Influence of Embedded Waste-Plastic Fibers on the Improvement of the Tensile Strength of Stabilized Mud Masonry Blocks
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 7
Abstract
This paper highlights the results of an experimental investigation on the tensile strength behavior of plastic-fiber-reinforced soil performed to study the possibility of utilization of waste plastics in soil masonry blocks. Cylindrical specimens of raw soil and modified soil compacted at different pressure by varying the molding pressure from 1.25 to 7.5 MPa corresponding to a molding load from 10 to 60 kN are tested for split tensile strength and compressive strength. Raw soil is modified by adding a varying the amount of stabilizer (cement: 7.5, 10, and 15%), fiber types (made out of mineral water bottles and carry bags), fiber length (1 and 2 cm), and fiber percentage (0.1 and 0.2%). The results show that compared with raw specimens, a compacted reinforced cement stabilized specimen shows an increase of 4.5 times in its tensile strength. This is one of the major advantages of adding fibers to the compressed stabilized specimens. From the observations of failure pattern it can be concluded that the benefit of fiber reinforcement is the improved ductility.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial assistance rendered by Kerala State Council for Science, Technology and Environment (KSCSTE), India, in carrying out this study is gratefully acknowledged.
References
Bahar, R., Benazzoug, M., and Kenai, S. (2004). “Performance of compacted cement-stabilised soil.” Cem. Concr. Compos., 26(7), 811–820.
Binici, H., Aksogan, O., Bakbak, D., Kaplan, H., and Isik, B. (2009). “Sound insulation of fiber reinforced mud brick walls.” Constr. Build. Mater., 23(2), 1035–1041.
Binici, H., Aksogan, O., Bodur, M. N., Akca, E., and Kapur, S. (2007). “Thermal isolation and mechanical properties of fiber reinforced mud bricks as wall materials.” Constr. Build. Mater., 21(4), 901–906.
Binici, H., Aksogan, O., and Shah, T. (2005). “Investigation of fiber reinforced mud brick as a building material.” Constr. Build. Mater., 19(4), 313–318.
British Standards. (1970). “Method of testing of concrete for strength.”, London.
Bureau of Indian Standards (BIS). (1982). “Specifications for soil based blocks used in general building construction.”, New Delhi, India.
Bureau of Indian Standards (BIS). (1989). “Specification for 43 grade ordinary portland cement.”, New Delhi, India.
Bureau of Indian Standards (BIS). (1992). “Method of test for burnt clay building bricks.”, New Delhi, India.
Chan, C.-M. (2011). “Effect of natural fibers inclusion in clay bricks: Physico-mechanical properties.” Int. J. Civ. Environ. Eng., 3(1), 51–57.
Galan-Marin, C., Rivera-Gomez, C., and Petric, J. (2010). “Clay based composite stabilised with natural polymer and fiber.” Constr. Build. Mater., 24(8), 1462–1468.
Hendry, A. W. (1981). Structural brick work, Macmillan, London.
Marandi, S. M., Bagheripour, M. H., Rahgozar, R., and Zare, H. (2008). “Strength and durability of randomly distributed palm fibers reinforced silty-sand soil.” Am. J. Appl. Sci., 5(3), 209–220.
Mesbah, A., Morel, J. C., Walker, P., and Ghavami, Kh. (2004). “Development of a direct tensile test for compacted earth blocks reinforced with natural fibers.” J. Mater. Civ. Eng., 95–98.
Morel, J. C., Ghavami, K., and Mesbah, A. (2000). “Theoretical and experimental analysis of composite soil blocks reinforced with sisal F\fibers subjected to shear.” Masonry Int., 13(2), 54–62.
Morel, J. C., Pkla, A., and Walker, P. (2007). “Compressive strength testing of compressed earth blocks.” Constr. Build. Mater., 21(2), 303–309.
Oliver, M., and Gharbi, Z. El. (1995). “Sisal fiber reinforced soil block masonry.” Proc., 4th Int. Masonry Conf., British Masonry Society, London, 55–58.
Prasad, C. K. S., Abraham, B. M., and Nambiar, E. K. K. (2014). “Sorption characteristics of stabilised soil blocks embedded with waste plastic fibers.” Constr. Build. Mater., 63, 25–32.
Prasad, C. K. S., Nambiar, E. K. K., and Abraham, B. M. (2012a). “Compressive strength behaviour of plastic fiber reinforced soil specimens manufactured under varying moulding loads.” J. Int. Masonry Soc. Masonry Int., 25(3), 71–78.
Prasad, C. K. S., Nambiar, E. K. K., and Abraham, B. M. (2012b). “Plastic fibre reinforced soil blocks as a sustainable building material.” Int. J. Adv. Res. Technol., 1(5), 42–45.
Swan, J., Rteil, A., and Lovegrove, G. (2011). “Sustainable earthen and straw bale construction in North American buildings: Code of practice.” J. Mater. Civ. Eng., 866–872.
Walker, P. (1995). “Performance of stabilised soil blocks masonry under uniform and concentrated compressive loading.” Proc., 4th Int. Masonry Conf., Vol. 7, British Masonry Society, London, 49–54.
Walker, P., and Stace, T. (1997). “Properties of some cement stabilized compressed earth blocks and mortars.” Mater. Struct., 30(9), 545–551.
Walker, P. J. (2004). “Strength and erosion characteristics of earth blocks and earth block masonry.” J. Mater. Civ. Eng., 497–506.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 7, 2014
Accepted: Jul 22, 2014
Published online: Aug 25, 2014
Discussion open until: Jan 25, 2015
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.