Miniature Concrete Prism Test: Rapid Test Method for Evaluating Alkali-Silica Reactivity of Aggregates
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 7
Abstract
Existing test methods to assess alkali-silica reactivity of aggregates such as the accelerated mortar bar test (AMBT) has been shown to be less than satisfactory due to excessive false-positive and false-negative test results. While the concrete prism test (CPT) test is considered to be a more reliable alternative, the unusually long test duration (1 or 2 years, depending on the purpose) renders it unsuitable for routine evaluation of materials. This paper presents a new test method—the miniature concrete prism test (MCPT) that addresses the shortcomings of both the AMBT and the CPT test methods. The aggregates studied in this project were selected based on their established field performance. Results from this investigation indicate that the MCPT test method can reliably identify aggregate reactivity within a short duration of 56 days for the majority of aggregates, whereas it may take up to 84 days for some slowly reactive aggregates.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to express their sincere gratitude and appreciation to the Federal Highway Administration (FHWA) for funding this research through Solicitation No. DTFH61-08-R-00010. Also, thanks are extended to aggregate producers and the Lehigh Cement Company for providing the materials to conduct this research.
References
American Concrete Institute. (1991). “Standard practice for selecting proportions for normal, heavyweight, and mass concrete.” 211.1-91, Farmington Hills, MI.
ASTM. (2007a). “Standard test method for concrete aggregates by determination of length change of concrete due to alkali-silica reaction.” C1293, West Conshohocken, PA.
ASTM. (2007b). “Standard test method for potential alkali reactivity of aggregates (Mortar-Bar method).” C1260, West Conshohocken, PA.
Berube, M. A., Dupont, N., Fournier, B., Frenette, J., Mongeau, P., and Ouellet, C. (1992). “‘Effectiveness of the accelerated mortar method.’ ASTM C-9 proposal P214 or NBRI, for assessing potential AAR in Quebec (Canada).” Proc., 9th Int. Conf. on Alkali-Aggregate Reaction in Concrete, London, 92–109.
Berube, M. A., and Fournier, B. (1993). “Canadian experience with testing for alkali-aggregate reactivity in concrete.” Cem. Concr. Compos., 15(1–2), 27–47.
Canadian Standards Association. (1994a). “Test method for detection of alkali-silica reactive aggregate by accelerated expansion of mortar bars.” A23.2-25A, Toronto, ON, Canada.
Canadian Standards Association. (1994b). “Potential expansivity of aggregates; procedure for length change due to alkali-aggregate reaction in concrete prisms.” A23.2-14A, Toronto, ON, Canada.
Chau, L., Chih, C. L., and Wei, C. (2004). “An accelerated concrete prism soaking test for evaluating the alkali reactivity of aggregates.” Proc., 12th Int. Conf. on Alkali-Aggregate Reaction, Beijing, 273–281.
Davies, G., and Oberholster, R. E. (1986). “An accelerated method for testing the potential alkali reactivity of siliceous aggregates.” Cem. Concr. Res., 16(2),181–189.
DeMerchant, D. P., Fournier, B., and Strang, F. (2000). “Alkali aggregate research in New Brunswick.” Can. J. Civil Eng., 27(2), 212–225.
Eric, F., and Marie de, G. (2000). “Evaluation of the potential alkali-reactivity of concrete aggregates: Performance of testing methods and a producer’s point of view.” Proc., of the 11th Int. Conf. on Alkali-Aggregate Reaction, QC, Canada, 267–276.
Folliard, K., Fournier, B., Ideker, J., Shehata, M., and Thomas, M. (2006). “Test methods for evaluating preventive measures for controlling expansion due to alkali–silica reaction in concrete.” Cem. Concr. Res., 36(10), 1842–1856.
Rangaraju, P. R., and Sompura, K. (2005). “Influence of cement composition on expansions observed in standard and modified ASTM C1260 test procedures.” Transp. Res. Rec. J. Transp. Res. Board, 1914(1), 53–60.
RILEM Recommended Test Method AAR-2. (2000a). “Detection of potential alkali-reactivity of aggregates—The ultra-accelerated mortar-bar test.” Mater. Struct., 33(5), 283–289.
RILEM Recommended Test Method AAR-3. (2000b). “Detection of potential alkali-reactivity of aggregates—Method for aggregate combinations using concrete prisms.” Mater. Struct., 33(229), 290–293.
Stanton, T. E. (1940). “Expansion of concrete through reaction between cement and aggregate.” Proc. Am. Soc. Civ. Eng., 1781–1811.
Stanton, T. E. (1942). “California experience with the expansion of concrete through reaction between cement and aggregate.” ACI J. Proc., 38, 209.
Thomas, M. et al. (2006). “Test methods for evaluating preventive measures for controlling expansion due to alkali-silica reaction in concrete.”, TX.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 21, 2013
Accepted: Aug 20, 2014
Published online: Sep 22, 2014
Discussion open until: Feb 22, 2015
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.