3D Numerical Investigation of Cement Mortar with Microscopic Defects at High Strain Rates
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 3
Abstract
This paper develops a three-dimensional (3D) microscopic model to investigate the mechanical response of cement mortar with random defects at high strain rates. Ellipsoids with randomness in size, shape, and spatial distribution are used to simulate the defects in mortar matrix. First, we propose the steps to generate the ellipsoid. Second, a “take and place” algorithm is employed to generate a model of cement mortar composed of defects. The mapping algorithm is used to generate a finite-element grid. In finite-element modeling, the material model is used in an advanced general-purpose multiphysics simulation software package to simulate the nonlinear behavior of mortar matrix with strain rate effects. Numerical simulations of the specimen under static loadings agree well with test observations, which reveal that the proposed 3D microscopic model and finite-element analytical approach can give reliable predictions. Finally, numerical studies are conducted, focusing on the effect of the defects on the dynamic responses of cement mortar. It is demonstrated that the defects have effects both on the dynamic behavior and failure pattern under high strain rate loading.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by the National Natural Science Foundation of China (51321064, 51478464, 51208509) and by the Program for New Century Excellent Talents in University (NCET-12-1008). We thank Mr. Zhiyuan Sun in the preparation and discussion of modeling.
References
ABAQUS [Computer software]. Waltham, MA, Dassault Systèmes.
ANSYS [Computer software]. Canonsburg, PA, ANSYS.
AUTODYN [Computer software]. Canonsburg, PA, ANSYS.
Auskern, A., and Horn, W. (1973). “Capillary porosity in hardened cement paste.” J. Test. Eval., 1(1), 74–79.
Beaudoin, J. J., and Ramachandran, V. S. (1992). “A new perspective on the hydration characteristics of cement phases.” Cem. Concr. Res., 22(4), 689–694.
CEB (Committee Euro-International Du Beton). (1993). CEB-FIP Model Code 1990, Redwood Books, Trowbridge, Wiltshire, U.K.
Chen, A. C. F., and Chen, W. F. (1975). “Constitutive relations for concrete.” J. Eng. Mech. Div., 101(EM4), 465–481.
Chen, X., Wu, S., and Zhou, J. (2013). “Influence of porosity on compressive and tensile strength of cement mortar.” Constr. Build. Mater., 40, 869–874.
Chindaprasirt, P., Hatanaka, S., Chareerat, T., Mishima, N., and Yuasa, Y. (2008). “Cement paste characteristics and porous concrete properties.” Constr. Build. Mater., 22(5), 894–901.
Cnudde, V., Cnudde, J. P., Dupuis, C., and Jacobs, P. J. S. (2004). “X-ray micro-CT used for the localization of water repellents and consolidants inside natural building stones.” Mater. Charact., 53(2–4), 259–271.
Coppola, R., Lapp, A., Magnani, M., and Valli, M. (2002). “Non-destructive investigation of microporosity in marbles by means of small angle neutron scattering.” Constr. Build. Mater., 16(4), 223–227.
Das, B. B., and Kondraivendhan, B. (2012). “Implication of pore size distribution parameters on compressive strength, permeability and hydraulic diffusivity of concrete.” Constr. Build. Mater., 28(1), 382–386.
Diamond, S. (1999). “Aspects of concrete porosity revisited.” Cem. Concr. Res., 29(8), 1181–1188.
Du, X., Jin, L., and Ma, G. (2013). “Macroscopic effective mechanical properties of porous dry concrete.” Cem. Concr. Res., 44, 87–96.
Francisco, M. C., Jorge, M. M., and Fernando, M. (2014). “Mesomechanical characterization of porosity in cementitious composites by means of a voxel-based finite element model.” Comput. Mater. Sci., 90, 157–170.
Greenberger, M. (1961). “An a priori determination of serial correlation in random numbers.” Math. Comput., 15(76), 383–389.
Hoff, G. C. (1983). “Porosity-strength considerations for cellular concrete.” Cem. Concr. Res., 13(1), 127–134.
