Empirical Estimation of Pore Size Distribution in Cement, Mortar, and Concrete
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Materials in Civil Engineering
Volume 26, Issue 7
Abstract
Pore size distribution is an important factor that affects the moisture diffusion and permeability properties of cement-based materials. For cement paste, it is assumed that the mesopores (100 nm–0.01 mm) and macropores (0.01 mm–1 cm) can be neglected compared to the micropores (). Based on the surface energy theory, moisture chemical potential of pore water is introduced to explain the liquid-gas equilibrium in pores with different radius. Using chemical potential as an intermedium, a quantitative relationship between micropore size distribution and water adsorption isotherms can be established. The micropore size distribution can be treated as an explanation of the moisture adsorption behavior, and by using adsorption isotherms, the micropore size distribution can be estimated conveniently. Mortar and concrete can be regarded as a combination of cement paste and aggregates; thus, besides the micropores, the mesopores and macropores are also taken into consideration. Finally, the general empirical estimation equations for pore-size distribution are developed for cement, mortar, and concrete, which can be used for refined modeling and simulating of durability-related issues, such as frost action, water permeability, and drying shrinkage.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors appreciate the “President Fellowship” provided by Hokkaido University to support the Master’s study and research work. The Research and Development Grant of Japan Institute of Construction Engineering (JICE) is also gratefully acknowledged.
References
Atkins, P., and Paula, J. (2010). Physical chemistry, W. H Freeman and Company, New York.
Baroghel-Bouny, V. (2007). “Water vapor sorption experiments on hardened cementitious materials Part I: Essential tool for analysis of hygral behavior and its relation to pore structure.” Cem. Concr. Res., 37(3), 414–437.
Barrett, E. P., Joyner, L. G., and Halenda, P. P. (1951). “The determination of pore volume and area distribution in porous substances I computation from nitrogen isotherms.” J. Am. Chem. Soc., 73(1), 373–380.
Brun, M. (1977). “A new method for the simultaneous determination of the size and the shape of pores: The thermoporometry.” Thermochimica Acta, 21(1), 59–88.
Brunauer, S. (1969). “Adsorption on nonporous solids.” J. Colloid Interface Sci., 30(4), 546–552.
Brunauer, S., Emmett, P. H., and Teller, E. (1938). “Adsorption of gases in multimolecular layers.” J. Am. Chem. Soc., 60(2), 309–319.
Brunauer, S., Mikhail, R. S., and Bodor, E. E. (1967). “Pore structure analysis without a pore shape model.” J. Colloid Interface Sci., 24(4), 451–463.
Cook, R. A., and Hover, K. C. (1999). “Mercury porosimetry of hardened cement pastes.” Cem. Concr. Res., 29(6), 933–943.
Coussy, O. (2010). Mechanics and physics of porous solids, Wiley, Chichester, West Sussex, U.K.
Daian, J. F. (1988). “Condensation and isothermal water transfer in cement mortar Part I – Pore size distribution, equilibrium water condensation and imbibitions.” Transp. Porous Media, 3(6), 563–589.
Diamond, S. (2000). “Mercury porosimetry: An inappropriate method for the measurement of pore size distribution in cement-based materials.” Cem. Concr. Res., 30(10), 1517–1525.
Fujikura, Y., and Oshita, H. (2011). “Pore structure model of hydrates comprising various cements and SCMs based on changes in particle size of constituent phases.” J. Adv. Concr. Technol., 9(2), 133–147.
Galle, C. (2001). “Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between over-, vacuum-, and freeze-drying.” Cem. Concr. Res., 31(10), 1467–1477.
Giarma, C. (2010). “Proposal of an empirical relationship for moisture storage function of concrete.” Bauphysik, 32(3), 160–166.
Kaufmann, J., Loser, R., and Leemann, A. (2009). “Analysis of cement-bonded materials by multi-cycle mercury intrusion and nitrogen sorption.” J. Colloid Interface Sci., 336(2), 730–737.
Koronthalyova, O. (2011). “Moisture storage and microstructure of ceramic brick and autoclaved aerated concrete.” Constr. Build. Mater., 25(2), 879–885.
Matsumoto, M. (1995). “An analysis of heat and moisture behavior of underground space and its surrounding ground under natural condition.” J. Archit. Plann. Envrion. Eng., 474, 27–36 (in Japanese).
Pradhan, B., Nagesh, M., and Bhattacharjee, B. (2005). “Prediction of the hydraulic diffusivity from pore size distribution of concrete.” Cem. Concr. Res., 35(9), 1724–1733.
Scherer, G. W. (1993). “Freezing gels.” J. Non-Crystalline Solids, 155(1), 1–25.
Scherer, G. W. (2005). “Mechanisms of frost damage.” Materials Science of Concrete, Am. Ceram. Soc., J. Skalny and F. Young, eds., VII, Hokkaido University Press, Sapporo, Japan, 209–246.
Shimomura, T., and Ozawa, K. (1992). “Analysis of water movement in concrete based on micro pore structural model.” Proc. JCI, 14(1), 631–636 (in Japanese).
Sicat, E., and Ueda, T. (2010). “Deformation of concrete mortar with variation in moisture content and under freeze-thaw cycles.” Proc., 2nd Int. Conf. on Durability of Concrete Structures, 537–546.
Takewaka, K., Yamaguchi, T., and Maeda, S. (2003). “Simulation model for deterioration of concrete structures due to chloride attack.” J. Adv. Concr. Technol., 1(2), 139–146.
Uchikawa, H., Uchida, S., and Hanehara, S. (1991). “Measuring method of pore structure in hardened cement paste.” Mortar Concr., 88(2), 67–90.
van Genuchten, M. Th. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Willis, K. L., Abell, A. B., and Lange, D. A. (1998). “Image-based characterization of cement pore structure using Wood’s metal intrusion.” Cem. Concr. Res., 28(12), 1695–1705.
Xi, Y., Bazant, Z. P., and Jennings, H. M. (1994). “Moisture diffusion in cementitious materials adsorption isotherms.” Adv. Cem. Based Mater., 1(6), 248–257.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 15, 2013
Accepted: Sep 18, 2013
Published online: Sep 20, 2013
Published in print: Jul 1, 2014
Discussion open until: Sep 3, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.