Mechanical Characterization of Lightweight Expanded Clay Aggregate Materials for Modeling Their Geotechnical Behavior
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 11
Abstract
Based on an extensive testing program, this study presents the mechanical behavior of a lightweight expanded clay aggregate (LWA). This material is currently being used in many civil engineering works and particularly in geotechnical applications due to its low weight, high shear strength, and favorable drainage characteristics. The present investigation is based on a particulate mechanics approach aimed at the quantification of appropriate model parameters in order to describe the material’s mechanical performance. The first part of the study concentrates on the determination of the physical and mechanical properties of the particles themselves. Relevant hydro-mechanical aspects of the particulate material are investigated. The second part focuses on the mechanical behavior of the aggregates. Using the compaction characteristics and stress ranges prescribed by the product manufacturer, a series of laboratory tests was performed on materials with two different grain-size distributions and water content conditions. The results obtained in the first part contributed to the determination of a phenomenological interpretation of the mechanical behavior of the aggregate. Finally, the quantification of nonlinear stiffness, internal friction angle, and its dependency on normal effective stresses and for the design of civil engineering works is presented. This research also offers relevant support for the development of constitutive models.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge Weber-Saint Gobain for providing the material and funding for this research, as well as their permission to publish the results.
References
Alonso, A. A., and Oldecop, L. A. (2001). “Modelling the behaviour of rockfill.” Proc., 10th Int. Conf. on Computer Methods and Advances in Geomechanics, D. Contractor, C. Desai, S. Harpalani, J. Kemeny, and T. Kundu, eds., A.A. Balkema, Netherlands, 3–11.
Bernhardt, M., Tellesbø, H., Justnes, H., and Wiik, K. (2013). “Mechanical properties of lightweight aggregates.” J. Eur. Ceram. Soc., 33(13–14), 2731–2743.
Bolton, M. D. (1999). “The role of micro-mechanics in soil mechanics.” Int. Workshop on Soil Crushability, Yamaguchi Univ., Japan.
Bolton, M. D., and McDowell, G. R. (1996). “Clastic mechanics.” IUTAM Symp. on Mechanics of Granular and Porous Materials, Kluver, Dordrecht, Netherlands.
Caldeira, L., Cardoso, R., and Maranha das Neves, E. (2010). “Structural behaviour of expanded clay embankments (LECA).” 12° Congresso Nacional de Geotecnia, Sociedade Portuguesa de Geotecnia, Lisboa, Portugal (in Portuguese).
Caldeira, L., and Maranha das Neves, E. (2009). “Study of the sensitivity of the mechanical characteristics of light weight aggregates (LWA) to changes in relative humidity conditions.” LNEC/IST, LNEC, Lisbon, Portugal (in Portuguese).
Cheng, Y. P. (2004). “A micro-mechanical modeling of soil plasticity.” Ph.D. dissertation, Cambridge Univ., Cambridge, U.K.
Cheng, Y. P., Bolton, M. D., and Nakata, Y. (2005). “Grain crushing and critical strates observed in DEM simulations.” Powders and grains, Taylor & Francis, London, 1393–1397.
Cheng, Y. P., Nakata, Y., and Bolton, M. D. (2003). “Discrete element simulations of crushable soil.” Géotechnique, 53(7), 633–641.
Coop, M. R. (1990). “The mechanics of uncemented carbonate sands.” Géotechnique, 40(4), 607–626.
Coop, M. R., Sorensen, K. K., Bodas Freitas, T., and Georgoutsos, G. (2004). “Particle breakage during shearing of carbonate sands.” Géotechnique, 54(3), 157–163.
Duncan, J., Wright, S., and Brandon, T. (2014). Soil strength in slope stability, Wiley, Hoboken, NJ.
Griffith, A. A. (1921). “The phenomena of rupture and flow solids.” Philos. Trans., 221, 180.
Holm, T. A., and Vansangkar, A. J. (1993). “Lightweight aggregate soil mechanics: Properties and applications.”, Transportation Research Board, Washington, DC, 7–13.
Joisel, A. (1962). La rupture des corps fragiles au cours de leur fragmentation, Publication Technique CERILH, Centre d'études et de recherches de l'industrie des liants hydrauliques, Paris (in French).
Lade, P. V., Yamamuro, J. A., and Bopp, P. A. (1996). “Significance of particle crushing in granular material.” J. Geotech. Eng., 309–316.
Maranha das Neves, E. (2002). “Some considerations about rockfill mechanics.” Soils Rocks, 25(3), 161–203.
Marsal, R. J. (1969). “Particle breakage in coarse granular soils.” Proc., 7th ICSMFE, Sociedad Mexicana de Mecanica, Mexico City, 155–165.
Marsal, R. J. (1973). Mechanical properties of rockfill, Wiley, New York, 109–200.
McDowell, G., and Bolton, M. D. (1998). “On the micromechanics of crushable aggregates.” Géotechnique, 48(5), 667–679.
McDowell, G., Bolton, M. D., and Robertson, D. (1996). “The fractal crushing of granular material.” Int. J. Mech. Phys. Solids, 44(12), 2079–2101.
McDowell, G. R., and Hrireche, O. (2002). “Discrete element modelling of soil particle fracture.” Géotechnique, 52(2), 131–135.
Oldecop, L. A. (2000). “Rockfill compressibility. Influence of humidity.” Ph.D. thesis, Escuela de Caminos, Canales y Puertos, Universidad Politécnica da Cataluña, Barcelona, Spain (in Spanish).
Parkin, A. K. (1991). Rockfill modeling, Vol. 200, Kluwer, Netherlands, 35–51.
Saride, S., Puppala, A., Williammee, R., and Sirigiripet, S. (2010). “Use of lightweight ECS as a fill material to control approach embankment settlements.” J. Mater. Civ. Eng., 607–617.
Schofield, A. N. (1980). “Cambridge geotechnical centrifuge operations.” Géotechnique, 30(3), 227–268.
Van Genuchten, M. T. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Veiga Pinto, A. (1983). “Prediction of the structural behavior of rockfill dams.” Tese de Doutoramento, Laboratório Nacional de Engenharia Civil, Lisbon, Portugal (in Portuguese).
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 27 • Issue 11 • November 2015
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jun 3, 2014
Accepted: Jan 26, 2015
Published online: Mar 12, 2015
Discussion open until: Aug 12, 2015
Published in print: Nov 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.