Hu, J., and Stroeven, P. (2006). “Proper characterisation of pore size distribution in cementitious materials.” Key Eng. Mater., 302–303, 479–485.
Kotsovos, M. D., and Newman, J. B. (1978). “Generalized stress-strain relations for concrete.” J. Eng. Mech., 104(4), 845–856.
Kumar, R., and Bhattacharjee, B. (2003). “Porosity, pore size distribution and in situ strength of concrete.” Cem. Concr. Res., 33(1), 155–164.
Li, L., and Aubertin, M. (2003). “A general relationship between porosity and uniaxial strength of engineering materials.” Can. J. Civ. Eng., 30(4), 644–658.
Lian, C., Zhuge, Y., and Beecham, S. (2011). “The relationship between porosity and strength for porous concrete.” Constr. Build. Mater., 25(11), 4294–4298.
LSTC (Livermore Software Technology Corporation). (2007). LS-DYNA version 971 keyword user’s manual, Livermore, CA.
Malvar, L. J., Crawford, J. E., and Morrill, K. B. (2000). “K&C concrete material model, release. III: Automated generation of material model input.”, Glendale, CA.
Malvar, L. J., Crawford, J. E., and Wesevich, J. W. (1997). “A plasticity concrete material model for Dyna3D.” Int. J. Impact Eng., 19(9–10), 847–873.
Malvar, L. J., Crawford, J. E., Wesevich, J. W., and Simons, D. (1994). “A new concrete material model for DYNA3D.”, Karagozian and Case Structural Engineers, Glendale, CA.
Malvar, L. J., Crawford, J. E., Wesevich, J. W., and Simons, D. (1996). “A new concrete material model for DYNA3D-release II: Shear dilation and directional rate enhancements.”, Karagozian and Case Structural Engineers, Glendale, CA.
Ottesen, N. S. (1977). “A failure criterion for concrete.” J. Eng. Mech. Div., 103(4), 527–535.
Patil, S. G., and Bhattacharjee, B. (2008). “Size and volume relationship of pore for construction materials.” J. Mater. Civ. Eng., 410–418.
Pauli, J., Scheying, G., Mügge, C., and Zschunke, A. (1997). “Lorenz P. Determination of the pore widths of highly porous materials with NMR microscopy.” Fresenius J. Anal. Chem., 357(5), 508–513.
Pia, G., and Sanna, U. (2013). “A geometrical fractal model for the porosity and thermal conductivity of insulating concrete.” Constr. Build. Mater., 44, 551–556.
Popovics, S. (1973). “Method for developing relationships between mechanical properties of hardened concrete.” J. Am. Concr. Inst., 70(12), 795–798.
Roy, D. M., and Gouda, G. R. (1973). “Porosity-strength relation in cementitious materials with very high strengths.” J. Am. Ceram. Soc., 56(10), 549–550.
Shi, Y., Li, Z., and Hao, H. (2010). “A new method for progressive collapse analysis of RC frames under blast loading.” Eng. Struct., 32(6), 1691–1703.
Wittmann, F. H., Roelfstra, P. E., and Sadouki, H. (1984). “Simulation and analysis of composite structures.” Mater. Sci. Eng., 68(2), 239–248.
Xu, K., and Lu, Y. (2006). “Numerical simulation study of spallation in reinforced concrete plates subjected to blast loading.” Comput. Struct., 84(5–6), 431–438.
Yu, Z., and Ye, G. (2013). “The pore structure of cement paste blended with fly ash.” Constr. Build. Mater., 45, 30–35.
Zhang, M., and Li, H. (2011). “Pore structure and chloride permeability of concrete containing nano-particles for pavement.” Constr. Build. Mater., 25(2), 608–616.
Zhao, T. (2006). Permeability of concrete, Science Press, Beijing.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Sep 10, 2014
Accepted: Jul 28, 2015
Published online: Sep 24, 2015
Discussion open until: Feb 24, 2016
Published in print: Mar 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.