Application of Statistical Analysis for Mixture Design of High-Strength Self-Consolidating Concrete Containing Metakaolin
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 6
Abstract
A statistical design of experiments method was applied to optimize the mixture proportions of high-strength self-consolidating concrete (SCC) incorporating metakaolin (MK). The optimization involved varying three mixture factors (variables) at five different levels. These factors included total binder content, percentage of MK in the mixture, and water-to-binder ratio. The statistical analysis was exploited to determine the most significant factors affecting the properties of SCC and the optimum level of each variable. A total of 27 mixtures were tested at both the fresh and hardened states to obtain the best SCC mixture containing MK and to compare its results with SCC mixtures containing other supplementary cementing materials. The fresh properties tests included slump flow, V-funnel, L-box, J-ring, and air content tests. On the other hand, at 28 days, the compressive strength of SCC samples under two curing regimes was evaluated. The results showed that the optimized high-strength SCC mixture had a superior performance in the fresh and hardened states compared with the SCC mixtures containing silica fume, fly ash, or slag. The results of the numerical optimization for SCC mixture containing MK showed optimum levels of total binder content of , water-to-binder ratio of 0.39, and replacement of cement by MK of 19.9%. The results also showed that MK replacement proved to be the most significant factor affecting the 28-day compressive strength of all tested mixtures regardless of curing techniques.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2001). “Standard test method for compressive strength of cylindrical concrete specimens.” C39, West Conshohocken, PA.
ASTM. (2009). “Standard test method for passing ability of self-consolidating concrete by J-ring.” C1621, West Conshohocken, PA.
ASTM. (2010). “Standard test method for air content of freshly mixed concrete by the pressure method.” C231, West Conshohocken, PA.
ASTM. (2011). “Standard test method for slump flow of self-consolidating concrete.” C1611, West Conshohocken, PA.
ASTM. (2012). “Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete.” C618, West Conshohocken, PA.
ASTM. (2013). “Standard specification for chemical admixtures for concrete.” C494/C494M, West Conshohocken, PA.
EFNARC. (2005). “The European guidelines for self-compacting concrete specification, production and use.” European Federation for Specialist Construction Chemicals and Concrete Systems, Norfolk, U.K.
Ghezal, A., and Khayat, K. H. (2002). “Optimizing self-consolidating concrete with limestone filler by using statistical factorial design methods.” ACI Mater. J., 99(3), 264–272.
Lachemi, M., Hossain, K. M. A., Lambros, V., and Bouzoubaâ, N. (2003). “Development of cost-effective self-compacting concrete incorporating fly ash, slag cement, or viscosity-modifying admixtures.” ACI Mater. J., 100(5), 419–425.
Madandoust, R., and Mousavi, S. Y. (2012). “Fresh and hardened properties of self-compacting concrete containing metakaolin.” Constr. Build. Mater., 35, 752–760.
Myers, R. H., Montgomery, D. C., and Anderson-Cook, C. M. (2009). “Response surface methodology: Process and product optimization using designed experiments.” Wiley series in probability and statistics, 3rd Ed., New York.
Patel, R., Hossain, K. M. A., Shehata, M., Bouzoubaâ, N., and Lachemi, M. (2004). “Development of statistical models for mixture design of high-volume fly ash self-consolidating concrete.”ACI Mater. J., 101(4), 294–302.
Precast/Prestressed Concrete Institute (PCI). (2003). “Interim guidelines for the use of self-consolidating concrete in precast/prestressed concrete institute member plants.”, PCI, Chicago.
Sadok, H., Kenai, A., Courard, L., and Darimont, A. (2011). “Microstructure and durability of mortars modified with medium active blast furnace slag.” Constr. Build. Mater., 25(2), 1018–1025.
Schmidt, S. R., and Launsby, R. G. (1994). Understanding industrial designed experiments, 4th Ed., M. J. Kiemele, ed., Air Academic Press, Colorado Springs, CO, 1–48.
Sonebi, M. (2004). “Applications of statistical models in proportioning medium-strength self-consolidating concrete.” ACI Mater. J., 101(5), 339–346.
Vejmelková, E., Keppert, M., Grzeszczyk, S., Skalinski, B., Cerny, R. (2011). “Properties of self-compacting concrete mixtures containing metakaolin and blast furnace slag.” Constr. Build. Mater., 25(3), 1325–1331.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 8, 2013
Accepted: Sep 17, 2013
Published online: Oct 25, 2013
Published in print: Jun 1, 2014
Discussion open until: Aug 20, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.