Tensile Properties of an Engineered Cementitious Composite Shotcrete Mix
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 7
Abstract
Results are presented for a series of laboratory tests that were undertaken to characterize the tensile properties of an engineered cementitious composite (ECC) mix, which is a mortar-based composite reinforced with synthetic fibers to provide tensile strain–hardening characteristics. Dogbone-, rectangular-, and circular-bar-shaped specimens were developed to determine the most suitable specimen geometry for uniaxial tensile testing (UTT), with the circular-bar specimens that were constructed by coring through sprayed ECC panels showing the best geometrical consistency, both within each specimen and between individual specimens. Fifty circular-bar specimens with a diameter of 16 mm and a length of 200 mm were tested under uniaxial tension to determine the characteristic tensile properties. Statistical distributions were used to define a 5% characteristic tensile yield strength of 1.82 MPa and a 10% tensile total strain of 0.08%. A material ductility factor of 4.0 was determined, and factors are proposed to convert quality assurance test mean values to characteristic values.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to acknowledge Royce Finlayson, Michael Ryan, Bing Zhang, Karl Yuan, and Anthony Le Dain for their assistance in sample production, preparation, and testing. The authors would also like to thank Derek Lawley, David Nevans, Michael Barry, and Roydon Gilmour from Reid Construction Systems for providing some of the equipment required for this study. Last, the authors would like to acknowledge the financial support of The New Zealand Ministry of Science and Innovation and the New Zealand Earthquake Commission.
References
Agarwal, P., and Shrikhande, M. (2006). Earthquake resistant design of structures, Prentice-Hall of India, New Delhi, India.
ASCE. (1996). “Standard for load and resistance factor design LRFD for engineered wood construction.”, Reston, VA.
ASCE. (2005). “Minimum design loads for buildings and other structures.”, Reston, VA.
Barragan, B. E., Gettu, R., Martin, M. A., and Zerbino, R. (2003). “Uniaxial tension test for steel fiber reinforced concrete: A parametric study.” Cem. Concr. Compos., 25(7), 767–777.
Bernard, E. S., Xu, G. G., and Carino, N. J. (2010). “Influence of the number of replicates in a batch on apparent variability in FRC and FRS performance assessed using ASTM C1550 Panels.” Proc., 3rd Int. Shotcrete Conf., Taylor and Francis, London, U.K.
European Committee for Standarzation (CEN). (1992). “Eurocode 2—Design of concrete structures.”, Brussels, Belgium.
European Federation of National Associations Representing Concrete (EFNARC). (1996). “European specification for sprayed concrete.”, Surrey, U.K.
Fisher, R. A. (1925). Statistical methods for research workers, Oliver and Boyd, Edinburgh, U.K.
Fisher, R. A. (1926). “The arrangement of field experiments” J. Ministry Agric. Great Britain, 33, 503–513.
Galambos, T. V., Ellingwood, B., MacGregor, J. G., and Cornell, C. A. (1982). “Probability based load criteria: Assessment of current design practice.” J. Struct. Div., 108(5), 959–977.
Japan Society of Civil Engineers (JSCE) (2008). Recommendations for design and construction of high performance fiber reinforced cement composites with multiple fine cracks (HPFRCC), Tokyo, Japan, 1–88.
Kanakubo, T. (2006). “Tensile characteristics evaluation method for ductile fiber-reinforced cementitious composites.” J. Adv. Concr. Technol., 4(1), 3–17.
Kanda, T., Saito, T., Sakata, N., and Hiraishi, M. (2003). “Tensile and anti-spalling properties of direct sprayed ECC.” J. Adv. Concr., 1(3), 269–282.
Kim, Y. Y., Fischer, G., and Li, V. C. (2004a). “Performance of bridge deck link slabs designed with ductile engineered cementitious composite.” ACI Struct. J., 101(6), 792–801.
Kim, Y., Fischer, G., Lim, Y., and Li, V. (2004b). “Mechanical performance of sprayed engineered cementitious composite using wet-mix shotcreting process for repair applications.” ACI Mater. J., 101(1), 42–49.
Kim, Y. Y., Kong, H., and Li, V. C. (2003). “Design of engineered cementitious composite suitable for wet-mixture shotcreting.” ACI Mater. J., 100(6), 511–518.
Kocaoz, S., Samaranayake, V. A., and Nanni, A. (2005). “Tensile characterization of glass FRP bars.” Compos. Part B Eng., 36(2), 127–134.
