Experimental Investigation Concrete Using Magnesium Phosphate Cement, Fly Ash, and Rape Stalk
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 4
Abstract
This paper presents an investigation on a new material composed of magnesium phosphate cement (MPC), fly ash, and rape stalk. The main goal is to evaluate the viability of using this new material as an insulation material for buildings. Several composites with different weight concentrations and three different rape stalk sizes were prepared. The density, compressive strength, and thermal conductivity of the material were measured. Experimental results show that the proposed MPC rape stalk concrete possesses required material properties for production of lightweight concrete in structural and non-structural applications. The physical properties of the rape stalk indicate that it is a promising alternative to hemp hurd for producing plant concrete. Results also indicate that MPC might be a better cementitious material for producing plant aggregate concrete compared with portland cement or lime.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financial support by National Natural Science Foundation of China (No. 51378309)
References
Agopyan, V., Savastano, H., Jr., John, V., and Cincotto, M. (2005). “Developments on vegetable fibre-cement based materials in São Paulo, Brazil: An overview.” Cem. Concr. Compos., 27(5), 527–536.
Arnaud, L., and Gourlay, E. (2012). “Experimental study of parameters influencing mechanical properties of hemp concretes.” Constr. Build. Mater., 28(1), 50–56.
Balendran, R., Zhou, F., Nadeem, A., and Leung, A. (2002). “Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete.” Build. Environ., 37(12), 1361–1367.
Baley, C., Busnel, F., Grohens, Y., and Sire, O. (2006). “Influence of chemical treatments on surface properties and adhesion of flax fibre-polyester resin.” Composites Part A, 37(10), 1626–1637.
Benmansour, N., Agoudjil, B., Gherabli, A., Kareche, A., and Boudenne, A. (2014). “Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building.” Energy Build., 81(10), 98–104.
Bouvard, D., et al. (2007). “Characterization and simulation of microstructure and properties of EPS lightweight concrete.” Cem. Concr. Res., 37(12), 1666–1673.
Campione, G., Miraglia, N., and Papia, M. (2001). “Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates.” Mater. Struct., 34(4), 201–210.
Coutts, R. S. (2005). “A review of Australian research into natural fibre cement composites.” Cem. Concr. Compos., 27(5), 518–526.
de Bruijn, P. B., Jeppsson, K. H., Sandin, K., and Nilsson, C. (2009). “Mechanical properties of lime-hemp concrete containing shives and fibres.” Biosyst. Eng., 103(4), 474–479.
Ding, Z., and Li, Z. (2005). “Effect of aggregates and water contents on the properties of magnesium phospho-silicate cement.” Cem. Concr. Compos., 27(1), 11–18.
Domagała, L. (2011). “Modification of properties of structural lightweight concrete with steel fibres.” J. Civ. Eng. Manage., 17(1), 36–44.
Elfordy, S., Lucas, F., Tancret, F., Scudeller, Y., and Goudet, L. (2008). “Mechanical and thermal properties of lime and hemp concrete (“hempcrete”) manufactured by a projection process.” Constr. Build. Mater., 22(10), 2116–2123.
El Hajj, N., Dheilly, R., Goullieux, A., Aboura, Z., Benzeggagh, M., and Quéneudec, M. (2012). “Innovant agromaterials formulated with flax shaves and proteinic binder: Process and characterization.” Composites Part B, 43(2), 381–390.
Ghavami, K., Toledo Filho, R. D., and Barbosa, N. P. (1999). “Behaviour of composite soil reinforced with natural fibres.” Cem. Concr. Compos., 21(1), 39–48.
Khedari, J., Suttisonk, B., Pratinthong, N., and Hirunlabh, J. (2001). “New lightweight composite construction materials with low thermal conductivity.” Cem. Concr. Compos., 23(1), 65–70.
Li, Y., and Chen, B. (2013). “Factors that affect the properties of magnesium phosphate cement.” Constr. Build. Mater., 47(10), 977–983.
Li, Y., Mai, Y. W., and Ye, L. (2000). “Sisal fibre and its composites: A review of recent developments.” Compos. Sci. Technol., 60(11), 2037–2055.
Madurwar, M. V., Ralegaonkar, R. V., and Mandavgane, S. A. (2013). “Application of agro-waste for sustainable construction materials: A review.” Constr. Build. Mater., 38(1), 872–878.
Nguyen, T. T., Picandet, V., Amziane, S., and Baley, C. (2009). “Influence of compactness and hemp hurd characteristics on the mechanical properties of lime and hemp concrete.” Eur. J. Environ. Civ. Eng., 13(9), 1039–1050.
Nozahic, V., and Amziane, S. (2012). “Influence of sunflower aggregates surface treatments on physical properties and adhesion with a mineral binder.” Composites Part A, 43(11), 1837–1849.
Nozahic, V., Amziane, S., Torrent, G., Saïdi, K., and De Baynast, H. (2012). “Design of green concrete made of plant-derived aggregates and a pumice-lime binder.” Cem. Concr. Compos., 34(2), 231–241.
Park, H. M., Lee, W. K., Park, C. Y., Cho, W. J., and Ha, C. S. (2003). “Environmentally friendly polymer hybrids. Part I: Mechanical, thermal, and barrier properties of thermoplastic starch/clay nanocomposites.” J. Mater. Sci., 38(5), 909–915.
Pinto, J., et al. (2012). “Corn cob lightweight concrete for non-structural applications.” Constr. Build. Mater., 34(11), 346–351.
Ramamurthy, K., Kunhanandan Nambiar, E. K., and Indu Siva Ranjani, G. (2009). “A classification of studies on properties of foam concrete.” Cem. Concr. Compos., 31(6), 388–396.
Rilem, L. (1978). “Functional classification of lightweight concrete.” Mater. Struct., 11, 281–283.
Rossignolo, J. A., Agnesini, M. V., and Morais, J. A. (2003). “Properties of high-performance LWAC for precast structures with Brazilian lightweight aggregates.” Cem. Concr. Compos., 25(1), 77–82.
Sedan, D., Pagnoux, C., Smith, A., and Chotard, T. (2008). “Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction.” J. Eur. Ceram. Soc., 28(1), 183–192.
Shea, A., Lawrence, M., and Walker, P. (2012). “Hygrothermal performance of an experimental hemp-lime building.” Constr. Build. Mater., 36(11), 270–275.
Sudin, R., and Swamy, N. (2006). “Bamboo and wood fibre cement composites for sustainable infrastructure regeneration.” J. Mater. Sci., 41(21), 6917–6924.
Toledo Filho, R. D., Ghavami, K., England, G. L., and Scrivener, K. (2003). “Development of vegetable fibre-mortar composites of improved durability.” Cem. Concr. Compos., 25(2), 185–196.
Yin, Z., Pan, Z., Wang, C., Dong, Y., and Ou, Y. (2007). “Composition, structure and mechanical properties of several natural cellular materials.” Chin. Sci. Bull., 52(21), 2903–2908.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Aug 19, 2014
Accepted: Aug 20, 2015
Published online: Oct 8, 2015
Discussion open until: Mar 8, 2016
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.