Effect of Molecular Weight of Polycarboxylate Superplasticizer on Its Dispersion, Adsorption, and Hydration of a Cementitious System
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 5
Abstract
The aim of this study was to link the molecular weight (MW) of polycarboxylate superplasticizer (PCE) with the performance of cementitious system for the purpose of developing new products; PCE synthesized by copolymerization of methacrylic acid and methyl poly(ethylene oxide) methacrylate was characterized by proton nuclear magnetic resonance () and gel permeation chromatography (GPC). The polycarboylate (PC) was separated into four fractions with different MWs using an ultrafiltration method. The interaction behaviors between PC fractions and cement particles were investigated by measuring the adsorption, zeta potential, and hydration. Results showed that PC fractions with medium MW showed a good dispersion and dispersion retention owing to the adsorption amount continuously increasing with time and delayed the longest cement hydration time. The highest MW of PC exhibited poor dispersion and dispersion retention, having the greatest adsorption amount on the cement surface and poor adsorption capacity in the later period, and carried out to promote hydration of cement compared with other polymers. It can be deduced that there was an ideal MW for the best different performance of the PC investigated. This can provide an important reference for optimizing the process parameters in the preparation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financial supports of the Natural Science Fund for Distinguished Youth Scholars of Jiangsu Province (BK20130048), National Natural Science Foundation of China (51408272, 1272100), and Key Projects of science and technology research of China Railway Corporation (2014G001-C).
References
Aiad, I., and Hafiz, A. (2003). “Structural effect of prepared and commercial superplasticizers on performance of cement pastes.” J. Appl. Polym. Sci., 90(2), 482–487.
Bahri, E., Sedef, D., and Tayfun, U. (2013). “Effect of mixing water types on the time dependent zeta potential of portland cement paste.” Sci. Eng. Compos. Mater., 20(3), 285–292.
Bullard, J. W., et al. (2011). “Mechanisms of cement hydration.” Cem. Concr. Res., 41(12), 1208–1223.
Eisa, E. H., and Essam, A. K. (1999). “Effect of sodium salt of naphthalene formaldehyde polycondensate on ettringite formation.” Cem. Concr. Res., 29(10), 1535–1540.
Ferrari, L., Kaufmann, J., Winnefeld, F., and Plank, J. (2014). “Impact of particle size on interaction forces between ettringite and dispersing comb-polymers in various electrolyte solutions.” J. Colloid Interface Sci., 419, 17–24.
Hamada, D., Sato, H., Yamauro, H., Izumi, T., and Mizunuma, T. (2003). “Development of slump-loss controlling agent with minimal setting retardation.” Proc., 7th CANMET/ACI Int. Conf. Superplasticizers and Other Chemical Admixtures in Concrete, ACI, Berlin, 128.
Kilinckale, F., and Dogan, G. (2007). “Performance of concretes produced with superplasticizer.” J. Appl. Polym. Sci., 103(5), 3214–3219.
Li, Z. L., Pang, Y. X., Ge, Y. Y., and Qiu, X. Q. (2012). “Adsorption of different molecular weight lignosulfonates on dimethomorph powder in an aqueous system.” J. Ind. Eng. Chem., 18(1), 532–537.
Lou, H. M., Ji, K. B., Lin, H. K., Pang, Y. X., Deng, Y. H., and Qiu, X. Q. (2012). “Effect of molecular weight of sulphonated acetone-formaldehyde condensate on its adsorption and dispersion properties in cementitious system.” Cem. Concr. Res., 42(8), 1043–1048.
Magarotto, R., Torresan, I., and Zeminian, N. (2003). “Influence of the molecular weight of polycarboxylate ether superplasticizers on the rheological properties of fresh cement pastes, mortar and concrete.” Proc., 11th Int. Congress on the Chemistry of Cement (ICCC), South Africa Cement and Concrete Institute, Durban, 514–526.
Mollah, M. Y. A., Adams, W. J., Schennach, R., and Cocke, D. L. (2000). “A review of cement-superplasticizer interactions and their models.” Adv. Cem. Res., 12(4), 153–161.
Ouyang, X. P., Jiang, X. Y., Qiu, X. Q., Yang, D. J., and Pang, Y. X. (2009). “Effect of molecular weight of sulfanilic acid-phenol-formaldehyde condensate on the properties of cementitious system.” Cem. Concr. Res., 39(4), 283–288.
Peng, X. Y., Yi, C. H., Qiu, X. Q., and Deng, Y. H. (2012). “Effect of molecular weight of polycarboxylate-type superplasticizer on the rheological properties of cement pastes.” Polym. Polym. Compos., 20(8), 725–736.
Plank, J., and Hirsch, Ch. (2007). “Impact of zeta potential of early cement hydration phases on superplasticizer adsorption.” Cem. Concr. Res., 37(4), 537–542.
Plank, J., Vlad, D., and Brandl, A. (2005). “Colloidal chemistry examination of the steric effect of polycarboxylate superplasticizers.” Cem. Int., 3, 101–110.
Popova, A., and Ghita, G. (2000). “Interactions between polymeric dispersants and calcium silicate hydrates.” J. Am. Ceram. Soc., 83(10), 2556–2560.
Prince, W., and Espane, M. (2003). “Ettringite formation: A crucial step in cement superplasticizer compatibility.” Cem. Concr. Res., 33(5), 635–641.
Quennoz, A., and Scrivener, K. L. (2012). “Hydration of C3A-gypsum systems.” Cem. Concr. Res., 42(7), 1032–1041.
Quennoz, A., and Scrivener, K. L. (2013). “Interactions between alite and C3A-gypsum hydrations in model cements.” Cem. Concr. Res., 44, 46–54.
Vos, S. C., and Moller, M. (1993). “Polyacrylamide-graft-poly(ethylene oxide).” Macromol. Symp., 75(1), 223–229.
Winnefeld, F., Becker, S., Pakusch, J., and Gotz, T. (2007). “Effects of the molecular architecture of comb-shaped superplasticizers on their performance in cementitious systems.” Cem. Concr. Compos., 29, 251–262.
Yamada, K., Ogama, S., and Hanehara, S. (2001). “Controlling of the adsorption and dispersing force of polycarboxylate-type superplasticizer by sulfate ion concentration in aqueous phase.” Cem. Concr. Res., 31(3), 375–383.
Yamada, K., Takahashi, T., and Hanehara, S. (2000). “Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer.” Cem. Concr. Res., 30(2), 197–207.
Yoshioka, K., Tazawa, E., Kawai, K., and Enohata, T. (2002). “Adsorption characteristics of superplasticizers on cement component minerals.” Cem. Concr. Res., 32(10), 1507–1513.
Zhang, Y. R., and Kong, X. M. (2015). “Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes.” Cem. Concr. Res., 69, 1–9.
Zingg, A., Winnefeld, F., Holzer, L., Pakusch, J., Becker, S., and Gauckler, L. (2008). “Adsorption of polyelectrolytes and its influence on the rheology, zeta potential, and microstructure of various cement and hydrate phases.” J. Colloid Interface Sci., 323(2), 301–312.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 1, 2015
Accepted: Aug 20, 2015
Published online: Nov 4, 2015
Discussion open until: Apr 4, 2016
Published in print: May 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.