford, U.K.
DuraCrete. (1998). “Modelling of degradation–probabilistic performance-based durability design of concrete structures.”, Lyngby, Denmark, 174.
fib (Federation of International Beton). (2006). “Bulletin 34—Model code for service life design.” Lausanne, Switzerland.
Fick, A. (1855). “On liquid diffusion.” Philosophy Mag., 10(4), 30–39.
Lee, N. P., and Chisholm, D. H. (2005). “Durability of reinforced concrete structures under marine exposure in New Zealand.”, BRANZ, Judgeford, New Zealand.
Magdalena, B., Lothenbach, B., Saout, G. L., and Glasser, F. P. (2010). “Impact of chloride on the mineralogy of hydrated portland cement systems.” Cem. Concr. Res., 40(7), 1009–1022.
Mangat, P. E., and Molloy, B. T. (1994). “Prediction of long term chloride concentration in concrete.” Mater. Struct., 27(6), 338–346.
Meira, G. R., Andrade, C., Alonso, C., Borb, J. C., and Padilha, M. (2010). “Durability of concrete structures in marine atmosphere zones—The use of chloride deposition rate on the wet candle as an environmental indicator.” Cem. Concr. Compos., 32(6), 427–435.
Mustafa, M. A., and Yusof, K. M. (1994). “Atmospheric chloride penetration into concrete in semi-tropical marine environment.” Cem. Concr. Res., 24(4), 661–670.
Nielsen, E. P., Herfort, D., and Geiker, M. R. (2005). “Binding of chloride and alkalis in portland cement systems.” Cem. Concr. Res., 35(1), 117–123.
NordTest. (1995). “Concrete, hardened–accelerated chloride penetration.”, Espoo, Finland.
Stanish, K., and Thomas, M. (2003). “The use of bulk diffusion tests to establish time-dependent concrete chloride diffusion coefficients.” Cem. Concr. Res., 33(1), 55–62.
Swamy, R. N., Hamada, H., and Laiw, J. C. (1994). “A critical evaluation of chloride penetration into concrete in marine environment.” Proc., Int. Conf. on Corrosion and Corrosion Protection of Steel in Concrete, Vol. 1, Univ. of Shefield, England, 404–414.
Tang, L. (2001). “ClinConc model for prediction of chloride penetration into concrete—From the original to the latest modifications.” Prediction models for chloride ingress and corrosion initiation in concrete structures, L. Nillson ed., Chalmers Univ. of Technology, Goteborge, Sweden.
Tang, L. (2003). “Chloride ingress in concrete exposed to marine environment—Field data up to 10 years exposure.” Swedish National Testing and Research Institute, Borås, Sweden.
Tang, L., and Gulikers, J. (2007). “On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete.” Cem. Concr. Res., 37(4), 589–595.
Webster, M. P. (2000). “The assessment of corrosion-damaged concrete structures.” Ph.D. thesis, Univ. of Birmingham, Birmingham, U.K.
Zhou, S. (2014). “Modeling chloride diffusion in concrete with linear increase of surface chloride.” ACI Mater. J., 111(5), 483–490.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jun 10, 2015
Accepted: Sep 9, 2015
Published online: Oct 30, 2015
Discussion open until: Mar 30, 2016
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.