Preparation, Property Tests, and Limited Chain Model of Magnetorheological Fluid
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 8
Abstract
Magnetorheological (MR) fluids are a new type of smart material whose performance can be evaluated by considering three important factors: stability, viscosity, and shear yield stress of the fluids. In this study, to produce fine, antisettling, and well-dispersed MR fluids, appropriate components and preparation techniques were adopted and a surface treatment method was developed involving different surfactants. Property tests of the MR fluids were conducted, and the results demonstrated that the proposed preparation method decelerated the sedimentation of MR fluids, that the viscosity of the MR fluids varied with temperature and shear rate, and that liquid paraffin can reduce the viscosity of the MR fluids more gradually than oleic acid. In addition, variations in shear yield stress with magnetic induction intensity and volume fraction were determined. To accurately describe the shear yield stress of the MR fluids, a limited chain model that considers the spatial distribution of carbonyl iron (CI) particles, model size, and magnetic saturation phenomenon was proposed. A comparison between the theoretical and experimental values obtained in this study indicates that a seventh-order limited chain model can effectively calculate the shear stress of MR fluids.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The study was financially supported by NSAF of China (11176008), Jiangsu Province Natural Science Foundation (BK20140025). This supports is gratefully acknowledged.
References
Barski, M., Chwał, M., and Kędziora, P. (2013). “Molecular dynamics in simulation of magneto-rheological fluids behavior.” Key Eng. Mater., 542, 11–27.
Cheng, H. B., Wang, J. M., Zhang, Q. J., and Wereley, N. M. (2009). “Preparation of composite magnetic particles and aqueous magnetorheological fluids.” Smart Mater. Struct., 18(8), 085009.
Du, C. B., Chen, W. Q., and Wan, F. X. (2010). “Influence of HLB parameters of surfactants on properties of magneto-rheological fluid.” Adv. Mater. Res., 97, 843–847.
Ginder, J. M., Davis, L. C., and Elie, L. D. (1996). “Rheology of magnetorheological fluids: Models and measurements.” Int. J. Mod. Phys. B, 10(23–24), 3293–3303.
Hong, S. R., Wereley, N. M., Choi, Y. T., and Choi, S. B. (2008). “Analytical and experimental validation of a nondimensional Bingham model for mixed-mode magnetorheological dampers.” J. Sound Vib., 312(3), 399–417.
Iglesias, G. R., Lopez-Lopez, M. T., Duran, J. D. G., Gonzalez-Caballero, F., and Delgado, A. V. (2012). “Dynamic characterization of extremely bidisperse magnetorheological fluids.” J. Colloid Interface Sci., 377(1), 153–159.
Jang, K. I., Min, B. K., and Seok, J. (2011). “A behavior model of a magnetorheological fluid in direct shear mode.” J. Magn. Magn. Mater., 323(10), 1324–1329.
Jang, K. I., Seok, J., Min, B. K., and Lee, S. J. (2009). “Behavioral model for magnetorheological fluid under a magnetic field using Lekner summation method.” J. Magn. Magn. Mater., 321(9), 1167–1176.
Jiang, W. Q., et al. (2010). “Poly (methyl methacrylate)-coated carbonyl iron particles and their magnetorheological characteristics.” Polym. Int., 59(7), 879–883.
Jolly, M. R., Carlson, J. D., and Munoz, B. C. (1996). “A model of the behaviour of magnetorheological materials.” Smart Mater. Struct., 5(5), 607–614.
Keaveny, E. E., and Maxey, M. R. (2008). “Modeling the magnetic interactions between paramagnetic beads in magnetorheological fluids.” J. Comput. Phys., 227(22), 9554–9571.
Lee, D. W., Choi, J. Y., Cho, M. W., Lee, C. H., Cho, W. O., and Yun, H. C. (2012). “Tribological characteristics in modified magneto-rheological fluid.” Appl. Mech. Mater., 110–116, 225–231.
Li, J. M., Chao, Y. S., Zhou, D. C., and Li, C. A. (2010). “Preparation of reduced iron powders magnetorheological fluid using iron scale.” Mater. Mech. Eng., 24(10), 46–49.
Li, W. H., and Zhang, X. Z. (2008). “The effect of friction on magnetorheological fluids.” Korea Aust. Rheol. J., 20(2), 45–50.
Liu, X. H., Lu, H., Chen, Q. Q., Wang, D. D., and Zhen, X. J. (2013). “Study on the preparation and properties of silicone oil-based magnetorheological fluids.” Mater. Manuf. Processes, 28(6), 631–636.
Powell, L. A., Wereley, N. M., and Ulicny, J. (2012). “Magnetorheological fluids employing substitution of nonmagnetic for magnetic particles to increase yield stress.” IEEE Trans. Magn., 48(11), 3764–3767.
Rabinow, J. (1948). “The magnetic fluid clutch.” Electr. Eng., 67(12), 1167.
Stokes, G. G. (1845). “On the theories of the internal friction in fluids in motion, and of the equilibrium and motion of elastic solids.” Trans. Cambridge Philos. Soc., 8, 287–305.
Ulicny, J. C., and Mance, A. M. (2004). “Evaluation of electroless nickel surface treatment for iron powder used in MR fluids.” Mater. Sci. Eng. A, 369(1), 309–313.
Xu, Z. D., and Guo, Y. Q. (2006). “Fuzzy control method for earthquake mitigation structures with magnetorheological dampers.” J. Intell. Mater. Syst., 17(10), 871–881.
Xu, Z. D., Jia, D. H., and Zhang, X. C. (2012). “Performance tests and mathematical model considering magnetic saturation for magnetorheological damper.” J. Intell. Mater. Syst. Struct., 23(12), 1331–1349.
Xu, Z. D., Shen, Y. P., and Guo, Y. Q. (2003). “Semi-active control of structures incorporated with magnetorheological dampers using neural networks.” Smart Mater. Struct., 12(1), 80–87.
Zhang, J., Zhang, J. Q., and Jia, J. F. (2008). “Characteristic analysis of magnetorheological fluid based on different carriers.” J. Cent. South Univ. Technol., 15, 252–255.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 11, 2014
Accepted: Sep 2, 2014
Published online: Oct 9, 2014
Discussion open until: Mar 9, 2015
Published in print: Aug 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.