Equal Arc Segment Method for Averaging Data Plots Exemplified for Averaging Stress versus Strain Curves of Pervious Concrete
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 1
Abstract
In common engineering practice, data plots, such as the stress versus strain relationship of materials, are averaged among a series of samples using the mean ordinate (MO) method. This method is reliable as long as the sample performance does not vary significantly. If the stress versus strain curve of individual samples differs significantly in terms of shape, peak stress, and corresponding strain, the MO method may result in misleading average curves that do not adequately represent the material behavior. In this paper, an equal arc segment (EAS) method for averaging data plots is presented. Based on experimentally obtained compressive stress versus strain curves for pervious concrete, a comparison has been conducted between the proposed EAS method and the MO method. The results show that the EAS method outperforms the MO method, especially where there are high variations in the data pool. The EAS method is not limited to pervious concrete as showcased here, but can be applied to other data plots as well.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research has been supported by a fellowship from the State Scholarship Fund of China, the China Scholarship Council (CSC), and the University of Connecticut. The writers would also like to acknowledge the support from the following companies: Elkem Materials and Lehigh Cement Company.
References
ACI (American Concrete Institute). (2004). “Guide for selecting proportion for no slump concrete. Manual of concrete practice.”, Farmington Hills, MI.
ASTM. (2001). “Standard test method for compressive strength of cylindrical concrete specimens.”, West Conshohocken, PA.
Deo, O., and Neithalath, N. (2010). “Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features.” Mater. Sci. Eng. A, 528(1), 402–412.
Deo, O., and Neithalath, N. (2011). “Compressive response of pervious concretes proportioned for desired porosities.” Constr. Build. Mater., 25(11), 4181–4189.
Fujiwara, H., Tomita, R., Okamoto, T., Dozono, A., and Obatake, A. (1998). “Properties of high-strength porous concrete.”, American Concrete Institute, Farmington Hills, MI, 173–188.
Ghafoori, N., and Dutta, S. (1995). “Laboratory investigation of compacted no-fine concrete for paving materials.” J. Mater. Civ. Eng., 183–191.
Lian, C., and Zhuge, Y. (2010). “Optimum mix design of enhanced permeable concrete—An experimental investigation.” Constr. Build. Mater., 24(12), 2664–2671.
MATLAB [Computer software]. Natick, MA, MathWorks.
Neville, A. M. (1995). Properties of concrete, Longman, England.
Tennis, P. D., Leming, M. L., and Akers, D. J. (2004). “Pervious concrete pavements.”, Portland Cement Association, Skokie, IL.
Wille, K., Naaman, A. E., El-Tawil, S., and Parra-Montesinos, G. J. (2011a). “Ultra-high performance concrete and fiber reinforced concrete: Achieving strength and ductility with no heat curing.” Mater. Struct., 45(3), 309–324.
Wille, K., Naaman, A. E., and Parra-Montesinos, G. J. (2011b). “Ultra high performance concrete with compressive strength exceeding 150 MPa (22 ksi): A simple way.” ACI Mater. J., 108(1), 46–54.
Wille, K., and Zhong, R. (2012). “High strength pervious concrete.” Proc., Hipermat 2012, 3rd Int. Symp. on UHPC and Nanotechnology for High Performance Construction Materials, M. Schmidt and E. Fehling, eds., Kassel University Press, Kassel, Germany, 825–832.
Yang, J., and Jiang, G. (2003). “Experimental study on properties of pervious concrete pavement materials.” Cem. Concr. Res., 33(3), 381–386.
Zhong, R. (2015). “Design, characterization and modeling of high performance pervious concrete.” Doctoral dissertation, Univ. of Connecticut, Storrs, CT.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 2, 2014
Accepted: Mar 26, 2015
Published online: May 19, 2015
Discussion open until: Oct 19, 2015
Published in print: Jan 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.