Bayesian Method to Determine the Dynamic Material Characteristics of Hot-Mix Asphalt
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 4
Abstract
A reliable method for determining the dynamic material characteristics of hot-mix asphalt using a Bayesian method based on Latin hypercube sampling, impact resonance testing (IRT), and the shift factor of linear viscoelastic (LVE) asphalt concrete specimens is reported. Discrete resonance moduli data were obtained from the IRT at temperatures of 5, 25, 40, and 50°C. The shift factor of the LVE was used to translate the discrete points of resonance moduli to higher or lower frequencies, depending on the temperature of the specimen. Based on the temperature–frequency combinations, Bayesian statistical predictions were used to create a dynamic modulus master-curve representation, using the resonance moduli data and Latin hypercube sampling. The results for three different hot-mix asphalt mixtures were in good agreement with dynamic moduli data obtained using other testing methods.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIP) (No. 2011-0030040).
References
AASHTO. (2005). “Standard method of test for determining dynamic modulus of hot-mix asphalt concrete mixtures.”, Washington, DC.
Bažant, Z. P., and Kim, J.-K. (1989). “Segmental box girder: Deflection probability and Bayesian updating.” J. Struct. Eng., 2528–2547.
Chehab, G. R. (2002). “Characterization of asphalt concrete in tension using a viscoelastoplastic model.” Ph.D. dissertation, North Carolina State Univ., Raleigh, NC.
Ching, J., and Leu, S.-S. (2009). “Bayesian updating of reliability of civil infrastructure facilities based on condition-stat data and fault-tree model.” Reliab. Eng. Syst. Saf., 94(12), 1962–1974.
Emri, I., and Tschoegl, N. W. (1993). “Generating line spectra from experimental responses. Part I: Relaxation modulus and creep compliance.” Rheologica Acta, 32(3), 311–321.
Iman, R. L., and Conover, W. J. (1980). “Small sample sensitivity analysis techniques for computer models, with an application to risk assessment.” Comm. Stat. Theor. Meth., 9(17), 1749–1842.
Keitel, H., Dimmig-Osburg, A., Vandewalle, L., and Schueremans, L. (2012). “Selecting creep models using Bayesian methods.” Mater. Struct., 45(10), 1513–1533.
Kim, Y. R. (2009). Modeling of asphalt concrete, McGraw-Hill Professional, New York.
Kim, Y. R., Seo, Y., and Momen, M. (2004). “Dynamic modulus testing of asphalt concrete in indirect tension mode.”, Transportation Research Board, Washington, DC, 163–173.
Kuai, H., Lee, H.-J., Zi, G., and Mun, S. (2009). “Application of generalized J-integral to crack propagation modeling of asphalt concrete under repeated loading.”, Transportation Research Board, Washington, DC, 72–81.
Kweon, G., and Kim, Y. R. (2006). “Determination of the complex modulus of asphalt concrete using the impact resonance test.”, Transportation Research Board, Washington, DC, 151–160.
Lacroix, A., Kim, Y. R., Sadat, M., and Far, S. (2009). “Constructing the dynamic modulus mastercurve using impact resonance testing.” J. Assoc. Asphalt Paving Technol., 78, 67–102.
Lee, S., and Knauss, W. G. (2000). “A note on the determination of relaxation and creep data from ramp tests.” Mech. Time-Dependent Mater., 4(1), 1–7.
Mckay, M. D., Beckman, R. J., and Conover, W. J. (2000). “A comparison of three methods for selecting values of input variables in the analysis of output from a computer code.” Technometrics, 42(1), 55–61.
Mun, S., Chehab, G. R., and Kim, Y. R. (2007). “Determination of time-domain viscoelastic functions using optimized interconversion techniques.” Road Mater. Pavement Des., 8(2), 351–365.
Mun, S., and Geem, Z.-W. (2009). “Determination of viscoelastic and damage properties of hot mix asphalt concrete using a harmony search algorithm.” Mech. Mater., 41(3), 339–353.
Mun, S., and Lee, S. (2011). “Identification of viscoelastic functions for hot-mix asphalt mixtures using a modified harmony search algorithm.” J. Comput. Civ. Eng., 139–148.
Oyadiji, S. O., and Tomlinson, G. R. (1985). “Determination of the complex moduli of viscoelastic structural elements by resonance and non-resonance methods.” J. Sound Vib., 101(3), 277–278.
Pellinen, T. (2001). “Investigation of the use of dynamic modulus as an indicator of hot-mix asphalt performance.” Ph.D. dissertation, Arizona State Univ., Tempe, AZ.
Tschoegl, N. W. (1997). “Time dependence in material properties: An overview” Mech. Time–Dependent Mater., 1(1), 3–31.
Wang, L., Ravichandran, N., and Juang, C. H. (2012). “Bayesian updating of KJHH model for prediction of maximum ground settlement in braced excavations using centrifuge data.” Comput. Geotech., 44, 1–8.
Whitmoyer, S. L., and Kim, Y. R. (1994). “Determining asphalt concrete properties via the impact resonance method.” J. Test. Eval., 22(2), 139–148.
Witczak, W. M. (2005). “Simple performance test: Summary of recommended methods and database.”, National Research Council, Transportation Research Board, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 30, 2013
Accepted: Apr 3, 2014
Published online: Jul 25, 2014
Discussion open until: Dec 25, 2014
Published in print: Apr 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.