Pollution and Purification Study of the Pervious Concrete Pavement Material
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 8
Abstract
In this research, the ability of pervious concrete pavement material to reduce pollutant concentrations and purify water was investigated. This project mainly aims to study the ability of pervious concrete pavement material to reduce pollutant concentrations such as those in diluted sulfuric acid, seawater, and motor oil. The results demonstrated that the ability of pervious concrete pavement material to reduce pollutant concentrations and purify water was effective in diluted sulfuric acid, artificial seawater, and motor oil tests. After flowing through pervious concrete pavement, a diluted sulfuric acid solution (pH value 2.0) could dramatically increase its pH value to approximately 7.0. A pervious concrete pavement system could greatly decrease the content of an artificial seawater solution (salinity 36%) to about 1%, and the oil content of motor oil combined with certain types of water could also be significantly decreased to 1%. The study demonstrates that pervious concrete pavement holds potential for environment conservation and hydrologic consideration.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the National Science Council (NSC) of Taiwan (Contract No. NSC-99-2221-E-324-035) and the financial support of the Ministry of Transportation & Communications under grant no. MOTC-IOT-99-H1DB005.
References
American Concrete Institute (ACI). (2002). “Guide for selecting proportions for no-slump concrete.”, Farmington Hills, MI, 1–26.
American Concrete Institute (ACI). (2010). “Pervious concrete.”, Farmington Hills, MI, 1–25.
ASTM. (2007a). “Standard practice for making and curing concrete test specimens in the laboratory.” C192, West Conshohoken, PA.
ASTM. (2007b). “Standard specification for portland cement.” C150, West Conshohoken, PA.
ASTM. (2010). “Standard test method for flexural strength of concrete (using simple beam with center-point loading).” C293, West Conshohoken, PA.
ASTM. (2012a). “Standard practice for making and curing concrete test specimens in the field.” C31, West Conshohoken, PA.
ASTM. (2012b). “Standard test method for compressive strength of cylindrical concrete specimens.” C39, West Conshohoken, PA.
ASTM. (2013). “Standard test method for density and void content of freshly mixed pervious concrete.” C1688, West Conshohoken, PA.
Brattebo, B. O., and Booth, D. B. (2003). “Long-term stormwater quantity and quality performance of permeable pavement systems.” Water Res., 37(18), 4369–4376.
Lan, J., and Liu, B. (2011). “Comparing the purification effects of sewage water treated by different kinds of porous eco-concrete.” Proc., Bioinformatics and Biomedical Engineering, (iCBBE) 5th Int. Conf., EEE Engineering in Medicine and Biology Society, Piscataway, NJ, 1–4.
Lee, M. G., Chiu, C. T., Kan, Y., and Yen, T. (2009). “Experimental study of pervious concrete on parking lot.” ASCE Geotech. Special Publ., 193, 125–131.
Lee, M. G., Chiu, C. T., and Yen, T. (2008). “Application of pervious concrete on transportation engineering ().” Ministry of Transportation and Communications, Taipei, Taiwan, 1–188.
Li, H., Harvey, J., and Jones, D. (2012). “Developing a mechanistic-empirical design procedure for fully permeable pavement under heavy traffic.”, Transportation Research Board, Washington, DC, 83–94.
Newman, A. P., Pratt, C. J., and Cresswell, N. (2002). “Oil bio-degradation in permeable pavements by microbial communities” Water Sci. Technol., 45(7), 51–56.
Park, S. B., Lee, B. J., Lee, J., and Jang, Y. I. (2010). “A study on the seawater purification characteristics of water-permeable concrete using recycled aggregate.” Resour. Conservat. Recycl., 54(10), 658–665.
Park, S. B., and Tia, M. (2004). “An experimental study on the water-purification properties of porous concrete.” Cement Concr. Res., 34(2), 177–84.
Pratt, C. J., Newman, A. P., and Bond, P. C. (1999). “Mineral oil bio-degradation within a permeable pavement: Long term observations.” Water Sci. Technol., 39(2), 103–109.
Tennis, P., Leming, M. L., and Akers, D. J. (2004). “Pervious concrete pavements.”, Portland Cement Association, Skokie, IL, 1–25.
Thomle, J. T. (2010). “The declining pH of waters exposed to pervious concrete.” Master thesis, Washington State Univ., Dept. of Civil and Environmental Engineering.
United States Environmental Protection Agency (EPA). (2000). “Field evaluation of permeable pavements for stormwater management.”, Olympia, WA.
Yang, J., and Jiang, G. (2003). “Experimental study on properties of pervious concrete pavement materials.” Cement Concr. Res., 33(3), 381–386.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 11, 2013
Accepted: Aug 5, 2013
Published online: Aug 7, 2013
Published in print: Aug 1, 2014
Discussion open until: Sep 25, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.