Kong, H. J., Bike, S. G., and Li, V. C. (2003). “Constitutive rheological control to develop a self-consolidating engineered cementitious composite reinforced with hydrophilic polyvinyl alcohol fibers.” Cem. Concr. Compos., 25(3), 333–341.
Kyriakides, M. A., and Billington, S. A. (2013). “Strengthening of masonry using sprayed strain hardening cement-based composites (SHCC).” Seventh RILEM Symp. on HPFRCC, China Earthquake Administration Ministry of Construction, China.
Kyriakides, M. A., and Billington, S. L. (2008). “Seismic retrofit of masonry-infilled non-ductile reinforced concrete frames using sprayable ductile fiber-reinforced cementitous composites.” 14th World Conf. on Earthquake Engineering, Beijing, China.
Lawless, J. F. (1982). Statistical models and methods for lifetime data, Wiley, New York.
Leung, C. K. Y., Lai, R., and Lee, A. Y. F. (2005). “Properties of wet-mixed fiber reinforced shotcrete and fiber reinforced concrete with similar composition.” Cem. Concr. Res., 35(4), 788–795.
Li, V. C., Horii, H., Kabele, P., Kanda, T., and Lim, Y. (2000). “Repair and retrofit with engineered cementitious composites.” Eng. Fract. Mech., 65(2–3), 317–334.
Lin, Y., Derakhshan, H., Dizhur, D., Lumantarna, R., Wotherspoon, L., and Ingham, J. M. (2011). “Testing and seismic retrofit of 1917 wintec F block URM building in Hamilton.” SESOC, 24(1), 47–57.
Lin, Y., Lawley, D., Wotherspoon, L, and Ingham, J. M. (2010). “Seismic retrofitting of an unreinforced masonry building using ECC shotcrete.” New Zealand Concrete Industry Conf., NZ Concrete Society, Auckland, New Zealand.
Lorenzis, L. D., and Nanni, A. (2001). “Characterization of FRP rods as near-surface mounted reinforcement.” J. Compos. Constr., 114–121.
MacGregor, J. G., Mirza, S. A., and Ellingwood, B. (1983). “Statistical analysis of resistance of reinforced and prestressed concrete members.” J. Am. Concr. Inst., 80(3), 167–176.
Nataraja, M. C., Dhang, N., and Gupta, A. P. (1999). “Statistical variations in impact resistance of steel fiber-reinforced concrete subjected to drop weight test.” Cem. Concr. Res., 29(7), 989–995.
National Research Council (NRC). (2006). “Guide for the design and construction of fiber-reinforced concrete structures.”, Rome, Italy.
New Zealand Standards (NZS). (2001). “Steel reinforcing materials.”, Wellington, New Zealand.
New Zealand Standards (NZS). (2010). “Characterization of structural timber.”, Wellington, New Zealand.
Ostergaard, L., Walter, R., and Olesen, J. F. (2005). “Method for determination of tensile properties of engineered cementitious composites (ECC).” Conf. on Construction Materials, RILEM, Bagneux, France.
R Foundation. (2012). “The R Foundation for statistical computing.” 〈http://www.r-project.org/foundation/main.html〉 (Dec. 5, 2012).
Soroushian, P., Nagi, M., and Alhozaim, A. (1992). “Statistical variations in the mechanical properties of carbon fiber reinforced cement composites.” ACI Mater. J., 89(2), 131–138.
Stang, H., and Li, V. C. (2004). “Classification of fiber reinforced cementitious material for structural applications.” Sixth Rilem Symp. on Fiber Reinforced Concrete, RILEM, Bagneux, France.
Toutanji, H. A., El-Korchi, T., and Katz, R. N. (1994). “Strength and reliability of carbon-fiber-reinforced cement composites.” Cem. Concr. Compos., 16(1), 15–21.
Yang, E. H., Yang, Y., and Li, V. C. (2007). “Use of high volume fly ash to improve ECC mechanical properties and material greenness.” ACI Mater. J., 104(6), 301–311.
Zureick, A. H., Bennett, R. M., and Ellingwood, B. R. (2006). “Statistical characterization of fiber-reinforced polymer composite material properties for structural design.” J. Struct. Eng., 1320–1327.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 20, 2013
Accepted: Jul 17, 2014
Published online: Sep 2, 2014
Discussion open until: Feb 2, 2015
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.